ATV930D30N4 - Variable speed drive, Altivar Process ATV900, ATV930, 30 kW, 400/480 V, with braking unit, IP21 - Schneider Electric
Slot A: communication module for PROFINET
Slot A: communication module for DeviceNet
Slot A: communication module for EtherCAT
Slot A: communication module for CANopen daisy chain RJ45
Slot A: communication module for CANopen SUB-D 9
Slot A: communication module for CANopen screw terminals
Slot A/slot B/slot C: digital and analog I/O extension module
Slot A/slot B/slot C: output relay extension module
Slot B: 5/12 V digital encoder interface module
Slot B: analog encoder interface module
Slot B: resolver encoder interface module
communication module for Ethernet Powerlink
With EMC plate option
22.0 kW for heavy duty
Standard version
+/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output
Relay output R1 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Relay output R2, R3 on resistive load, cos phi = 1: 5 A at 250 V AC
Relay output R2, R3 on resistive load, cos phi = 1: 5 A at 30 V DC
Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
CSA
UL
AI1, AI2, AI3 software-configurable current: 0...20 mA/4...20 mA, impedance: 250 Ohm, resolution 12 bits
Variable torque standard
Optimized torque mode
Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)
Positive logic (source) (DI7, DI8), < 0.6 V (state 0), > 2.5 V (state 1)
Positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1)
Software-configurable current AQ1, AQ2: 0...20 mA impedance 500 Ohm, resolution 10 bits
DI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm
4...16 kHz with derating factor
Embedded communication status: 5 LED (dual colour)
Communication module status: 2 LED (dual colour)
Presence of voltage: 1 LED (red)
Automatic whatever the load
Adjustable
Not available in permanent magnet motor law
2-wire RS 485
Programmable as pulse output DQ+ 0…30 kHz <= 30 V DC 20 mA
Logic output DQ- 0…1 kHz <= 30 V DC 100 mA
EtherNet/IP
Modbus TCP
30.0 hp for heavy duty
1 RJ45
40.5 A at 380 V (heavy duty)
45.9 A at 480 V (normal duty)
35.8 A at 480 V (heavy duty)
Forced convection: 640 W at 380 V, switching frequency 4 kHz
46.3 A at 4 kHz for heavy duty
69.5 A during 60 s (heavy duty)
Line side: screw terminal 25...50 mm²/AWG 4...AWG 1
Motor: screw terminal 25...50 mm²/AWG 4...AWG 1
DC bus: screw terminal 25...50 mm²/AWG 4...AWG 1
AQ1, AQ2: +/- 0.2 % for analog output
DI7, DI8: pulse input level 1 PLC conforming to IEC 65A-68
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
Synchronous motors
Synchronous reluctance motor
29.8 kVA at 480 V (heavy duty)
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
Safe torque off: motor
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive
Configurable relay logic R2: sequence relay NO electrical durability 1000000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 1000000 cycles
4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
5 ms +/- 1 ms (DI7, DI8) - pulse input
1 ms +/- 1 ms (AI1, AI2, AI3) - analog input
5 ms +/- 1 ms (AQ1, AQ2) - analog output
Class 3S3 according to IEC 60721-3-3
1000...4800 m with current derating 1 % per 100 m
50…60 °C (with derating factor)
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Dust pollution resistance class 3S3 conforming to EN/IEC 60721-3-3
EN/IEC 61800-3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1
1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
The ATV930D30N4 - Variable speed drive, Altivar Process ATV900, ATV930, 30 kW, 400/480 V, with braking unit, IP21 is created to cater to the requirements of sector experts, such as switchgear manufacturers, electricians, facility management firms, and primary equipment makers. ATV930D30N4 grants exceptional quality and beneficence for planners in the electrotechnical industry. This Variable speed drive, Altivar Process ATV900, ATV930, 30 kW, 400/480 V, with braking unit, IP21 and other Altivar 930 from Schneider Electric are procurable at the finest pricing and fulfillment period through baltelec.eu, a respected dealer supplying practitioners in their collection needs.
Customers who have procured Schneider Electric Altivar 930 have persistently commended the manufacturer’s robustness. It has been outlined that the superlative operation of ATV930D30N4 - Variable speed drive, Altivar Process ATV900, ATV930, 30 kW, 400/480 V, with braking unit, IP21 extends to a extensive scope of purposes. Its exceptional traits make it ideal solution for diverse needs. Your developed solution will excel in quality, energy-efficiency and price.
Our specialists concentrates in addressing industrial and tertiary professionals’ needs. We recognize the special specifications and requirements of our patrons in the domain. By joining forces with our specialists, your business access access to the superior charges and availability of superior products like ATV930D30N4 - Variable speed drive, Altivar Process ATV900, ATV930, 30 kW, 400/480 V, with braking unit, IP21 from Schneider Electric at a reasonable price. Authorized buyers receive added discounts and expedited requests handling.
Move quickly and obtain ATV930D30N4 - Variable speed drive, Altivar Process ATV900, ATV930, 30 kW, 400/480 V, with braking unit, IP21 at our verified and convenient e-commerce site. Don't delay in making this clever pick that warrants the supreme quality and achieves the unique requirements of vendors like your enterprise.
If there are any matters or concerns about ATV930D30N4 - Variable speed drive, Altivar Process ATV900, ATV930, 30 kW, 400/480 V, with braking unit, IP21 or any other Schneider Electric products, communicate with us or refer to our Frequently Asked Questions section below. We have curated answers to regular matters to benefit you further in making an knowledgeable decision about industrial and tertiary electrical components.
Remember, ATV930D30N4 - Variable speed drive, Altivar Process ATV900, ATV930, 30 kW, 400/480 V, with braking unit, IP21 from Schneider Electric is trustworthy, low-cost, and excellent to other vendors in the Altivar 930 category. Make it a part of your solution straight away. Get at BALTELEC, your dependable vendor for all your Altivar 930.
In our Baltelec.eu electronic store you will find Variable speed drive, Altivar Process ATV900, ATV930, 30 kW, 400/480 V, with braking unit, IP21 - ATV930D30N4 worth 3,869.23 €, which will be a trustworthy and contemporary solution for your requirements. This merchandise is created by the Schneider Electric brand using the newest technologies and satisfies the optimal standards of safety and workmanship. We propose things from the Altivar 930 category that merge endurance and functionality, which is an outstanding decision for various applications. In spite of whether you call for apparatus for small output or for qualified industrial application, Variable speed drive, Altivar Process ATV900, ATV930, 30 kW, 400/480 V, with braking unit, IP21 will be a constant associate in your duty.
Baltelec works to make the acquiring process as smooth and fast as viable for our purchasers. We offer detailed explanations and high-quality images of Variable speed drive, Altivar Process ATV900, ATV930, 30 kW, 400/480 V, with braking unit, IP21 so that you can make an well-informed choice. A team of maestros is always ready to help you with any inquiries in the Altivar 930 section referencing to the choosing and use of commodities. We are convinced that Variable speed drive, Altivar Process ATV900, ATV930, 30 kW, 400/480 V, with braking unit, IP21 will meet your demands and become an essential element of your inventory for just 3,869.23 €.
Common Questions about ATV930D30N4 - Variable speed drive, Altivar Process ATV900, ATV930, 30 kW, 400/480 V, with braking unit, IP21:
-
Why should I order ATV930D30N4 - Variable speed drive, Altivar Process ATV900, ATV930, 30 kW, 400/480 V, with braking unit, IP21 from BaltElec?
When your purchase Schneider Electric Variable speed drive, Altivar Process ATV900, ATV930, 30 kW, 400/480 V, with braking unit, IP21 from Baltelec online store, you will get genuine quality Schneider Electric Altivar 930 products at the best prices and lead time. Additionally, registered accountstake pleasure in further discounts and first-class attention.
-
Can you advise if Schneider Electric ATV930D30N4 is suitable for my contract?
To verify that Schneider Electric Variable speed drive, Altivar Process ATV900, ATV930, 30 kW, 400/480 V, with braking unit, IP21 is suitable for your use case, we offer comprehensive details concerning product's specs, technical characteristics, and in some cases 3D models as well. You can find this data on the dedicated page of the item name. If you seek additional help, our customer service team stands ready to aid you in reaching an informed choice.
-
Which guarantee coverage is offered for Schneider Electric ATV930D30N4?
BALTELEC is committed to the excellence of the items we deliver. The default guarantee coverage for Schneider Electric Altivar 930 including ATV930D30N4 is 12 months. However, it is subject according to the individual product, category, and may even be longer. You can locate comprehensive warranty details on the Schneider Electric Variable speed drive, Altivar Process ATV900, ATV930, 30 kW, 400/480 V, with braking unit, IP21 dedicated page or by reaching out to our customer service team.
-
Do you provide international shipping for Schneider Electric ATV930D30N4 as well as other Schneider Electric items?
Certainly. Apart from serving Estonia, Latvia, Lithuania and other European Union countries, we provide global shipping for Schneider Electric ATV930D30N4. Please note that delivery options, costs, and shipping times may differ based on the destination. For volume requests, feel free to reach out to BALTELEC sales team.
-
Do Schneider Electric MBC offered by Baltelec.eu adhere to international standards for security and quality?
Of course. All Schneider Electric products offered at BALTELEC web store adhere to international norms such as IEC 60898-1 standard and carry the CE mark. Such standards guarantee that the items fulfill strict safety, technological, reliability, and performance criteria.
-
Can BALTELEC provide guidance on incorporating renewable energy solutions, such as solar energy systems or wind power converters, into my projects?
Definitely! Baltelec.eu website understands the relevance of clean energy incorporation within community. Our group of experts can help you in choosing the suitable Schneider Electric items, to incorporate them into your renewable energy solutions}. We can offer advice on integrating solar power systems, wind power converters, and additional sustainable options to maximize energy generation and effectiveness.
-
Are there eco-friendly options available within the Altivar 930 category to support green energy initiatives?
Absolutely! Baltelec.eu online store offers a wide range of energy-efficient solutions in the category of Altivar 930 that are in line with energy-saving goals. Our Schneider Electric products, including the ATV930D30N4 - Variable speed drive, Altivar Process ATV900, ATV930, 30 kW, 400/480 V, with braking unit, IP21, are engineered with energy conservation in mind. By incorporating these products into your electrical system, you can optimize energy usage and reduce environmental impact. Additionally, we provide competitive pricing for our eco-friendly Schneider Electric products,, making them an cost-effective choice for supporting sustainability.
-
Are ATV930D30N4 sold by BaltElec legitimate?
Yes, we exclusively offer original Schneider Electric products, including but not limited to ATV930D30N4. We procure our products solely through legitimate distribution channels to guarantee their legitimacy and high performance.
