ATV950D11N4 - Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 - Schneider Electric
Slot A: communication module for PROFINET
Slot A: communication module for DeviceNet
Slot A: communication module for EtherCAT
Slot A: communication module for CANopen daisy chain RJ45
Slot A: communication module for CANopen SUB-D 9
Slot A: communication module for CANopen screw terminals
Slot A/slot B/slot C: digital and analog I/O extension module
Slot A/slot B/slot C: output relay extension module
Slot B: 5/12 V digital encoder interface module
Slot B: analog encoder interface module
Slot B: resolver encoder interface module
communication module for Ethernet Powerlink
With EMC plate option
7.5 kW for heavy duty
With braking chopper
+/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output
Relay output R1 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Relay output R2, R3 on resistive load, cos phi = 1: 5 A at 250 V AC
Relay output R2, R3 on resistive load, cos phi = 1: 5 A at 30 V DC
Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
CSA
UL
AI1, AI2, AI3 software-configurable current: 0...20 mA/4...20 mA, impedance: 250 Ohm, resolution 12 bits
Optimized torque mode
Variable torque standard
Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)
Positive logic (source) (DI7, DI8), < 0.6 V (state 0), > 2.5 V (state 1)
Positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1)
Software-configurable current AQ1, AQ2: 0...20 mA impedance 500 Ohm, resolution 10 bits
DI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm
4...16 kHz with derating factor
Embedded communication status: 5 LED (dual colour)
Communication module status: 2 LED (dual colour)
Presence of voltage: 1 LED (red)
Automatic whatever the load
Adjustable
Not available in permanent magnet motor law
2-wire RS 485
Programmable as pulse output DQ+ 0…30 kHz <= 30 V DC 20 mA
Logic output DQ- 0…1 kHz <= 30 V DC 100 mA
EtherNet/IP
Modbus serial
10.0 hp for heavy duty
1 RJ45
14.1 A at 380 V (heavy duty)
17.0 A at 480 V (normal duty)
12.5 A at 480 V (heavy duty)
16.5 A at 4 kHz for heavy duty
24.8 A during 60 s (heavy duty)
Motor: screw terminal 6...10 mm²/AWG 10...AWG 8
Line side: screw terminal 6 mm²/AWG 10
DC bus: screw terminal 6...10 mm²/AWG 10...AWG 8
AQ1, AQ2: +/- 0.2 % for analog output
DI7, DI8: pulse input level 1 PLC conforming to IEC 65A-68
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
Synchronous motors
Synchronous reluctance motor
10.4 kVA at 480 V (heavy duty)
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
Safe torque off: motor
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive
Configurable relay logic R2: sequence relay NO electrical durability 1000000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 1000000 cycles
4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
5 ms +/- 1 ms (DI7, DI8) - pulse input
1 ms +/- 1 ms (AI1, AI2, AI3) - analog input
5 ms +/- 1 ms (AQ1, AQ2) - analog output
Class 3S3 according to IEC 60721-3-3
1000...4800 m with current derating 1 % per 100 m
40…50 °C (with derating factor)
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Dust pollution resistance class 3S3 conforming to EN/IEC 60721-3-3
EN/IEC 61800-3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1
1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
The ATV950D11N4 - Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 is produced to match the wants of trade buyers, such as electrical contractors, electrical installers, support service firms, and Industry suppliers. ATV950D11N4 dispenses impressive capability and merit for experts in the automation and control industry. This Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 and other Altivar 950 from Schneider Electric are available at the optimal price and supply period through BALTELEC online store, a distinguished dealer helping professionals in their sourcing needs.
Buyers who have bought Schneider Electric Altivar 950 have commonly extolled the producer's trustworthiness. It has been emphasized that the superior operation of ATV950D11N4 - Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 extends to a extensive scope of implementations. Its premium qualities make it well-suited solution to meet diverse demands, ensuring the success of your industrial, tertiary, and automation projects.
Our specialists concentrates in providing for industrial and tertiary professionals’ needs. We grasp the special demands and requirements of our customers in the market. By partnering with BaltElec, you gain access to the best pricing and inventory of the top-of-the-line products like ATV950D11N4 - Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 from Schneider Electric at an economical price. Account holders benefit from added discounts and dedicated support.
Make a move and buy ATV950D11N4 - Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 at our risk-free and convenient online store. Don't delay in making this prudent choice that certifies the paramount quality and adheres to the personalized needs of contractors like your business.
If there are any concerns or concerns about ATV950D11N4 - Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 or any other Schneider Electric products, reach out to us or refer to our Frequently Asked Questions section below. We have brought together answers to routine uncertainties to advise you further in making an knowledgeable decision about industrial and tertiary electrical components.
Remember, ATV950D11N4 - Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 from Schneider Electric is consistent, low-cost, and superior to other vendors in the Altivar 950 category. Feel free to make it a part of your electrical system right now. Purchase at Baltelec e-shop, your reliable source for all your Schneider Electric.
In our Baltelec.eu cyber store you will encounter Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 - ATV950D11N4 worth 2,254.68 €, which will be a sure and state-of-the-art solution for your preferences. This produce is designed by the Schneider Electric brand using the modern technologies and satisfies the top standards of well-being and competence. We offer products from the Altivar 950 category that mix robustness and usefulness, which is an first-rate choice for various uses. Despite of whether you necessitate hardware for small generation or for competent industrial exploitation, Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 will be a dependable associate in your endeavor.
Baltelec labors to make the attaining process as accessible and fast as practicable for our clients. We offer detailed reports and high-quality snapshots of Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 so that you can make an informed choice. A team of specialists is always ready to help you with any queries in the Altivar 950 section connected to the electing and use of products. We are persuaded that Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 will meet your wishes and become an significant element of your tools for just 2,254.68 €.
Common Queries about ATV950D11N4:
-
What are the benefits of purchasing Schneider Electric Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 from baltelec.eu?
When you buy Schneider Electric ATV950D11N4 from baltelec.eu, you obtain genuine quality Schneider Electric Altivar 950 products at competitive prices and lead time. Moreover, our buyerstake pleasure in further discounts and first-class attention.
-
Can you advise if Schneider Electric Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 is the right choice for my contract?
To make sure that Schneider Electric Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 is appropriate for your project, we offer detailed details regarding product's specifications, technical characteristics, and interoperability. You can find this information on the specific page of the product name. If you require additional help, our customer support team stands ready to aid you in reaching an informed decision.
-
Which warranty coverage is provided for Schneider Electric Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55?
BaltElec online store stands for the excellence of the products we distribute. The regular warranty coverage for Schneider Electric Altivar 950 including Schneider Electric Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 is 1 year. However, it varies according to the particular product, category, and might be longer. You can find specific guarantee information on the ATV950D11N4 - Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 dedicated page or by getting in touch with our support team representatives.
-
Can you provide worldwide shipping for Schneider Electric Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 and other Schneider Electric items?
Certainly. Besides catering to Estonia, Latvia, Lithuania and other European Union countries, we provide global shipping for Schneider Electric ATV950D11N4. Please keep in mind that shipping options, fees, and shipping times might vary depending on the destination. In the case of complicated purchases, kindly contact BALTELEC sales representatives.
-
Do Schneider Electric MBC offered by BALTELEC meet global norms for safety and reliability?
Of course. All Schneider Electric items available at Baltelec.eu web store meet international norms such as IEC 60898-1 and carry the CE mark. These standards guarantee that the items fulfill stringent safety, technological, dependability, and functional requirements.
-
Can BALTELEC provide support on integrating renewable energy solutions, such as solar energy systems or wind power converters, into my projects?
Definitely! Baltelec.eu understands the significance of sustainable energy integration within community. Our team of specialists can support you in picking the right Schneider Electric items, to integrate them into your renewable energy projects}. We can provide recommendations on integrating solar energy systems, wind power converters, and additional sustainable options to maximize energy generation and effectiveness.
-
Do you have energy-efficient options available within the Altivar 950 category to support environmental sustainability?
Certainly! BaltElec provides various energy-efficient solutions within the Altivar 950 category that are aligned with environmental sustainability objectives. Our Schneider Electric products, such as the ATV950D11N4, are crafted with energy efficiency in mind. By using these products into your electrical system, you can enhance energy usage and reduce environmental impact. Additionally, we present affordable pricing for our green Schneider Electric products,, making them an economical choice for supporting sustainability.
-
Is Variable speed drive, Altivar Process ATV900, ATV950, 11 kW, 400/480 V, with braking unit, IP55 offered by BALTELEC legitimate?
Yes, we exclusively offer authentic Schneider Electric products, including but not limited to ATV950D11N4. We obtain our products exclusively through authorized distribution channels to ensure their authenticity and superior quality.
