HMISCU8B5 - 5?ќ7 color touch controller panel Dig 8 inputs/8 outputs +Ana 4 In/2 Out - Schneider Electric
5 mA for digital
1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode)
+/- 5 % of full scale cyclic ratio 10...90% for fast output (PWM or PTO mode)
+/- 10 % of full scale cyclic ratio 20...80% for fast output (PWM or PTO mode)
+/- 15 % of full scale cyclic ratio 30...70% for fast output (PWM or PTO mode)
cULus CSA 22-2 No 142
GOST
cUL 1604 Class 1 Division 2
C-Tick
KCC
UKCA
UKEX
-10...+10 V or 0...10 V - resolution: 12 bits + sign, input impedance: >= 1 MOhm
-10...10 V/0...10 V (> 2 kOhm) for short-circuit
2 for RTDs
0.004...0.04 ms bounce filter (latch/event and cumulative filter by step Nx0.5ms (64>=N>=2))
3...12 ms integrator (none/run/stop)
RTD at - 50...200 °C - resolution: 16 bits temperature probe: Ni 100/Ni 1000
RTD at - 200...760 °C - resolution: 16 bits (thermocouple J)
RTD at - 240...1370 °C - resolution: 16 bits (thermocouple K)
RTD at 0...1600 °C - resolution: 16 bits (thermocouple R)
RTD at 200...1800 °C - resolution: 16 bits (thermocouple B)
RTD at 0...1600 °C - resolution: 16 bits (thermocouple S)
RTD at - 200...400 °C - resolution: 16 bits (thermocouple T)
RTD at - 200...900 °C - resolution: 16 bits (thermocouple E)
RTD at - 200...1300 °C - resolution: 16 bits (thermocouple N)
2 A 4 A), response time 2 ms with closing contact for digital output
300 mA, response time 2 ms for fast output (normal mode)
50 mA, response time 2 ms for fast output (PWM or PTO mode)
60° right
40° top
60° bottom
6 for digital input conforming to IEC 61131-2 Type 1
Internal data storage FRAM, 128 kB
Application run DRAM, 128 MB
Shielded cable: <100 m for digital input
Unshielded cable: <50 m for digital input
24 V DC (voltage limit: 5...30 V) with relay discrete output(s)
220 V AC (voltage limit: 100...250 V) with relay discrete output(s)
6 digital output, output logic: source
2.81 kOhm
1 Ethernet TCP/IP - RJ45
1 USB 2.0 type mini B
1 USB 2.0 type A
CANopen master bus - SUB-D 9
Japanese (ANK, Kanji)
ASCII
Korean
Taiwanese (traditional Chinese)
100 kHz for fast input - control type single phase
100 kHz for fast input - control type pulse/direction
Modbus TCP/IP
CANopen
1 kHz for fast output (PWM mode)
15…28.8 V DC >= 15 V, current (state 1): >= 2.5 mA <= 5 V, current (state 0): <= 1 mA
2 for fast output, terminal(s): FQ0...FQ1
6 for digital input, terminal(s): DI0...DI5
6 for digital output, terminal(s): DQ0...DQ5
294 m/s² for 6 ms (on panel mounting) conforming to IEC 60068-2-27
1 for digital input
IP65 (front panel) conforming to IEC 60529
Electrostatic discharge immunity test - test level: 6 kV (contact discharge) conforming to IEC 61000-4-2
Susceptibility to electromagnetic fields - test level: 10 V/m (80 MHz...3 GHz) conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test - test level: 2 kV (power lines) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (between analogue I/O and operating voltage) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 2 kV (relay wires) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (Ethernet line) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (COM line) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (CAN line) conforming to IEC 61000-4-4
Surge immunity test - test level: 2 kV (power supply (common mode)) conforming to IEC 61000-4-5
Surge immunity test - test level: 1 kV (power supply (differential mode)) conforming to IEC 61000-4-5
Surge immunity test - test level: 1 kV common mode (digital I/O) conforming to IEC 61000-4-5
Surge immunity test - test level: 0.5 kV differential mode (digital I/O) conforming to IEC 61000-4-5
Conducted RF disturbances - test level: 10 V (0.15...80 MHz) conforming to IEC 61000-4-6
Conducted emission - test level: 150 kHz...30 MHz conforming to EN 55011
Radiated emission - test level: 30 MHz...1 GHz conforming to EN 55011
EN 61131-2
UL 508
IEC 61000-6-2
CSA C22.2 No 213 Class I Division 2
ANSI/ISA 12-12-01
1 gn (f = 9…150 Hz) conforming to IEC 60068-2-6
> 10 MOhm between power supply and earth
The HMISCU8B5 - 5?ќ7 color touch controller panel Dig 8 inputs/8 outputs +Ana 4 In/2 Out is designed to respond to the expectations of industry experts, such as switchgear manufacturers, electrical fitters, maintenance service providers, and OEMs. HMISCU8B5 delivers superior performance and advantages for contractors in the automation and control industry. This 5?ќ7 color touch controller panel Dig 8 inputs/8 outputs +Ana 4 In/2 Out and other Harmony STO & STU from Schneider Electric can be acquired at the most economical price and fulfillment period through baltelec.eu, a well-regarded dealer catering to industry experts in their gathering needs.
Consumers who have procured Schneider Electric Harmony STO & STU have habitually approved the manufacturer’s soundness. It has been remarked that the extraordinary effectiveness of HMISCU8B5 - 5?ќ7 color touch controller panel Dig 8 inputs/8 outputs +Ana 4 In/2 Out extends to a broad spectrum of purposes. Its supreme characteristics make it perfect choice to suit a variety of needs, promoting success in your industrial, tertiary, and automation efforts.
BALTELEC dedicates in serving industrial and tertiary professionals’ needs. We appreciate the customized criteria and standards of our consumers in the niche. By cooperating with us, our customers acquire access to the top rates and inventory of superior products like HMISCU8B5 - 5?ќ7 color touch controller panel Dig 8 inputs/8 outputs +Ana 4 In/2 Out from Schneider Electric at an economical price. Registered customers benefit from additional savings and preferred assistance.
Take action and buy HMISCU8B5 - 5?ќ7 color touch controller panel Dig 8 inputs/8 outputs +Ana 4 In/2 Out at our verified and easy-to-use platform. Don't delay in making this thoughtful action that warrants the greatest quality and adheres to the personalized requirements of buyers like your company.
If there are any problems or concerns about HMISCU8B5 - 5?ќ7 color touch controller panel Dig 8 inputs/8 outputs +Ana 4 In/2 Out or any other Schneider Electric products, contact us or refer to our Information center section below. We have consolidated answers to typical problems to advise you further in making an well-considered decision about industrial and tertiary electrical components.
Remember, HMISCU8B5 - 5?ќ7 color touch controller panel Dig 8 inputs/8 outputs +Ana 4 In/2 Out from Schneider Electric is consistent, reasonable, and outstanding to opposing companies in the Harmony STO & STU category. Make it a part of your solution at once. Buy at BaltElec, your reliable source for all your Harmony STO & STU.
In our Baltelec.eu e-commerce store you will spot 5?ќ7 color touch controller panel Dig 8 inputs/8 outputs +Ana 4 In/2 Out - HMISCU8B5 worth 802.75 €, which will be a trustworthy and innovative solution for your desires. This article is formulated by the Schneider Electric brand using the advanced technologies and fulfills the optimal standards of precaution and efficiency. We deliver articles from the Harmony STO & STU category that associate endurance and usefulness, which is an premium choice for various operations. In defiance of whether you require appliances for small manufacturing or for skilled industrial employment, 5?ќ7 color touch controller panel Dig 8 inputs/8 outputs +Ana 4 In/2 Out will be a trustworthy helper in your assignment.
Baltelec attempts to make the buying process as effortless and fast as attainable for our consumers. We offer detailed portrayals and high-quality pictures of 5?ќ7 color touch controller panel Dig 8 inputs/8 outputs +Ana 4 In/2 Out so that you can make an enlightened choice. A team of adepts is always ready to help you with any queries in the Harmony STO & STU section relevant to the electing and use of goods. We are assured that 5?ќ7 color touch controller panel Dig 8 inputs/8 outputs +Ana 4 In/2 Out will meet your prospects and become an key element of your machinery for just 802.75 €.
Frequently Raised Questions about Schneider Electric HMISCU8B5:
-
Why should I buy Schneider Electric 5?ќ7 color touch controller panel Dig 8 inputs/8 outputs +Ana 4 In/2 Out from BALTELEC?
When your purchase HMISCU8B5 from BaltElec, you will get authentic high-quality Schneider Electric Harmony STO & STU products at the most favorable cost and delivery schedule. Moreover, registered accountsget additional savings and preferred assistance.
-
Can BaltElec advise if HMISCU8B5 - 5?ќ7 color touch controller panel Dig 8 inputs/8 outputs +Ana 4 In/2 Out is appropriate for my undertaking?
To verify that HMISCU8B5 matches your technical requirements, we provide comprehensive information concerning product's specifications, technical characteristics, and compatibility. You can find this data on the specific page of the product model. If you need more guidance, our customer support team is available to aid you in reaching an educated choice.
-
What warranty coverage is offered for Schneider Electric HMISCU8B5?
BALTELEC emphasizes the excellence of the items we offer. The default warranty coverage for Schneider Electric Harmony STO & STU including HMISCU8B5 - 5?ќ7 color touch controller panel Dig 8 inputs/8 outputs +Ana 4 In/2 Out is 12 months. Nevertheless, it varies based on the individual product, product category, and may even be extended. You can find detailed guarantee information on the HMISCU8B5 - 5?ќ7 color touch controller panel Dig 8 inputs/8 outputs +Ana 4 In/2 Out product page or by contacting our customer support representatives.
-
Do you offer global shipping for Schneider Electric 5?ќ7 color touch controller panel Dig 8 inputs/8 outputs +Ana 4 In/2 Out and other Schneider Electric products?
Yes. Besides catering to Estonia, Latvia, Lithuania and other European Union countries, we offer international shipping for Schneider Electric HMISCU8B5. However that delivery options, fees, and delivery schedule can vary based on the destination. For complex requests, feel free to reach out to BaltElec sales team.
-
Do Schneider Electric MBC provided by BALTELEC adhere to international norms for safety and reliability?
Of course. All Schneider Electric products available at BALTELEC online store adhere to global norms such as IEC 60898-1 and carry the CE mark. These standards guarantee that the products fulfill rigorous safety, technical, dependability, and functional requirements.
-
Can BALTELEC offer support on incorporating renewable energy solutions, such as solar energy systems or wind power converters, into my projects?
Definitely! Baltelec website acknowledges the importance of clean energy integration within projects. Our group of experts can help you in choosing the appropriate Schneider Electric products, to integrate them into your renewable energy solutions}. We can offer recommendations on combining solar energy systems, wind power converters, and alternative sustainable options to optimize power generation and efficiency.
-
Do you have green options available within the Harmony STO & STU category to support green energy initiatives?
Absolutely! Baltelec website offers a wide range of green solutions within the Harmony STO & STU category that are in line with green energy initiatives. Our top-quality Schneider Electric products, including the HMISCU8B5, are engineered with energy efficiency in mind. By incorporating these products into your electrical system, you can optimize energy usage and reduce environmental impact. Additionally, we present competitive pricing for our energy-efficient Schneider Electric products,, making them an economical choice for advocating sustainability.
-
Are HMISCU8B5 sold by BALTELEC genuine?
Indeed, we exclusively offer genuine Schneider Electric products, including but not limited to 5?ќ7 color touch controller panel Dig 8 inputs/8 outputs +Ana 4 In/2 Out. We procure our products only through legitimate distribution channels to ensure their legitimacy and superior standards.
