LC1F330P7 - TeSys F contactor 3P (3 NO) AC3 <= 440 V 330 A coil 230 V AC - Schneider Electric

Expected in 2-4 weeks

772,34 €

Text About:

TeSys F contactor 3P (3 NO) AC3 <= 440 V 330 A coil 230 V AC - Schneider Electric

In cart

772,34 €

SPECIFICATIONS

Main

Contactor application Resistive load
Motor control

Device short name LC1F

Range TeSys

[uc] control circuit voltage 230 V AC 40...400 Hz

[ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 group C

control circuit type AC at 40...400 Hz

motor power kW 160 kW at 380...400 V AC 50/60 Hz (AC-3)
180 kW at 415 V AC 50/60 Hz (AC-3)
200 kW at 440 V AC 50/60 Hz (AC-3)
200 kW at 500 V AC 50/60 Hz (AC-3)
220 kW at 660...690 V AC 50/60 Hz (AC-3)
160 kW at 1000 V AC 50/60 Hz (AC-3)
100 kW at 220...230 V AC 50/60 Hz (AC-3)
59 kW at 400 V AC 50/60 Hz (AC-4)

average impedance 0.28 mOhm - Ith 400 A 50 Hz

Complementary

[ie] rated operational current 400 A (at <40 °C) at <= 440 V AC AC-1
330 A (at <55 °C) at <= 440 V AC AC-3

[ue] rated operational voltage <= 1000 V AC 50/60 Hz
<= 460 V DC

compatibility code LC1F

[ics] rated service breaking capacity 2640 A conforming to IEC 60947-4-1

[icw] rated short-time withstand current 2650 A 40 °C - 10 s
1800 A 40 °C - 30 s
1300 A 40 °C - 1 min
900 A 40 °C - 3 min
750 A 40 °C - 10 min

[ith] conventional thermal current 400 A (at 40 °C)

Product certifications UL
CSA
RINA
BV
RMRoS
ABS
DNV
CB
LROS (Lloyds register of shipping)
UKCA

Handle front plate colour 206 mm

Product or component type Contactor

tightening torque Control circuit: 1.2 N.m
Power circuit: 35 N.m

[uimp] rated impulse withstand voltage 8 kV

Connections - terminals Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end
Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
Power circuit: lugs-ring terminals 1 cable(s) 240 mm²
Power circuit: bar 2 cable(s) - busbar cross section: 30 x 5 mm
Power circuit: bolted connection

Associated fuse rating 400 A aM at <= 440 V
500 A gG at <= 440 V

Control circuit voltage limits Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C)
Drop-out: 0.35...0.55 Uc 40...400 Hz (at 55 °C)

width (w) 213 mm

Heat dissipation 8 W

Net weight 8.6 kg

Hold-in power consumption in va 10 VA, 40...400 Hz cos phi 0.9 (at 20 °C)

Mounting support Plate

power dissipation per pole 44 W AC-1
31 W AC-3

depth 219 mm

Inrush power in va 650 VA, 40...400 Hz cos phi 0.9 (at 20 °C)

mechanical durability 10 Mcycles

Maximum operating rate 2400 cyc/h 55 °C

operating time 40...65 ms closing
100...170 ms opening

contactor coil voltage 230 V AC standard

Motor power range 55…100 kW at 200…240 V 3 phases
110…220 kW at 480…500 V 3 phases
110…220 kW at 380…440 V 3 phases

Power pole contact composition 3 NO

motor starter type Direct on-line contactor

Poles description 3P

Utilisation category AC-3
AC-4
AC-1

Environment

Ambient air temp for storage/transportation -60…80 °C

ip degree of protection IP20 front face with shrouds conforming to IEC 60529
IP20 front face with shrouds conforming to VDE 0106

operating altitude 3000 m without derating

Permissible ambient air temperature around the device -40…70 °C

Range of product TeSys F

ambient air temperature for operation -5…55 °C

overvoltage category III

standards IEC 60947-1
IEC 60947-4-1
JIS C8201-4-1
EN 60947-1
EN 60947-4-1

protective treatment TH