BMEAHI0812H - Analog isolated high level input module, Modicon X80, 8 HART inputs, 4 to 20mA, for severe environments - Schneider Electric

Expected in 2-4 weeks

1 209,98 €

Text About:

Analog isolated high level input module, Modicon X80, 8 HART inputs, 4 to 20mA, for severe environments - Schneider Electric

In cart

1 209,98 €

SPECIFICATIONS

Main

Analogue input resolution 15 bits + sign

Complementary

product compatibility BMEP58... processor
BMXFTB20... terminal block
ABE7CPA31
ABE7CPA02
ABE7CPA03
Head module BMECRA31210
BMEXBP... backplane

Product certifications CE
UL
CSA
RCM
EAC
Merchant Navy
ATEX zone 2/22
IECEx zone 2/22

Product or component type Analog input module

application specific I/O HART

Analogue input number 8

Analogue input type Current 4...20 mA

function available I/O mapping

temperature drift 50 ppm/°C

Net weight 0.233 kg

Topology Point-to-point

measurement error 0.15 % of full scale 25 °C
0.55 % of full scale - 25...70 °C

Isolation between channels Isolated

input impedance 250 Ohm internally protective resistor (3.6 to 50 Ohm)

electrical connection 20 ways terminal block
Telefast

Isolation voltage 1000 V DC for 60 s between channels
1400 V DC for 60 s between channels and ground
1400 V DC for 60 s between channels and bus

checks Broken wire detection

Environment

Ambient air temp for storage/transportation -40…85 °C

Directives 2014/35/EU - low voltage directive
2014/30/EU - electromagnetic compatibility
2014/34/EU - ATEX directive

operating altitude 0...2000 m
2000...5000 m with derating factor

Range of product Modicon X80

ambient air temperature for operation -25…70 °C

Environmental characteristics Gas resistant class Gx conforming to ISA S71.04
Gas resistant class 3C4 conforming to IEC 60721-3-3
Dust resistant class 3S4 conforming to IEC 60721-3-3
Sand resistant class 3S4 conforming to IEC 60721-3-3
Salt resistant level 2 conforming to IEC 68252
Mold growth resistant class 3B2 conforming to IEC 60721-3-3
Fungal spore resistant class 3B2 conforming to IEC 60721-3-3
Hazardous location class I division 2

standards EN/IEC 61131-2
EN/IEC 61010-2-201
UL 61010-2-201
CSA C22.2 No 61010-2-201
IACS E10
EN/IEC 61000-6-5, interface type 1 and type 2
EN/IEC 61850-3, location G
EN/IEC 60079-0

protective treatment Conformal coating