ATV930U75M3 - Variable speed drive, Altivar Process ATV900, ATV930, 7,5 kW, 200/240 V, with braking unit, IP21 - Schneider Electric
Slot A: communication module for PROFINET
Slot A: communication module for DeviceNet
Slot A: communication module for EtherCAT
Slot A: communication module for CANopen daisy chain RJ45
Slot A: communication module for CANopen SUB-D 9
Slot A: communication module for CANopen screw terminals
Slot A/slot B/slot C: digital and analog I/O extension module
Slot A/slot B/slot C: output relay extension module
Slot B: 5/12 V digital encoder interface module
Slot B: analog encoder interface module
Slot B: resolver encoder interface module
communication module for Ethernet Powerlink
With EMC plate option
5.5 kW for heavy duty
Standard version
+/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output
Relay output R1 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Relay output R2, R3 on resistive load, cos phi = 1: 5 A at 250 V AC
Relay output R2, R3 on resistive load, cos phi = 1: 5 A at 30 V DC
Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
CSA
TÜV
AI1, AI2, AI3 software-configurable current: 0...20 mA/4...20 mA, impedance: 250 Ohm, resolution 12 bits
Constant torque standard
Optimized torque mode
Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)
Positive logic (source) (DI7, DI8), < 0.6 V (state 0), > 2.5 V (state 1)
Positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1)
Software-configurable current AQ1, AQ2: 0...20 mA impedance 500 Ohm, resolution 10 bits
DI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm
4...16 kHz with derating factor
Embedded communication status: 5 LED (dual colour)
Communication module status: 2 LED (dual colour)
Presence of voltage: 1 LED (red)
Can be suppressed
Automatic whatever the load
Not available in permanent magnet motor law
2-wire RS 485
Programmable as pulse output DQ+ 0…30 kHz <= 30 V DC 20 mA
Logic output DQ- 0…1 kHz <= 30 V DC 100 mA
EtherNet/IP
Modbus TCP
7.5 hp for heavy duty
1 RJ45
20.1 A at 200 V (heavy duty)
22.6 A at 240 V (normal duty)
16.9 A at 240 V (heavy duty)
Natural convection: 51 W at 200 V, switching frequency 4 kHz
25.4 A at 4 kHz for heavy duty
38.1 A during 60 s (heavy duty)
Line side: screw terminal 10...16 mm²/AWG 8...AWG 6
Motor: screw terminal 10...16 mm²/AWG 8...AWG 6
DC bus: screw terminal 10...16 mm²/AWG 8...AWG 6
AQ1, AQ2: +/- 0.2 % for analog output
DI7, DI8: pulse input level 1 PLC conforming to IEC 65A-68
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
Asynchronous motors
Synchronous reluctance motor
7.6 kVA at 240 V (heavy duty)
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
Safe torque off: motor
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive
Configurable relay logic R2: sequence relay NO electrical durability 1000000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 1000000 cycles
4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
5 ms +/- 1 ms (DI7, DI8) - pulse input
1 ms +/- 1 ms (AI1, AI2, AI3) - analog input
5 ms +/- 1 ms (AQ1, AQ2) - analog output
Class 3S3 according to IEC 60721-3-3
1000...4800 m with current derating 1 % per 100 m
50…60 °C (with derating factor)
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Dust pollution resistance class 3S3 conforming to EN/IEC 60721-3-3
EN/IEC 61800-3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1
1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
The ATV930U75M3 - Variable speed drive, Altivar Process ATV900, ATV930, 7,5 kW, 200/240 V, with braking unit, IP21 is fashioned to fulfill the expectations of industry experts, such as panel manufacturers, wiring experts, maintenance companies, and OEMs. ATV930U75M3 supplies remarkable capability and utility for engineers in the energy management industry. This Variable speed drive, Altivar Process ATV900, ATV930, 7,5 kW, 200/240 V, with braking unit, IP21 and other Altivar 930 from Schneider Electric are in stock at the most competitive price and turnaround time through BaltElec website, a respected wholesaler aiding specialists in their purchasing needs.
Patrons who have opted for Schneider Electric Altivar 930 have habitually approved the brand's soundness. It has been indicated that the exceptional capability of ATV930U75M3 - Variable speed drive, Altivar Process ATV900, ATV930, 7,5 kW, 200/240 V, with braking unit, IP21 extends to a multitude of purposes. Its elite characteristics make it optimal to meet diverse demands, assuring the success of your industrial, tertiary, and automation ventures.
BaltElec concentrates in accommodating industrial and tertiary professionals’ needs. We know the distinct standards and anticipations of our clients in the domain. By working with BALTELEC, our customers secure access to the superior price and availability of top-tier products like ATV930U75M3 - Variable speed drive, Altivar Process ATV900, ATV930, 7,5 kW, 200/240 V, with braking unit, IP21 from Schneider Electric at cost-effective price. Our registered accounts appreciate exclusive discounts and exclusive assistance.
Begin today and request ATV930U75M3 - Variable speed drive, Altivar Process ATV900, ATV930, 7,5 kW, 200/240 V, with braking unit, IP21 at our well-established and convenient online portal. Don't delay in making this intelligent plan that secures the finest quality and covers the distinct expectations of contractors like your firm.
Should there be any uncertainties or concerns about ATV930U75M3 - Variable speed drive, Altivar Process ATV900, ATV930, 7,5 kW, 200/240 V, with braking unit, IP21 or any other Schneider Electric products, send us a note or refer to our Help section section below. We have gathered answers to standard requests for information to help you further in making an thoughtful decision about industrial and tertiary electrical components.
Remember, ATV930U75M3 - Variable speed drive, Altivar Process ATV900, ATV930, 7,5 kW, 200/240 V, with braking unit, IP21 from Schneider Electric is credible, low-cost, and outstanding to its rivals in the Altivar 930 category. Feel free to make it a part of your infrastructure now. Snap up at BaltElec, your trusted partner for all your Schneider Electric.
In our Baltelec.eu virtual store you will find Variable speed drive, Altivar Process ATV900, ATV930, 7,5 kW, 200/240 V, with braking unit, IP21 - ATV930U75M3 worth 1,588.54 €, which will be a trustworthy and new solution for your needs. This object is engineered by the Schneider Electric brand using the advanced technologies and follows the leading standards of precaution and productivity. We present items from the Altivar 930 category that associate endurance and efficacy, which is an top-notch preference for various applications. In defiance of whether you require hardware for small formation or for competent industrial exploitation, Variable speed drive, Altivar Process ATV900, ATV930, 7,5 kW, 200/240 V, with braking unit, IP21 will be a constant companion in your undertaking.
Baltelec tries to make the buying process as straightforward and fast as possible for our buyers. We offer detailed reports and high-quality shots of Variable speed drive, Altivar Process ATV900, ATV930, 7,5 kW, 200/240 V, with braking unit, IP21 so that you can make an enlightened choice. A team of specialists is always ready to help you with any concerns in the Altivar 930 section related to the electing and use of equipment. We are sure that Variable speed drive, Altivar Process ATV900, ATV930, 7,5 kW, 200/240 V, with braking unit, IP21 will meet your wishes and become an important element of your setup for just 1,588.54 €.
Popular Questions about Schneider Electric ATV930U75M3:
-
Why should I buy ATV930U75M3 from baltelec.eu?
When you buy ATV930U75M3 from Baltelec website, you receive genuine high-quality Schneider Electric Altivar 930 products at the most favorable cost and delivery period. Furthermore, registered accountsenjoy further discounts and expedited requests handling.
-
ATV930U75M3 is appropriate for my technical requirements?
To make sure that ATV930U75M3 - Variable speed drive, Altivar Process ATV900, ATV930, 7,5 kW, 200/240 V, with braking unit, IP21 matches your application, we provide detailed information regarding product's specs, technical characteristics, and in some cases 3D models as well. You can access this data on the product page of the item model. If you require additional help, our customer support team stands ready to assist you in reaching an educated choice.
-
Which warranty coverage is offered for ATV930U75M3 - Variable speed drive, Altivar Process ATV900, ATV930, 7,5 kW, 200/240 V, with braking unit, IP21?
BaltElec emphasizes the excellence of the products we distribute. The standard guarantee coverage for Schneider Electric Altivar 930 including ATV930U75M3 - Variable speed drive, Altivar Process ATV900, ATV930, 7,5 kW, 200/240 V, with braking unit, IP21 is 1 year. Nevertheless, it varies based on the particular item, product category, and could be extended. You can find detailed guarantee information on the ATV930U75M3 dedicated page or by reaching out to our support team representatives.
-
Can you arrange worldwide shipping for Schneider Electric ATV930U75M3 as well as other Schneider Electric products?
Certainly. In addition to catering to Estonia, Latvia, Lithuania and other European Union countries, we offer international shipping for ATV930U75M3. However that delivery options, costs, and delivery schedule can differ based on the destination. For complicated acquisitions, feel free to reach out to BALTELEC sales team.
-
Do Schneider Electric MBC provided by BaltElec meet international standards for security and quality?
Completely. All Schneider Electric products available at Baltelec.eu web store adhere to international norms such as IEC 60898-1 standard and carry the CE mark. These standards assure that the items meet strict safety, technical, dependability, and functional criteria.
-
Can Baltelec.eu offer assistance on incorporating renewable energy solutions, such as solar energy systems or wind power converters, into my projects?
Absolutely! Baltelec.eu understands the importance of clean energy incorporation within community. Our group of experts can support you in picking the appropriate Schneider Electric items, to integrate them into your renewable energy solutions}. We can offer guidance on combining solar energy systems, wind energy converters, and alternative eco-friendly options to optimize energy generation and efficiency.
-
Are there green options offered within the Altivar 930 category to support environmental sustainability?
Certainly! Baltelec.eu online store offers various energy-efficient solutions in the category of Altivar 930 that align with green energy initiatives. Our Schneider Electric products, including the Variable speed drive, Altivar Process ATV900, ATV930, 7,5 kW, 200/240 V, with braking unit, IP21, are crafted with environmental friendliness in mind. By using these products into your electrical system, you can optimize energy usage and minimize environmental impact. Additionally, we present affordable pricing for our eco-friendly Schneider Electric products,, making them an budget-friendly choice for advocating sustainability.
-
Is ATV930U75M3 available by BALTELEC original?
Indeed, we solely sell genuine Schneider Electric products, including Variable speed drive, Altivar Process ATV900, ATV930, 7,5 kW, 200/240 V, with braking unit, IP21. We obtain our products solely through official distribution channels to guarantee their genuineness and superior performance.
