GC2504M6 - TeSys GC modular contactor 25 A 4 NC coil 220...240 V AC - Schneider Electric

Expected in 2-4 weeks

87,48 €

Text About:

TeSys GC modular contactor 25 A 4 NC coil 220...240 V AC - Schneider Electric

In cart

87,48 €

SPECIFICATIONS

Main

Contactor application Heating
Motor control
Lighting

Device short name GC25

Range TeSys

[uc] control circuit voltage 220...240 V AC 60 Hz

Product Name TeSys GC

[ui] rated insulation voltage 500 V conforming to IEC 61095
500 V conforming to VDE 0110

control circuit type AC at 60 Hz

average impedance 2.5 mOhm - Ith 25 A 50 Hz for power circuit

Complementary

[ie] rated operational current 25 A AC-7A
8.5 A AC-7B

[ue] rated operational voltage <= 250 V AC

[ics] rated service breaking capacity 68 A at 400 V for power circuit conforming to IEC 61095

[icw] rated short-time withstand current 200 A 40 °C - 10 s for power circuit
62 A 40 °C - 30 s for power circuit

[ith] conventional thermal current 25 A (at 50 °C) for power circuit

Control type Remote control

Handle front plate colour 85 mm

Product or component type Modular contactor

tightening torque Control circuit: 0.8 N.m - on screw clamp terminals
Power circuit: 0.8 N.m - on screw clamp terminals

[uimp] rated impulse withstand voltage 4 kV

Connections - terminals Control circuit: screw clamp terminals 1 cable(s) 2.5 mm²flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 2.5 mm²flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 2.5 mm²flexible with cable end
Control circuit: screw clamp terminals 2 cable(s) 1.5 mm²flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 1.5 mm²solid without cable end
Control circuit: screw clamp terminals 2 cable(s) 1.5 mm²solid without cable end
Power circuit: screw clamp terminals 1 cable(s) 6 mm²flexible without cable end
Power circuit: screw clamp terminals 2 cable(s) 4 mm²flexible without cable end
Power circuit: screw clamp terminals 1 cable(s) 6 mm²flexible with cable end
Power circuit: screw clamp terminals 2 cable(s) 1.5 mm²flexible with cable end
Power circuit: screw clamp terminals 1 cable(s) 6 mm²solid without cable end
Power circuit: screw clamp terminals 2 cable(s) 4 mm²solid without cable end

Associated fuse rating 25 A gL at <= 440 V for power circuit

Quantity per set Set of 6

Control circuit voltage limits Drop-out: 0.2...0.75 Uc at 50 Hz (at <50 °C)
Operational: 0.85...1.1 Uc at 50 Hz (at <50 °C)

width (w) 36 mm

mechanical robustness Shocks contactor open: 10 Gn for 11 ms
Shocks contactor closed: 15 Gn for 11 ms
Vibrations contactor open: 2 Gn, 5...300 Hz
Vibrations contactor closed: 3 Gn, 5...300 Hz

Colour White

Mounting mode Clip-on

Heat dissipation 1.6 W at 50/60 Hz

Net weight 0.23 kg

Hold-in power consumption in va 4.6 VA 50 Hz (at 20 °C)

Operating position 30°/vertical

Mounting support DIN rail

power dissipation per pole 1.6 W

depth 62.5 mm

Inrush power in va 34 VA 50 Hz (at 20 °C)

mechanical durability 1000000 cycles

electrical durability AC-7A: 100000 cycles
AC-7B: 100000 cycles

Irms rated making capacity 68 A at 400 V AC for power circuit conforming to IEC 61095

Maximum operating rate 300 cyc/h 50 °C

operating time 10...25 ms opening
10...30 ms closing

Power pole contact composition 4 NC

Poles description 4P

Utilisation category AC-7A
AC-7B

Total number of 18 mm modules 2

Environment

Ambient air temp for storage/transportation -40…70 °C

ip degree of protection IP40 conforming to VDE 0106 (in enclosure)
IP20 conforming to VDE 0106

operating altitude <= 3000 m

ambient air temperature for operation -5…50 °C

standards IEC 61095
IEC 60947-5

protective treatment TC