All categories
Compare Cart

LC1F800QW - TeSys F contactor 3P (3 NO) AC3 <= 440 V 800 A coil 400 V DC - Schneider Electric

Expected in 2-4 weeks
LC1F800QW - TeSys F contactor 3P (3 NO) AC3 <= 440 V 800 A coil 400 V DC - Schneider Electric - TeSys F contactor 3P (3 NO) AC3 <= 440 V 800 A coil 400 V DC - Schneider Electric - 0
LC1F800QW - TeSys F contactor 3P (3 NO) AC3 <= 440 V 800 A coil 400 V DC - Schneider Electric
3 949,71 € excl. VAT
4 818,65 € incl. VAT
Text About:
TeSys F contactor 3P (3 NO) AC3 <= 440 V 800 A coil 400 V DC - Schneider Electric
4 818,65 €
SPECIFICATIONS
Main
Contactor application Resistive load
Motor control
Device short name LC1F
Range TeSys
[uc] control circuit voltage 400 V DC
380...415 V AC 40...400 Hz
[ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 group C
control circuit type DC standard
AC at 40...400 Hz
motor power kW 450 kW at 1000 V AC 50/60 Hz (AC-3)
450 kW at 500 V AC 50/60 Hz (AC-3)
475 kW at 660...690 V AC 50/60 Hz (AC-3)
110 kW at 400 V AC 50/60 Hz (AC-4)
450 kW at 380...400 V AC 50/60 Hz (AC-3)
450 kW at 415 V AC 50/60 Hz (AC-3)
450 kW at 440 V AC 50/60 Hz (AC-3)
250 kW at 220...230 V AC 50/60 Hz (AC-3)
average impedance 0.12 mOhm - Ith 1000 A 50 Hz
Complementary
[ie] rated operational current 1000 A (at <40 °C) at <= 440 V AC AC-1
800 A (at <55 °C) at <= 440 V AC AC-3
[ue] rated operational voltage <= 1000 V AC 50/60 Hz
<= 460 V DC
compatibility code LC1F
[ics] rated service breaking capacity 6400 A conforming to IEC 60947-4-1
[icw] rated short-time withstand current 5500 A 40 °C - 10 s
4600 A 40 °C - 30 s
3600 A 40 °C - 1 min
2600 A 40 °C - 3 min
1700 A 40 °C - 10 min
[ith] conventional thermal current 1000 A (at 40 °C)
Product certifications UL
CSA
RMRoS
CB
ABS
CCC
UKCA
Handle front plate colour 304 mm
Product or component type Contactor
tightening torque Control circuit: 1.2 N.m
Power circuit: 58 N.m
[uimp] rated impulse withstand voltage 8 kV
Connections - terminals Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end
Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
Power circuit: bar 2 cable(s) - busbar cross section: 60 x 5 mm
Power circuit: bolted connection
Associated fuse rating 1000 A gG at <= 440 V
800 A aM at <= 440 V
Control circuit voltage limits Operational: 0.85...1.1 Uc (at 55 °C)
Drop-out: 0.3...0.5 Uc (at 55 °C)
width (w) 309 mm
Heat dissipation 12 W
Net weight 18.75 kg
Hold-in power consumption in w 12 W at 20 °C
Mounting support Plate
power dissipation per pole 120 W AC-1
77 W AC-3
depth 255 mm
inrush power in w 1900 W (at 20 °C)
mechanical durability 5 Mcycles
Maximum operating rate 600 cyc/h 55 °C
operating time 40...50 ms opening
60...80 ms closing
contactor coil voltage 400 V DC standard
400 V AC standard
380 V AC standard
415 V AC standard
Motor power range 250…500 kW at 200…240 V 3 phases
250…500 kW at 380…440 V 3 phases
110…220 kW at 200…240 V 3 phases
250…500 kW at 480…500 V 3 phases
Power pole contact composition 3 NO
motor starter type Direct on-line contactor
Poles description 3P
Utilisation category AC-3
AC-1
AC-4
Environment
Ambient air temp for storage/transportation -60…80 °C
ip degree of protection IP20 front face with shrouds conforming to IEC 60529
IP20 front face with shrouds conforming to VDE 0106
operating altitude 3000 m without derating
Permissible ambient air temperature around the device -5…55 °C
Range of product TeSys F
ambient air temperature for operation -5…55 °C
overvoltage category III
standards JIS C8201-4-1
IEC 60947-4-1
EN 60947-4-1
IEC 60947-1
EN 60947-1
protective treatment TH
Recently viewed
3 949,71 € excl. VAT
4 818,65 € incl. VAT
Expected in 2-4 weeks