LC1F780P7 - TeSys F contactor 3P (3 NO) AC3 <= 440 V 780 A coil 230 V AC - Schneider Electric

Expected in 2-4 weeks

5 107,13 €

Text About:

TeSys F contactor 3P (3 NO) AC3 <= 440 V 780 A coil 230 V AC - Schneider Electric

In cart

5 107,13 €

SPECIFICATIONS

Main

Contactor application Resistive load
Motor control

Device short name LC1F

Range TeSys

[uc] control circuit voltage 230 V AC 40...400 Hz

[ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 group C

control circuit type AC at 40...400 Hz

motor power kW 450 kW at 1000 V AC 50/60 Hz (AC-3)
400 kW at 380...400 V AC 50/60 Hz (AC-3)
425 kW at 415 V AC 50/60 Hz (AC-3)
425 kW at 440 V AC 50/60 Hz (AC-3)
450 kW at 500 V AC 50/60 Hz (AC-3)
475 kW at 660...690 V AC 50/60 Hz (AC-3)
220 kW at 220...230 V AC 50/60 Hz (AC-3)
110 kW at 400 V AC 50/60 Hz (AC-4)

average impedance 0.1 mOhm - Ith 1600 A 50 Hz

Complementary

[ie] rated operational current 1600 A (at <40 °C) at <= 440 V AC AC-1
780 A (at <55 °C) at <= 440 V AC AC-3

[ue] rated operational voltage <= 1000 V AC 50/60 Hz
<= 460 V DC

compatibility code LC1F

[ics] rated service breaking capacity 6240 A conforming to IEC 60947-4-1

[icw] rated short-time withstand current 3000 A 40 °C - 3 min
6250 A 40 °C - 10 s
5600 A 40 °C - 30 s
4600 A 40 °C - 1 min
2200 A 40 °C - 10 min

[ith] conventional thermal current 1600 A (at 40 °C)

Product certifications CSA
RMRoS
BV
UL
DNV
LROS (Lloyds register of shipping)
CB
RINA
ABS

Handle front plate colour 434 mm

Product or component type Contactor

tightening torque Control circuit: 1.2 N.m
Power circuit: 58 N.m

[uimp] rated impulse withstand voltage 8 kV

Connections - terminals Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end
Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
Power circuit: bar 2 cable(s) - busbar cross section: 100 x 5 mm
Power circuit: bolted connection

Associated fuse rating 1600 A gG at <= 440 V
800 A aM at <= 440 V

Control circuit voltage limits Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C)
Drop-out: 0.2...0.4 Uc 40...400 Hz (at 55 °C)

width (w) 702 mm

Heat dissipation 44 W

Net weight 39.5 kg

Hold-in power consumption in va 50 VA, 40...400 Hz cos phi 0.9 (at 20 °C)

Mounting support Plate

power dissipation per pole 250 W AC-1
60 W AC-3

depth 255 mm

Inrush power in va 2100 VA, 40...400 Hz cos phi 0.9 (at 20 °C)

mechanical durability 5 Mcycles

Maximum operating rate 600 cyc/h 55 °C

operating time 40...80 ms closing
130...230 ms opening

contactor coil voltage 230 V AC standard

Motor power range 250…500 kW at 380…440 V 3 phases
110…220 kW at 200…240 V 3 phases
250…500 kW at 480…500 V 3 phases

Power pole contact composition 3 NO

motor starter type Direct on-line contactor

Poles description 3P

Utilisation category AC-1
AC-4
AC-3

Environment

Ambient air temp for storage/transportation -60…80 °C

ip degree of protection IP20 front face with shrouds conforming to IEC 60529
IP20 front face with shrouds conforming to VDE 0106

operating altitude 3000 m without derating

Permissible ambient air temperature around the device -40…70 °C

Range of product TeSys F

ambient air temperature for operation -5…55 °C

overvoltage category III

standards JIS C8201-4-1
EN 60947-1
IEC 60947-1
IEC 60947-4-1
EN 60947-4-1

protective treatment TH