LC1F185M7 - TeSys F contactor 3P (3 NO) AC3 <= 440 V 185 A coil 220 V AC - Schneider Electric

Expected in 2-4 weeks

515,54 € excl. VAT

628,96 € incl. VAT

Text About:

TeSys F contactor 3P (3 NO) AC3 <= 440 V 185 A coil 220 V AC - Schneider Electric

In cart

628,96 €

SPECIFICATIONS

Main

Contactor application Motor control
Resistive load

Device short name LC1F

Range TeSys

[uc] control circuit voltage 220 V AC 40...400 Hz

[ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 group C

control circuit type AC at 40...400 Hz

motor power kW 90 kW at 380...400 V AC 50/60 Hz (AC-3)
100 kW at 415 V AC 50/60 Hz (AC-3)
100 kW at 440 V AC 50/60 Hz (AC-3)
110 kW at 500 V AC 50/60 Hz (AC-3)
110 kW at 660...690 V AC 50/60 Hz (AC-3)
55 kW at 220...230 V AC 50/60 Hz (AC-3)
33 kW at 400 V AC 50/60 Hz (AC-4)

average impedance 0.33 mOhm - Ith 275 A 50 Hz

Complementary

[ie] rated operational current 275 A (at <40 °C) at <= 440 V AC-1
185 A (at <55 °C) at <= 440 V AC-3

[ue] rated operational voltage <= 460 V DC
<= 690 V AC 50/60 Hz

compatibility code LC1F

[ics] rated service breaking capacity 1480 A conforming to IEC 60947-4-1

[icw] rated short-time withstand current 1500 A 40 °C - 10 s
920 A 40 °C - 30 s
740 A 40 °C - 1 min
500 A 40 °C - 3 min
400 A 40 °C - 10 min

[ith] conventional thermal current 275 A (at 40 °C)

Product certifications LROS (Lloyds register of shipping)
RMRoS
UL
BV
RINA
CSA
DNV
ABS
CB
UKCA

Handle front plate colour 174 mm

Product or component type Contactor

tightening torque Control circuit: 1.2 N.m
Power circuit: 18 N.m

[uimp] rated impulse withstand voltage 8 kV

Connections - terminals Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end
Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
Power circuit: bar 2 cable(s) - busbar cross section: 25 x 3 mm
Power circuit: lugs-ring terminals 1 cable(s) 150 mm²
Power circuit: connector 1 cable(s) 150 mm²
Power circuit: bolted connection

Associated fuse rating 200 A aM at <= 440 V
315 A gG at <= 440 V

Control circuit voltage limits Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C)
Drop-out: 0.2...0.55 Uc 40...400 Hz (at 55 °C)

width (w) 168.5 mm

Heat dissipation 8…9.8 W

Net weight 4.65 kg

Hold-in power consumption in va 9.9 VA, 40...400 Hz cos phi 0.9 (at 20 °C)

Mounting support Plate

power dissipation per pole 12 W AC-3
25 W AC-1

depth 181 mm

Inrush power in va 1070 VA, 40...400 Hz cos phi 0.9 (at 20 °C)

mechanical durability 10 Mcycles

Maximum operating rate 2400 cyc/h 55 °C

operating time 35 ms closing (at Uc)
130 ms opening (at Uc)

contactor coil voltage 220 V AC standard

Motor power range 30…50 kW at 200…240 V 3 phases
55…100 kW at 200…240 V 3 phases
55…100 kW at 380…440 V 3 phases
55…100 kW at 480…500 V 3 phases
110…220 kW at 480…500 V 3 phases

Power pole contact composition 3 NO

motor starter type Direct on-line contactor

Poles description 3P

Utilisation category AC-3
AC-4
AC-1

Environment

Ambient air temp for storage/transportation -60…80 °C

ip degree of protection IP2X front face with shrouds conforming to IEC 60529
IP2X front face with shrouds conforming to VDE 0106

operating altitude 3000 m without derating

Permissible ambient air temperature around the device -40…70 °C

Range of product TeSys F

ambient air temperature for operation -5…55 °C

overvoltage category III

standards IEC 60947-4-1
JIS C8201-4-1
EN 60947-4-1
IEC 60947-1
EN 60947-1

protective treatment TH