Complementary
product compatibility
XESD2201 for reversing operation
Product certifications
CSA type 4
Control station colour
Yellow
Enclosure type
Complete ready for use
Product or component type
Pendant control station
[uimp] rated impulse withstand voltage
6 kV conforming to IEC 60947-1
Control station type
Double insulated
cable entry
Rubber sleeve with stepped entry 7…13 mm
Connections - terminals
Screw clamp terminals, 1 x 2.5 mm² with or without cable end
Screw clamp terminals, 2 x 1.5 mm² with or without cable end
Enclosure material
Glass reinforced polyester
contact operation
Snap action
rated operational power in w
3000 W at 240 V
3000 W at 400 V
Control station application
Control of single speed hoist motor
Electrical circuit type
Power circuit
Control station composition
2 push-buttons
Net weight
0.355 kg
rated power in hp
3 hp at 240 V
mechanical durability
1000000 cycles
electrical durability
1000000 cycles AC-3, 3000 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A
1000000 cycles AC-4, 3000 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A
700000 cycles AC-3, 3000 W at 240 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A
700000 cycles AC-4, 3000 W at 240 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A
Mechanical interlocking
With mechanical interlocking
control button type
First push-button 3-pole raise, slow
Second push-button 3-pole lower, slow
Operating force
32 N push-button
Shock resistance
100 gn conforming to IEC 60068-2-27
Terminal identifier
(11-12)NC
(13-14)NON
Short-circuit protection
12 A fuse protection by cartridge fuse type aM
Terminals description iso n°1
(13-14)NON
(23-24)NON
(63-64)NON
(53-54)NON
(73-74)NON
(33-34) NON
Environment
Ambient air temp for storage/transportation
-40…70 °C
ip degree of protection
IP65 conforming to IEC 60529
Range of product
Harmony XAC
ambient air temperature for operation
-25…70 °C
overvoltage category
Class II conforming to IEC 61140
standards
EN/IEC 60947-5-1
EN/IEC 60204-32
CSA C22.2 No 14
vibration resistance
15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6
protective treatment
TH