Main
Discrete output logic
Positive
product specific application
For severe environments
reverse polarity protection
Reverse mounted diode
Complementary
maximum leakage current
0.1 mA at state 0
mtbf reliability
290000 H
Product or component type
Discrete output module
maximum voltage drop
<1.5 V at state 1
current per channel
0.125 A
Discrete output current
0.1 A
output short-circuit protection
With 2 A external fuse
Load impedance ohmic
>= 220 Ohm
switching frequency
0.5/LI² Hz
Maximum current per module
3.2 A
Net weight
0.11 kg
Discrete output type
Solid state
Discrete output voltage
24 V 19...30 V DC
Discrete output number
32 conforming to EN/IEC 61131-2
power dissipation in w
3.6 W
Output overload protection
With current limiter
With electronic circuit breaker 0.125 A < Id < 0.185 A
Paralleling of outputs
Yes : 3 maximum
Maximum overload time
15 ms
Maximum tungsten load
1.2 W
voltage detection threshold
< 14 V DC preactuator fault
> 18 V DC preactuator at state 0
dielectric strength
1500 V AC at 50/60 Hz 1 minute, output/ground
1500 V AC at 50/60 Hz 1 minute, output/internal logic
500 V DC 1 minute, between group of channels
Output overvoltage protection
With transil diode
Shock resistance
30 gn
Response time on output
1.2 ms
Status led
1 LED (green) module operating (RUN)
1 LED per channel (green) channel diagnostic
1 LED (red) module error (ERR)
1 LED (red) module I/O
Protection type
reverse polarity protection
External short-circuit protection
overload protection
overvoltage protection
Typical current consumption
125 mA at 3.3 V DC
Environment
Ambient air temp for storage/transportation
-40…85 °C
Directives
2014/35/EU - low voltage directive
2014/30/EU - electromagnetic compatibility
ip degree of protection
IP20
operating altitude
0...2000 m
2000...5000 m with derating factor
Range of product
Modicon X80
ambient air temperature for operation
0…60 °C
Environmental characteristics
Gas resistant class Gx
Gas resistant class 3C4
Dust resistant class 3S4
Sand resistant class 3S4
Salt resistant level 2
Mold growth resistant class 3B2
Fungal spore resistant class 3B2
relative humidity
5…95 % at 0…60 °C without condensation
vibration resistance
3 gn
protective treatment
Conformal coating
insulation resistance
> 10 MOhm 500 V DC