BMXDDM3202K - Discrete mixed I/O module, Modicon X80, 16 inputs, 16 outputs, 24V DC positive - Schneider Electric

Expected in 2-4 weeks

462,88 € excl. VAT

564,72 € incl. VAT

Text About:

Discrete mixed I/O module, Modicon X80, 16 inputs, 16 outputs, 24V DC positive - Schneider Electric

In cart

564,72 €

SPECIFICATIONS

Main

Discrete input current 2.5 mA

reverse polarity protection Reverse mounted diode

Complementary

maximum leakage current 0.1 mA at state 0

mtbf reliability 430000 H

Product or component type Discrete I/O module

Current consumption <= 104 mA at 24 V DC
<= 166 mA at 3.3 V DC

Dc maximum response time 7 ms

maximum voltage drop <1.5 V at state 1

current state 0 guaranteed <= 0.5 mA

Dc typical response time 4 ms

current per channel 0.125 A

current state 1 guaranteed >= 2 mA

Discrete output current 0.1 A

output short-circuit protection With 2 A external fuse

Load impedance ohmic <= 220 Ohm

switching frequency 0.5/LI² Hz

Discrete input voltage 24 V DC, discrete input logic: positive

input type Current sink (logic positive)

Maximum current per module 3.2 A

Discrete input number 16

Net weight 0.11 kg

Discrete output type Solid state

Discrete output voltage 24 V 19...30 V DC

Discrete output number 16

input impedance 9600 Ohm

power dissipation in w 4 W

Output overload protection With electronic circuit breaker 0.125 A < Id < 0.185 A
With current limiter

Paralleling of outputs Yes : 3 maximum

Maximum overload time 15 ms

Maximum tungsten load 1.2 W

voltage detection threshold < 14 V DC preactuator fault
< 14 V DC sensor fault
> 18 V DC preactuator OK
> 18 V DC sensor OK

dielectric strength 1500 V AC at 50/60 Hz 1 minute, output/ground
1500 V AC at 50/60 Hz 1 minute, output/internal logic
1500 V AC at 50/60 Hz 1 minute, primary/secondary
500 V DC 1 minute, between group of inputs and outputs

Sensor power supply 19...30 V

Input compatibility With 2-wire/3-wire proximity sensors conforming to IEC 60947-5-2
With 2-wire/3-wire proximity sensors conforming to IEC 61131-2 Type 1

Output overvoltage protection With transil diode

Shock resistance 30 gn

Response time on output 1.2 ms

Status led 1 LED (green) module operating (RUN)
1 LED per channel (green) channel diagnostic
1 LED (red) module error (ERR)
1 LED (red) module I/O

Protection type 1 external fuse per group of input channel0.5 A fast blow
overvoltage protection on output
reverse polarity protection on input
reverse polarity protection on output

Typical current consumption 69 mA at 24 V DC
125 mA at 3.3 V DC

Environment

Ambient air temp for storage/transportation -40…85 °C

Directives 2014/35/EU - low voltage directive
2014/30/EU - electromagnetic compatibility

ip degree of protection IP20

operating altitude 0...2000 m
2000...5000 m with derating factor

Range of product Modicon X80

ambient air temperature for operation 0…60 °C

relative humidity 5…95 % at 55 °C without condensation

vibration resistance 3 gn

insulation resistance > 10 MOhm 500 V DC