METSEPM5111 - power meter PowerLogic PM5111, modbus, up to 15th Harmonic, 1DO 33 alarms, MID - Schneider Electric

Expected in 2-4 weeks

405,47 € excl. VAT

494,67 € incl. VAT

Text About:

power meter PowerLogic PM5111, modbus, up to 15th Harmonic, 1DO 33 alarms, MID - Schneider Electric

In cart

494,67 €

SPECIFICATIONS

Main

Device short name PM5111

Measurement current 50…8500 mA

Range PowerLogic

Product Name PowerLogic PM5000

Measurement voltage 35…760 V AC 45...65 Hz between phases
20…440 V AC 45...65 Hz between phase and neutral

Complementary

power quality analysis up to the 15th harmonic

[in] rated current 5 A
1 A

maximum power consumption in va 10 VA at 415 V

Product certifications CE conforming to IEC 61010-1
CULus conforming to UL 61010-1
MID conforming to EN 50470-1
MID conforming to EN 50470-3

Communication port support RS485

Handle front plate colour 96 mm

Product or component type Power meter

accuracy class Class 0.5S active energy conforming to IEC 62053-22

Connections - terminals Voltage circuit: screw terminal block4
Control circuit: screw terminal block2
Current transformer: screw terminal block6
Input/output circuit: screw terminal block6
RS485 link: screw terminal block4

Device application Power monitoring

type of measurement Current
Voltage
Frequency
Power factor
Energy
Active and reactive power

Analogue input type Voltage (impedance 5 MOhm)
Current (impedance <= 0.3 mOhm)

Data recording Time stamping
Min/max of instantaneous values

width (w) 96 mm

network frequency 50 Hz
60 Hz

number of outputs 1 digital

Mounting mode Flush-mounted

Net weight 380 g

frequency measurement range 45…65 Hz

measurement accuracy Active energy +/- 0.5 %
Reactive energy +/- 2 %
Active power +/- 0.5 %
Apparent power +/- 0.5 %
Frequency +/- 0.05 %
Power factor +/- 0.5
Current +/- 0.5 %
Voltage +/- 0.5 %
Apparent energy +/- 0.5 %
Reactive power +/- 2 %

communication port protocol Modbus RTU and ASCII at 9.6, 19.2 and 38.4 kbauds even/odd or none - 2 wires, insulation 2500 V
JBUS

Display type Monochrome graphic LCD

Mounting support Framework

depth 72 mm

Network type 3P
1P + N
3P + N

Pollution degree 2

sampling rate 64 samples/cycle

display resolution 128 x 128 pixels

supply voltage 90...450 V AC 45...65 Hz
100...300 V DC

Ride-through time 80 ms 120 V AC typical
100 ms 230 V AC typical
100 ms 415 V AC typical

Environment

Ambient air temp for storage/transportation -40…85 °C

ip degree of protection IP54 display: conforming to IEC 60529
IP30 rear: conforming to IEC 60529

operating altitude 2000 m CAT III
3000 m CAT II

ambient air temperature for operation -25…70 °C meter
-20…70 °C display
-25…-20 °C (with reduced performance) display

electromagnetic compatibility Surge immunity test class A conforming to IEC 61000-4-5
Voltage dips and interruptions immunity test level 4 conforming to IEC 61000-4-11
Limits for harmonic current emissions class A conforming to IEC 61000-3-2
Electrostatic discharge level 4 conforming to IEC 61000-4-2
Conducted RF disturbances level 3 conforming to IEC 61000-4-6
Magnetic field at power frequency level 4 conforming to IEC 61000-4-8
Conducted and radiated emissions class B conforming to EN 55022
Immunity to conducted disturbances - test level: 150 kHz...80 MHz conforming to IEC 61000-4-6
Electrical fast transient/burst immunity test conforming to IEC 61000-4-4
Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3
Surge immunity test conforming to IEC 61000-4-5
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Limitation of voltage changes, voltage fluctuations and flicker in low-voltage conforming to IEC 61000-3-3
Conducted RF disturbances conforming to IEC 61000-4-6
Immunity to impulse waves conforming to IEC 61000-4-12

standards IEC 61557-12
EN 50470-1
UL 61010-1
IEC 62053-24
IEC 60529
EN 50470-3
IEC 62053-22

relative humidity 5…95 % at 50 °C non-condensing