All categories
Compare Cart

ATV650D75N4 - Variable speed drive, Altivar Process ATV600, ATV650, 75kW/100 hp, 380...480 V, IP55 - Schneider Electric

Expected in 2-4 weeks
ATV650D75N4 - Variable speed drive, Altivar Process ATV600, ATV650, 75kW/100 hp, 380...480 V, IP55 - Schneider Electric - Variable speed drive, Altivar Process ATV600, ATV650, 75kW/100 hp, 380...480 V, IP55 - Schneider Electric - 0
ATV650D75N4 - Variable speed drive, Altivar Process ATV600, ATV650, 75kW/100 hp, 380...480 V, IP55 - Schneider Electric
6 232,85 € excl. VAT
7 728,74 € incl. VAT
Text About:
Variable speed drive, Altivar Process ATV600, ATV650, 75kW/100 hp, 380...480 V, IP55 - Schneider Electric
7 728,74 €
SPECIFICATIONS
Main
Device short name ATV650
product specific application Process and utilities
Safety function STO (safe torque off) SIL 3
emc filter Integrated with 150 m conforming to EN/IEC 61800-3 category C3
motor power kW 55.0 kW (heavy duty)
75.0 kW (normal duty)
variant Standard version
Complementary
Accuracy +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
maximum switching current Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC
Product certifications UL
DNV-GL
CSA
ABS
Bureau Veritas
TÜV
ATEX INERIS
data formats 8 bits, configurable odd, even or no parity
Handle front plate colour 1250 mm
Product or component type Variable speed drive
[us] rated supply voltage 380...480 V - 15...10 %
minimum switching current Relay output R1, R2, R3: 5 mA at 24 V DC
noise level 69.9 dB
marking CE
Quantity per set 1
Analogue input number 3
Analogue input type AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits
AI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
refresh time Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
Analogue output number 2
Asynchronous motor control profile Constant torque standard
Optimized torque mode
Optimized torque mode
Discrete input logic Positive logic (source) (DI1...DI8), < 5 V (state 0), > 11 V (state 1)
Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)
output voltage <= power supply voltage
width (w) 345 mm
Analogue output type Software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits
Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits
Software-configurable current DQ-, DQ+: 30 V DC
Software-configurable current DQ-, DQ+: 100 mA
Discrete input type DI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
isolation Between power and control terminals
switching frequency 2...8 kHz adjustable
2.5...8 kHz with derating factor
Local signalling 3 LEDs (dual colour) for embedded communication status
4 LEDs (dual colour) for communication module status
1 LED (red) for presence of voltage
3 LEDs for local diagnostic
motor slip compensation Not available in permanent magnet motor law
Adjustable
Can be suppressed
Adjustable
Mounting mode Wall mount
Braking to standstill By DC injection
Discrete input number 8
Net weight 87 kg
physical interface Ethernet
2-wire RS 485
Discrete output type Relay outputs R1A, R1B, R1C 250 V AC 3000 mA
Relay outputs R1A, R1B, R1C 30 V DC 3000 mA
Relay outputs R2A, R2C 250 V AC 5000 mA
Relay outputs R2A, R2C 30 V DC 5000 mA
Relay outputs R3A, R3C 250 V AC 5000 mA
Relay outputs R3A, R3C 30 V DC 5000 mA
Operating position Vertical +/- 10 degree
communication port protocol Modbus TCP
Ethernet
Modbus TCP
Motor power hp 60 hp heavy duty
100 hp normal duty
connector type RJ45 (on the remote graphic terminal) for Modbus serial
RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP
depth 375 mm
line current 84.2 A at 480 V (normal duty)
81.4 A at 380 V (heavy duty)
71.8 A at 480 V (heavy duty)
131.3 A at 380 V (normal duty)
continuous output current 87 A for heavy duty
145 A at 2.5 kHz for normal duty
Motor power range ac-3 55…100 kW at 380…440 V 3 phases
maximum transient current 132 A during 60 s (heavy duty)
159.5 A during 60 s (normal duty)
Permissible temporary current boost 1.5 x In during 60 s (heavy duty)
1.1 x In during 60 s (normal duty)
Pollution degree 3
electrical connection Motor: screw terminal 70...120 mm²/AWG 1/0...250 kcmil
Line side: screw terminal 70...95 mm²/AWG 1...250 kcmil
Control: removable screw terminals 0.5...1.5 mm²/AWG 20...AWG 16
linearity error AO1, AO2: +/- 0.2 % for analog output
AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input
Network number of phases 3 phases
nominal switching frequency 2.5 kHz
Enclosure mounting Wall mounted
maximum output frequency 500 kHz
Exchange mode Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP
Input compatibility DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
DI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2
Product destination Asynchronous motors
Synchronous motors
Maximum input current 131.3 A
Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27
Method of access Slave Modbus TCP
synchronous motor control profile Synchronous reluctance motor
Permanent magnet motor
Supply frequency 50...60 Hz - 5...5 %
apparent power 59.7 kVA at 480 V (heavy duty)
93.7 kVA at 480 V (normal duty)
number of addresses 1…247 for Modbus serial
Supply Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection
variable speed drive application selection Building - HVAC compressor centrifugal
acceleration and deceleration ramps Linear adjustable separately from 0.01...9999 s
Protection type Safe torque off: motor
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive
Thermal protection: motor
Option card Slot A: communication module, PROFINET
Slot A: communication module, DeviceNet
Slot A: communication module, Modbus TCP/EtherNet/IP
Slot A: communication module, CANopen daisy chain RJ45
Slot A: communication module, CANopen SUB-D 9
Slot A: communication module, CANopen screw terminals
Slot A/slot B: digital and analog I/O extension module
Slot A/slot B: output relay extension module
Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link
Communication module, BACnet MS/TP
Communication module, Ethernet Powerlink
Slot A: communication module, Profibus DP V1
relay output type Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
Transmission rate 10, 100 Mbits
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
Type of cooling Forced convection
frequency resolution Analog input: 0.012/50 Hz
Display unit: 0.1 Hz
Prospective line isc 50 kA
transmission frame RTU
Relay output number 3
Sampling duration 5 ms +/- 1 ms (DI5, DI6) - discrete input
5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input
10 ms +/- 1 ms (AO1) - analog output
2 ms +/- 0.5 ms (DI1...DI4) - discrete input
Speed drive output frequency 0.1…500 Hz
Type of polarization No impedance
Environment
Ambient air temp for storage/transportation -40…70 °C
ip degree of protection IP55 conforming to IEC 60529
IP55 conforming to IEC 61800-5-1
operating altitude 1000...4800 m with current derating 1 % per 100 m
<= 1000 m without derating
Range of product Altivar Process ATV600
ambient air temperature for operation 40…50 °C (with derating factor)
-15…40 °C (without derating)
electromagnetic compatibility Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
overvoltage category III
standards EN/IEC 61800-3
EN/IEC 61800-3 environment 1 category C2
EN/IEC 61800-3 environment 2 category C3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1
UL 508C
relative humidity 5…95 % without condensation conforming to IEC 60068-2-3
Maximum thdi <48 % from 80...100 % of load conforming to IEC 61000-3-12
Regulation loop Adjustable PID regulator
vibration resistance 1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6
insulation resistance > 1 MOhm 500 V DC for 1 minute to earth
About this product

The ATV650D75N4 - Variable speed drive, Altivar Process ATV600, ATV650, 75kW/100 hp, 380...480 V, IP55 is created to respond to the necessities of business buyers, such as switchboard fabricators, electrical technicians, facility upkeep providers, and primary equipment suppliers. ATV650D75N4 offers outstanding reliability and gain for specialists in the energy management industry. This Variable speed drive, Altivar Process ATV600, ATV650, 75kW/100 hp, 380...480 V, IP55 and other Altivar 650 from Schneider Electric are on offer at the optimal price and delivery period through BALTELEC.EU, an independent dealer supplying industry experts in their purchasing needs.

Users who have selected Schneider Electric Altivar 650 have continuously applauded the creator's soundness. It has been outlined that the excellent competence of ATV650D75N4 - Variable speed drive, Altivar Process ATV600, ATV650, 75kW/100 hp, 380...480 V, IP55 extends to a diverse range of use. Its elite features make it ideal solution for diverse needs, ensuring the success of your industrial, tertiary, and automation projects.

Our specialists specializes in fulfilling industrial and tertiary professionals’ needs. We understand the particular demands and requirements of our consumers in the sector. By aligning with our professionals, your enterprise obtain access to the optimal pricing and delivery schedule of the top-of-the-line products like ATV650D75N4 - Variable speed drive, Altivar Process ATV600, ATV650, 75kW/100 hp, 380...480 V, IP55 from Schneider Electric at a budget-friendly price. Professional buyers with Baltelec account enjoy exclusive discounts and expedited requests handling.

Don't wait and obtain ATV650D75N4 - Variable speed drive, Altivar Process ATV600, ATV650, 75kW/100 hp, 380...480 V, IP55 at our secure and user-friendly online store. Don't delay in making this wise decision that secures the best quality and covers the specific necessities of traders like your business.

If you face any issues or concerns about ATV650D75N4 - Variable speed drive, Altivar Process ATV600, ATV650, 75kW/100 hp, 380...480 V, IP55 or any other Schneider Electric products, message us or refer to our Knowledge base section below. We have provided answers to common concerns to aid you further in making an informed decision about industrial and tertiary electrical components.

Remember, ATV650D75N4 - Variable speed drive, Altivar Process ATV600, ATV650, 75kW/100 hp, 380...480 V, IP55 from Schneider Electric is steady, inexpensive, and outstanding to opposing companies in the Altivar 650 category. Feel free to make it a part of your apparatus right now. Purchase at BaltElec, your reliable source for all your Altivar 650.

In our Baltelec.eu cyber store you will find Variable speed drive, Altivar Process ATV600, ATV650, 75kW/100 hp, 380...480 V, IP55 - ATV650D75N4 worth 7,604.08 €, which will be a reliable and up-to-date solution for your necessities. This object is developed by the Schneider Electric brand using the state-of-the-art technologies and follows the uppermost standards of safety and productivity. We deliver articles from the Altivar 650 category that unite robustness and workability, which is an superb option for various roles. Without consideration of whether you crave appliances for small assembly or for competent industrial utilization, Variable speed drive, Altivar Process ATV600, ATV650, 75kW/100 hp, 380...480 V, IP55 will be a trustworthy aid in your occupation.

Baltelec attempts to make the attaining process as smooth and fast as achievable for our buyers. We offer detailed explanations and high-quality photographs of Variable speed drive, Altivar Process ATV600, ATV650, 75kW/100 hp, 380...480 V, IP55 so that you can make an briefed choice. A team of maestros is always ready to help you with any questions in the Altivar 650 section relevant to the picking and use of materials. We are persuaded that Variable speed drive, Altivar Process ATV600, ATV650, 75kW/100 hp, 380...480 V, IP55 will meet your hopes and become an crucial element of your device for just 7,604.08 €.

Common Questions about ATV650D75N4 - Variable speed drive, Altivar Process ATV600, ATV650, 75kW/100 hp, 380...480 V, IP55:

Recently viewed
ATV650D75N4 - Schneider Electric
Variable speed drive, Altivar Process ATV600, ATV650, 75kW/100 hp, 380...480 V, IP55
6 232,85 € excl. VAT
7 728,74 € incl. VAT
Expected in 2-4 weeks