LC3F225M7 - TeSys F star delta starter 3 x 3P (3 NO) 225 A 220/230 V AC coil - Schneider Electric

Upon request only

Text About:

TeSys F star delta starter 3 x 3P (3 NO) 225 A 220/230 V AC coil - Schneider Electric

SPECIFICATIONS

Main

Contactor application Motor control

Device short name LC3F

Interlocking type Without start delta mechanical interlock

Range TeSys

[uc] control circuit voltage 220/230 V AC 50/60 Hz

Product Name TeSys F

[ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 group C

control circuit type AC at 50/60 Hz

motor power kW 100 kW at 220/230 V AC 50/60 Hz
200 kW at 380/400 V AC 50/60 Hz
200 kW at 415 V AC 50/60 Hz
220 kW at 440 V AC 50/60 Hz

Complementary

[ie] rated operational current 225 A (at <55 °C) at <= 440 V AC AC-3 for power circuit

[ue] rated operational voltage Power circuit: <= 1000 V AC 16 Hz 2/3...200 Hz

[ics] rated service breaking capacity 1800 A conforming to IEC 60947-4-1

[icw] rated short-time withstand current 1800 A 40 °C - 10 s
1000 A 40 °C - 30 s
850 A 40 °C - 1 min
560 A 40 °C - 3 min
440 A 40 °C - 10 min

[ith] conventional thermal current 315 A 40 °C

Product certifications CB
CCC
RMRoS
DNV
ABS
LROS (Lloyds register of shipping)
UL
RINA
CSA

Handle front plate colour 110 mm

Product or component type Star delta starter

tightening torque Control circuit: 1.2 N.m
Power circuit: 35 N.m

[uimp] rated impulse withstand voltage 8 kV

Auxiliary contact composition 1 NC for KM1 star contactor
1 NO for KM1 star contactor
2 NC for KM2 line contactor
1 NO for KM2 line contactor
1 NC for KM3 delta contactor
2 NO for KM3 delta contactor

Connections - terminals Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: flexible with cable end
Control circuit: screw clamp terminals 2 1…2.5 mm² - cable stiffness: flexible with cable end
Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: flexible without cable end
Control circuit: screw clamp terminals 2 1…4 mm² - cable stiffness: flexible without cable end
Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: solid without cable end
Control circuit: screw clamp terminals 2 1…4 mm² - cable stiffness: solid without cable end
Power circuit: bar 2 - busbar cross section: 32 x 4 mm
Power circuit: bolted connection
Power circuit: lugs-ring terminals 1 185 mm²
Power circuit: connector 1 185 mm²

Associated fuse rating 315 A gG at <= 440 V
250 A aM at <= 440 V

Control circuit voltage limits Operational: 0.85...1.1 Uc at 50/60 Hz (at <55 °C)
Drop-out: 0.35...0.55 Uc at 50/60 Hz (at <55 °C)

width (w) 525 mm

mechanical robustness Vibrations contactor open: 2 Gn, 5...300 Hz
Shocks contactor closed: 15 Gn for 11 ms
Vibrations contactor closed: 5 Gn, 5...300 Hz
Shocks contactor open: 7 Gn for 11 ms

Connections bolt diameter M10

Heat dissipation 18…24 W

Net weight 16.5 kg

Hold-in power consumption in va 55 VA 50 Hz cos phi 0.3 (at 20 °C)
66 VA 60 Hz cos phi 0.3 (at 20 °C)

Mounting support Plate

depth 235 mm

Inrush power in va 805 VA 50 Hz cos phi 0.3 (at 20 °C)
970 VA 60 Hz cos phi 0.3 (at 20 °C)

mechanical durability 10 Mcycles

Device presentation Pre-wired

Irms rated making capacity 2250 A conforming to IEC 60947-4-1

Maximum operating rate 2400 cyc/h 55 °C

operating time 20...35 ms closing
7...15 ms opening

Power pole contact composition 3 x 3 NO

Starting time 20 s

Poles description 3 x 3P

Utilisation category AC-3

Environment

Ambient air temp for storage/transportation -60…80 °C

ip degree of protection IP20 front face with shrouds conforming to IEC 60529
IP20 front face with shrouds conforming to VDE 0106

operating altitude 3000 m without derating

ambient air temperature for operation -5…55 °C
-40…70 °C at Uc

standards JIS C8201-4-1
EN 60947-1
IEC 60947-1
EN 60947-4-1
IEC 60947-4-1

protective treatment TH

Q&A and product info

Contact Us

Professional sales of electrical equipment in Estonia, Latvia, Lithuania, and Finland. Certified low-voltage components, circuit breakers, contactors, and industrial automation solutions. Same-day quotations and fast delivery across the Baltics and Finland.

+372 5326 4976

Mon–Fri 9:00–17:00

info@baltelec.eu

Response within 2 hours

Schneider Electric LC3F225M7 is a professional TeSyS F solution designed for companies. BaltElec specializes in volume-based sales and supply in Estonia, Latvia, Lithuania, and Finland.

Original Schneider Electric product, certificates and compliance documents available.
Volume-based pricing – request a quote for larger quantities (MOQ may apply).
Efficient logistics across the Baltics and Finland; cooperation with trusted couriers.
Technical support and application suitability advice based on your requirements.

Pricing: Request a special offer. The price depends on quantity, delivery, and payment terms.

TeSyS F specifications may vary by model. For an exact match, please send us your requirements or check the technical data sheet.

FAQ for LC3F225M7 - Schneider Electric

Does your company provide bulk pricing for LC3F225M7?

Yes, volume-based pricing are available. Send us a list of required quantities (e.g. LC3F225M7, Schneider Electric, 10 pcs) and we’ll prepare a personalized quotation.
What is the availability and lead time for LC3F225M7 in the Baltics and Finland?

We provide reliable logistics for deliveries to Estonia, Latvia, Lithuania, and Finland. Exact lead time depends on configuration and stock level, confirmed upon quotation.
Is LC3F225M7 by Schneider Electric an authentic product?

Yes. We only sell Schneider Electric authentic products with manufacturer’s warranty. Compliance certificates are available on request.
Is LC3F225M7 suitable for my TeSyS F project?

We help confirm compatibility efficiently. Please provide conditions (voltage, current, environment, standards), and we’ll compare them to Schneider Electric technical requirements.
How does delivery and invoicing work?

We deliver via logistics partner to Estonia, Latvia, Lithuania, and Finland. Invoicing is done according to quotation; bulk purchases are priced individually.