ATV950D22N4 - Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55 - Schneider Electric
Slot A: communication module for PROFINET
Slot A: communication module for DeviceNet
Slot A: communication module for EtherCAT
Slot A: communication module for CANopen daisy chain RJ45
Slot A: communication module for CANopen SUB-D 9
Slot A: communication module for CANopen screw terminals
Slot A/slot B/slot C: digital and analog I/O extension module
Slot A/slot B/slot C: output relay extension module
Slot B: 5/12 V digital encoder interface module
Slot B: analog encoder interface module
Slot B: resolver encoder interface module
communication module for Ethernet Powerlink
With EMC plate option
18.5 kW for heavy duty
Standard version
+/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output
Relay output R1 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Relay output R2, R3 on resistive load, cos phi = 1: 5 A at 250 V AC
Relay output R2, R3 on resistive load, cos phi = 1: 5 A at 30 V DC
Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
TÜV
CSA
AI1, AI2, AI3 software-configurable current: 0...20 mA/4...20 mA, impedance: 250 Ohm, resolution 12 bits
Constant torque standard
Variable torque standard
Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)
Positive logic (source) (DI7, DI8), < 0.6 V (state 0), > 2.5 V (state 1)
Positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1)
Software-configurable current AQ1, AQ2: 0...20 mA impedance 500 Ohm, resolution 10 bits
DI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm
4...16 kHz with derating factor
Embedded communication status: 5 LED (dual colour)
Communication module status: 2 LED (dual colour)
Presence of voltage: 1 LED (red)
Automatic whatever the load
Can be suppressed
Not available in permanent magnet motor law
2-wire RS 485
Programmable as pulse output DQ+ 0…30 kHz <= 30 V DC 20 mA
Logic output DQ- 0…1 kHz <= 30 V DC 100 mA
EtherNet/IP
Modbus TCP
25.0 hp for heavy duty
1 RJ45
34.1 A at 380 V (heavy duty)
34.4 A at 480 V (normal duty)
29.9 A at 480 V (heavy duty)
39.2 A at 4 kHz for heavy duty
58.8 A during 60 s (heavy duty)
Line side: screw terminal 10...16 mm²/AWG 8...AWG 6
DC bus: screw terminal 10...16 mm²/AWG 8...AWG 6
Motor: screw terminal 16 mm²/AWG 6
AQ1, AQ2: +/- 0.2 % for analog output
DI7, DI8: pulse input level 1 PLC conforming to IEC 65A-68
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
Synchronous motors
Synchronous reluctance motor
24.9 kVA at 480 V (heavy duty)
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
Safe torque off: motor
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive
Configurable relay logic R2: sequence relay NO electrical durability 1000000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 1000000 cycles
4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
5 ms +/- 1 ms (DI7, DI8) - pulse input
1 ms +/- 1 ms (AI1, AI2, AI3) - analog input
5 ms +/- 1 ms (AQ1, AQ2) - analog output
Class 3S3 according to IEC 60721-3-3
1000...4800 m with current derating 1 % per 100 m
40…50 °C (with derating factor)
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Dust pollution resistance class 3S3 conforming to EN/IEC 60721-3-3
EN/IEC 61800-3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1
1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
The ATV950D22N4 - Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55 is designed to address the prerequisites of trade buyers, such as panel builders, cable technicians, management services, and equipment creators. ATV950D22N4 dispenses impressive standards and worth for experts in the electromechanical industry. This Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55 and other Altivar 650 from Schneider Electric can be bought at the lowest cost and fulfillment period through BALTELEC.EU, a credible vendor fulfilling the needs of consultants in their gathering needs.
Clients who have purchased Schneider Electric Altivar 650 have frequently acclaimed the creator's robustness. It has been indicated that the superior competence of ATV950D22N4 - Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55 extends to a spectrum of applications. Its elite components make it suitable for wide-ranging specifications, guaranteeing the success of your industrial, tertiary, and automation contracts.
Our team dedicates in serving industrial and tertiary professionals’ needs. We recognize the customized specifications and standards of our consumers in the realm. By working with our specialists, you gain access to the leading price and inventory of the top-of-the-line products like ATV950D22N4 - Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55 from Schneider Electric at a value-for-money price. Authorized buyers get more savings and top-tier service.
Move quickly and get ATV950D22N4 - Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55 at our protected and intuitive e-commerce site. Don't delay in making this clever move that warrants the paramount quality and meets the unique criteria of vendors like your company.
Should you have any uncertainties or concerns about ATV950D22N4 - Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55 or any other Schneider Electric products, communicate with us or refer to our Common Questions section below. We have gathered answers to common problems to benefit you further in making an considered decision about industrial and tertiary electrical components.
Remember, ATV950D22N4 - Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55 from Schneider Electric is safe, wallet-friendly, and first-rate to market challengers in the Altivar 650 category. Don't hesitate to make it a part of your inventory today. Procure at baltele.eu, your consistent provider for all your Schneider Electric.
In our Baltelec.eu electronic store you will discover Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55 - ATV950D22N4 worth 3,462.11 €, which will be a faithful and cutting-edge solution for your demands. This merchandise is invented by the Schneider Electric brand using the latest technologies and satisfies the optimal standards of well-being and efficacy. We give products from the Altivar 650 category that combine resilience and efficacy, which is an excellent choice for various uses. Despite of whether you want appliances for small output or for expert industrial exertion, Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55 will be a steadfast companion in your occupation.
Baltelec attempts to make the securing process as effortless and fast as achievable for our clients. We offer detailed descriptions and high-quality pictures of Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55 so that you can make an educated choice. A team of masters is always ready to help you with any enquiries in the Altivar 650 section connected to the determining and use of articles. We are confident that Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55 will meet your requirements and become an essential element of your gear for just 3,462.11 €.
Popular Questions about Schneider Electric Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55:
-
What are the advantages of ordering Schneider Electric Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55 from baltelec.eu?
When purchasing Schneider Electric ATV950D22N4 from BALTELEC, you receive original quality Schneider Electric Altivar 650 products at the unbeatable prices and delivery schedule. Moreover, loyal buyersget further discounts and first-class attention.
-
Can Baltelec advise if ATV950D22N4 is the right choice for my needs?
To make sure that Schneider Electric Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55 is suitable for your drawings, we offer detailed details concerning product's specs, technical characteristics, and applicable standards. You can find this information on the product page of the product name. If you seek more guidance, our customer support representative stands ready to help you in making an educated decision.
-
What guarantee coverage is provided for ATV950D22N4 - Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55?
BaltElec emphasizes the quality of the items we offer. The default guarantee coverage for Schneider Electric Altivar 650 including Schneider Electric Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55 is 1 year. However, it is subject according to the individual product, category, and may even be extended. You can discover detailed warranty details on the Schneider Electric ATV950D22N4 dedicated page or by getting in touch with our customer service representatives.
-
Can you provide global shipping for ATV950D22N4 - Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55 as well as other Schneider Electric items?
Certainly. Apart from serving Estonia, Latvia, Lithuania and other European Union countries, we provide global shipping for ATV950D22N4 - Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55. Please keep in mind that shipping options, costs, and delivery schedule can differ based on the destination. In the case of volume requests, please consult Baltelec.eu sales representatives.
-
Do Schneider Electric MBC provided by BaltElec adhere to international standards for security and reliability?
Yes. All Schneider Electric products provided at Baltelec.eu web store adhere to international norms such as IEC 60898-1 and carry the CE certification. Such standards ensure that the products fulfill stringent safety, technological, dependability, and functional requirements.
-
Can Baltelec.eu offer assistance on integrating renewable energy solutions, such as solar energy systems or wind power converters, into my projects?
Yes, sure! Baltelec.eu website recognizes the significance of clean energy incorporation within projects. Our team of experts can support you in selecting the appropriate Schneider Electric items, to integrate them into your renewable energy projects}. We can provide advice on integrating solar power systems, wind energy converters, and other sustainable options to maximize power generation and efficiency.
-
Are there green options offered within the Altivar 650 category to promote green energy initiatives?
Certainly! Baltelec.eu online store offers a wide range of energy-efficient solutions within the Altivar 650 category that are in line with green energy initiatives. Our brand's Schneider Electric products, such as the Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55, are crafted with energy efficiency in mind. By incorporating these products into your electrical system, you can maximize energy usage and lower environmental impact. Additionally, we provide competitive pricing for our eco-friendly Schneider Electric products,, making them an economical choice for supporting sustainability.
-
Are Variable speed drive, Altivar Process ATV900, ATV950, 22 kW, 400/480 V, with braking unit, IP55 sold by Baltelec online store authentic?
Indeed, we solely provide authentic Schneider Electric products, including but not limited to ATV950D22N4. We obtain our products solely through official distribution channels to ensure their authenticity and high performance.
