RM17JC00MW - Harmony, Modular current control relay, 5 A, 1 CO, overcurrent function, 250 V AC/DC - Schneider Electric

Expected in 2-4 weeks

74,95 €

Text About:

Harmony, Modular current control relay, 5 A, 1 CO, overcurrent function, 250 V AC/DC - Schneider Electric

In cart

74,95 €

SPECIFICATIONS

Main

Measurement range 2...20 A current

Relay monitored parameters Overcurrent detection

switching capacity in va 1250 VA

Relay type Current control relay

relay name RM17JC

[ui] rated insulation voltage 400 V conforming to IEC 60664-1

threshold setting 10...100 %

Complementary

maximum power consumption in va 3 VA

Product certifications GL
C-Tick
GOST
UL
CSA

response time < 200 ms (in the event of a fault)

output contacts 1 C/O

Product or component type Current control relay

tightening torque 0.6…1 N.m conforming to IEC 60947-1

[us] rated supply voltage 24...240 V AC/DC 50/60 Hz +/- 10 %

Connections - terminals Screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end
Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end
Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end
Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end

minimum switching current 10 mA at 5 V DC

marking CE : 73/23/EEC
CE : EMC 89/336/EEC

Contacts material Cadmium free

Delay at power up 0.5 s

hysteresis 15 % fixed of threshold setting

Contacts type and composition 1 C/O

input current 100000 mA permanent at 25 °C
300000 mA non repetitive < 3 s at 25 °C

maximum measuring cycle 30 ms measurement cycle as true rms value

width (w) 17.5 mm

control circuit frequency 40...70 Hz sinusoidal

supply voltage limits 20.4…264 V AC/DC

Local signalling LED (green) for power ON
LED (yellow) for relay ON

Net weight 0.13 kg

measurement error +/- 0.05 %/°C with temperature variation
< 1 % over the whole range with voltage variation

measurement accuracy +/- 10 % of the full scale value

Operating position Any position without derating

Immunity to microbreaks 10 ms

Mounting support 35 mm symmetrical DIN rail conforming to EN/IEC 60715

mechanical durability 30000000 cycles

electrical durability 100000 cycles

repeat accuracy +/- 0.5 % for input and measurement circuit

Housing material Self-extinguishing plastic

Pollution degree 3 conforming to IEC 60664-1

maximum power consumption in w 1 W

polarity Yes DC

Maximum switching voltage 250 V AC/DC

Insulation Between supply and measurement

Operating rate <= 360 operations/hour full load

Shock resistance 15 gn for 11 ms conforming to IEC 60255-21-1

operating voltage tolerance - 15 % + 10 % Un

Utilisation category AC-12 conforming to IEC 60947-5-1
AC-13 conforming to IEC 60947-5-1
AC-14 conforming to IEC 60947-5-1
AC-15 conforming to IEC 60947-5-1
DC-12 conforming to IEC 60947-5-1
DC-13 conforming to IEC 60947-5-1
DC-14 conforming to IEC 60947-5-1

Nominal output current 5 A

Time delay Without

Environment

Ambient air temp for storage/transportation -40…70 °C

ip degree of protection IP20 (terminals) conforming to IEC 60529
IP30 (casing) conforming to IEC 60529

Range of product Harmony Control Relays

ambient air temperature for operation -20…50 °C

electromagnetic compatibility Emission standard for industrial environments conforming to EN/IEC 61000-6-4
Emission standard for residential, commercial and light-industrial environments conforming to EN/IEC 61000-6-3
Immunity for industrial environments conforming to NF EN/IEC 61000-6-2

Non-dissipating shock wave 4 kV

overvoltage category III conforming to IEC 60664-1

standards EN/IEC 60255-6

relative humidity 95 % at 55 °C conforming to IEC 60068-2-30

vibration resistance 0.35 mm (f= 5…57.6 Hz) conforming to IEC 60068-2-6
1 gn (f= 57.6…150 Hz) conforming to IEC 60255-21-1

dielectric test voltage 2 kV AC 50 Hz

insulation resistance > 500 MOhm at 500 V DC conforming to IEC 60255-5
> 500 MOhm at 500 V DC conforming to IEC 60664-1