ATV650U07N4E - Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi - Schneider Electric
Integrated with 150 m conforming to EN/IEC 61800-3 category C3
0.75 kW (normal duty)
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC
DNV-GL
ATEX INERIS
TÜV
CSA
DNV-GL
AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits
AI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
Optimized torque mode
Variable torque standard
Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)
Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits
Software-configurable current DQ-, DQ+: 30 V DC
Software-configurable current DQ-, DQ+: 100 mA
2...12 kHz adjustable
4 LEDs (dual colour) for communication module status
1 LED (red) for presence of voltage
3 LEDs for local diagnostic
Can be suppressed
Not available in permanent magnet motor law
Not available in permanent magnet motor law
2-wire RS 485
Relay outputs R1A, R1B, R1C 30 V DC 3000 mA
Relay outputs R2A, R2C 250 V AC 5000 mA
Relay outputs R2A, R2C 30 V DC 5000 mA
Relay outputs R3A, R3C 250 V AC 5000 mA
Relay outputs R3A, R3C 30 V DC 5000 mA
Modbus TCP
Modbus serial
1 hp normal duty
RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP
0.9 A at 380 V (heavy duty)
0.8 A at 480 V (heavy duty)
1.5 A at 380 V (normal duty)
2.2 A at 4 kHz for normal duty
2.4 A during 60 s (normal duty)
1.1 x In during 60 s (normal duty)
Motor: screw terminal 4...6 mm²/AWG 12...AWG10
Control: removable screw terminals 0.5...1.5 mm²
AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
DI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2
Synchronous motors
Permanent magnet motor
1.1 kVA at 480 V (normal duty)
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection
Mining mineral and metal fan
Mining mineral and metal pump
Oil and gas fan
Water and waste water other application
Building - HVAC screw compressor
Food and beverage processing pump
Food and beverage processing fan
Food and beverage processing atomization
Oil and gas electro submersible pump (ESP)
Oil and gas water injection pump
Oil and gas jet fuel pump
Oil and gas compressor for refinery
Water and waste water centrifuge pump
Water and waste water positive displacement pump
Water and waste water electro submersible pump (ESP)
Water and waste water screw pump
Water and waste water lobe compressor
Water and waste water screw compressor
Water and waste water compressor centrifugal
Water and waste water fan
Water and waste water conveyor
Water and waste water mixer
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive
Thermal protection: motor
Slot A: communication module, DeviceNet
Slot A: communication module, Modbus TCP/EtherNet/IP
Slot A: communication module, CANopen daisy chain RJ45
Slot A: communication module, CANopen SUB-D 9
Slot A: communication module, CANopen screw terminals
Slot A/slot B: digital and analog I/O extension module
Slot A/slot B: output relay extension module
Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link
Communication module, BACnet MS/TP
Communication module, Ethernet Powerlink
Slot A: communication module, Profibus DP V1
Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
Display unit: 0.1 Hz
5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input
10 ms +/- 1 ms (AO1) - analog output
2 ms +/- 0.5 ms (DI1...DI4) - discrete input
IP55 conforming to IEC 61800-5-1
<= 1000 m without derating
-15…40 °C (without derating)
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
EN/IEC 61800-3 environment 1 category C2
EN/IEC 61800-3 environment 2 category C3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1
1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6
The ATV650U07N4E - Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi is created to serve the needs of professional buyers, such as installers, electrical installers, support service firms, and equipment creators. ATV650U07N4E affords remarkable performance and benefits for designers in the power systems industry. This Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi and other Altivar 650 from Schneider Electric are on offer at the unbeatable price and fulfillment period through BALTELEC online store, a respected dealer aiding industry experts in their sourcing needs.
Customers who have purchased Schneider Electric Altivar 650 have steadily applauded the maker's reliability. It has been noted that the superlative functionality of ATV650U07N4E - Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi extends to a wide range of use. Its ideal characteristics make it well-suited solution to suit a variety of needs, ensuring the success of your industrial, tertiary, and automation projects.
Our specialists dedicates in addressing industrial and tertiary professionals’ needs. We appreciate the special requirements and standards of our patrons in the industry. By partnering with our professionals, your business secure access to the superior charges and inventory of excellent products like ATV650U07N4E - Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi from Schneider Electric at cost-effective price. Our registered accounts enjoy special savings and first-class attention.
Get started and purchase ATV650U07N4E - Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi at our secure and simple virtual storefront. Don't delay in making this smart option that secures the utmost quality and satisfies the individual expectations of clients like yourselves.
In case you have any problems or concerns about ATV650U07N4E - Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi or any other Schneider Electric products, message us or refer to our FAQ section section below. We have brought together answers to routine problems to guide you further in making an wise decision about industrial and tertiary electrical components.
Remember, ATV650U07N4E - Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi from Schneider Electric is safe, value-priced, and elite to alternative suppliers in the Altivar 650 category. Don't hesitate to make it a part of your configuration immediately. Obtain at Baltelec e-shop, your reliable source for all your Schneider Electric.
In our Baltelec.eu e-commerce store you will uncover Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi - ATV650U07N4E worth 898.83 €, which will be a constant and modern solution for your desires. This product is designed by the Schneider Electric brand using the most recent technologies and adheres to the peak standards of defense and capability. We provide products from the Altivar 650 category that associate strength and effectiveness, which is an exceptional possibility for various intents. In defiance of whether you want appliances for small formation or for adept industrial use, Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi will be a reliable assistant in your assignment.
Baltelec strives to make the acquiring process as convenient and fast as doable for our users. We offer detailed explanations and high-quality visuals of Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi so that you can make an versed choice. A team of pros is always ready to help you with any issues in the Altivar 650 section involved to the opting and use of products. We are trusting that Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi will meet your demands and become an important element of your apparatus for just 898.83 €.
Frequently Asked Questions about Schneider Electric ATV650U07N4E:
-
What are the benefits of purchasing Schneider Electric ATV650U07N4E from Baltelec.eu online store?
When buying ATV650U07N4E - Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi from BALTELEC, you will get original high-quality Schneider Electric Altivar 650 products at the most favorable cost and delivery schedule. Furthermore, our partnersget further discounts and preferred assistance.
-
Can Baltelec consult if ATV650U07N4E - Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi is suitable for my undertaking?
To confirm that ATV650U07N4E matches your application, we provide detailed details pertaining to product's specs, technical characteristics, and interoperability. You can access this data on the dedicated page of the item name. If you seek additional help, our support team representative is available to assist you in reaching an well-informed decision.
-
What warranty coverage is provided for Schneider Electric Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi?
Baltelec website stands for the quality of the items we sell. The regular warranty coverage for Schneider Electric Altivar 650 including ATV650U07N4E is 12 months. Nevertheless, it depends depending on the particular product, product category, and could be longer. You can discover specific guarantee details on the Schneider Electric ATV650U07N4E product page or by contacting our customer service representatives.
-
Do you provide global shipping for Schneider Electric Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi as well as other Schneider Electric items?
Certainly. Apart from catering to Estonia, Latvia, Lithuania and other European Union countries, we provide worldwide shipping for ATV650U07N4E - Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi. Please keep in mind that shipping options, costs, and delivery schedule may differ based on the destination. In the case of complicated orders, please consult BALTELEC sales staff.
-
Do Schneider Electric MBC offered by Baltelec.eu adhere to international standards for safety and reliability?
Yes. All Schneider Electric products available at Baltelec web store adhere to global standards such as IEC 60898-1 standard and carry the CE certification. Such standards guarantee that the items meet rigorous security, technological, reliability, and performance criteria.
-
Can BALTELEC provide guidance on incorporating renewable energy solutions, such as solar power systems or wind energy converters, into my projects?
Yes! Baltelec online store recognizes the significance of clean energy incorporation within community. Our group of professionals can help you in picking the suitable Schneider Electric items, to integrate them into your renewable energy projects}. We can offer guidance on integrating solar energy systems, wind power converters, and additional eco-friendly options to optimize power generation and efficiency.
-
Are there energy-efficient options offered within the Altivar 650 category to support environmental sustainability?
Definitely!Yes! Baltelec.eu online store offers numerous eco-friendly solutions within the Altivar 650 category that align with green energy initiatives. Our Schneider Electric products, such as the Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi, are engineered with environmental friendliness in mind. By using these products into your electrical system, you can enhance energy usage and lower environmental impact. Additionally, we present attractive pricing for our eco-friendly Schneider Electric products,, making them an cost-effective choice for promoting sustainability.
-
Are Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi offered by BALTELEC original?
Indeed, we only provide authentic Schneider Electric products, including Variable speed drive, Altivar Process ATV600, ATV650, 0.75kW/1 hp, 380...480 V, IP55, disconnect swi. We source our products exclusively through official distribution channels to ensure their genuineness and high standards.
