ATV650D30N4 - Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55 - Schneider Electric
Integrated with 150 m conforming to EN/IEC 61800-3 category C3
30.0 kW (normal duty)
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC
TÜV
UL
Bureau Veritas
DNV-GL
ABS
CSA
AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits
AI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
Optimized torque mode
Variable torque standard
Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)
Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits
Software-configurable current DQ-, DQ+: 30 V DC
Software-configurable current DQ-, DQ+: 100 mA
2...12 kHz adjustable
4 LEDs (dual colour) for communication module status
1 LED (red) for presence of voltage
3 LEDs for local diagnostic
Not available in permanent magnet motor law
Adjustable
Adjustable
2-wire RS 485
Relay outputs R1A, R1B, R1C 30 V DC 3000 mA
Relay outputs R2A, R2C 250 V AC 5000 mA
Relay outputs R2A, R2C 30 V DC 5000 mA
Relay outputs R3A, R3C 250 V AC 5000 mA
Relay outputs R3A, R3C 30 V DC 5000 mA
Modbus TCP
Modbus TCP
40 hp normal duty
RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP
34.1 A at 380 V (heavy duty)
29.9 A at 480 V (heavy duty)
53.3 A at 380 V (normal duty)
46.3 A at 4 kHz for heavy duty
67.7 A during 60 s (heavy duty)
1.1 x In during 60 s (normal duty)
Line side: screw terminal 10...16 mm²/AWG 8...AWG 6
Control: removable screw terminals 0.5...1.5 mm²/AWG 20...AWG 16
AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
DI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2
Synchronous motors
Permanent magnet motor
38.2 kVA at 480 V (normal duty)
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive
Thermal protection: motor
Slot A: communication module, DeviceNet
Slot A: communication module, Modbus TCP/EtherNet/IP
Slot A: communication module, CANopen daisy chain RJ45
Slot A: communication module, CANopen SUB-D 9
Slot A: communication module, CANopen screw terminals
Slot A/slot B: digital and analog I/O extension module
Slot A/slot B: output relay extension module
Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link
Communication module, BACnet MS/TP
Communication module, Ethernet Powerlink
Slot A: communication module, Profibus DP V1
Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
Display unit: 0.1 Hz
5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input
10 ms +/- 1 ms (AO1) - analog output
2 ms +/- 0.5 ms (DI1...DI4) - discrete input
IP55 conforming to IEC 61800-5-1
<= 1000 m without derating
-15…40 °C (without derating)
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
EN/IEC 61800-3 environment 1 category C2
EN/IEC 61800-3 environment 2 category C3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1
UL 508C
1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6
The ATV650D30N4 - Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55 is devised to meet the conditions of trade professionals, such as control panel builders, electrical technicians, upkeep firms, and OEMs. ATV650D30N4 provides outstanding durability and utility for planners in the electromechanical industry. This Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55 and other Altivar 650 from Schneider Electric can be bought the best price and supply period through BaltElec, a distinguished distributor meeting the needs of specialists in their acquisition needs.
Consumers who have acquired Schneider Electric Altivar 650 have steadily admired the creator's sturdiness. It has been emphasized that the superlative operation of ATV650D30N4 - Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55 extends to a extensive scope of implementations. Its elite attributes make it suitable for diverse needs, promoting success in your industrial, tertiary, and automation efforts.
BaltElec concentrates in accommodating industrial and tertiary professionals’ needs. We understand the special specifications and expectations of our customers in the market. By cooperating with our specialists, your company gain access to the leading fees and inventory of high-quality products like ATV650D30N4 - Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55 from Schneider Electric at the lowest price. Professional buyers with Baltelec account appreciate added discounts and expedited requests handling.
Seize the moment and obtain ATV650D30N4 - Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55 at our well-established and hassle-free e-commerce site. Don't delay in making this wise option that certifies the supreme quality and adheres to the specific prerequisites of users like you.
When you have any doubts or concerns about ATV650D30N4 - Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55 or any other Schneider Electric products, send us a note or refer to our FAQs section below. We have gathered answers to typical matters to aid you further in making an informed decision about industrial and tertiary electrical components.
Remember, ATV650D30N4 - Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55 from Schneider Electric is trustworthy, budget-friendly, and outstanding to other vendors in the Altivar 650 category. Make it a part of your apparatus this moment. Buy at Baltelec webstore, your reliable source for all your professional electrical equipment and automation needs.
In our Baltelec.eu e-commerce store you will come across Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55 - ATV650D30N4 worth 3,632.43 €, which will be a faithful and contemporary solution for your requirements. This product is formulated by the Schneider Electric brand using the current technologies and fulfills the pinnacle standards of safety and workmanship. We give products from the Altivar 650 category that fuse lastingness and efficacy, which is an premium choice for various operations. In defiance of whether you necessitate instruments for small formation or for competent industrial exploitation, Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55 will be a secure aid in your project.
Baltelec efforts to make the procuring process as convenient and fast as feasible for our customers. We offer detailed depictions and high-quality illustrations of Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55 so that you can make an educated choice. A team of virtuosos is always ready to help you with any inquiries in the Altivar 650 section connected to the choosing and use of items. We are persuaded that Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55 will meet your standards and become an needed element of your device for just 3,632.43 €.
FAQ about ATV650D30N4:
-
What are the advantages of ordering Schneider Electric ATV650D30N4 from BALTELEC?
When your purchase ATV650D30N4 from BaltElec, you receive authentic quality Schneider Electric Altivar 650 products at the most competitive prices and delivery schedule. Additionally, registered professionalstake pleasure in additional savings and preferred assistance.
-
Can you advise if Schneider Electric Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55 suits for my contract?
To ensure that ATV650D30N4 - Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55 meets the requirements of your project, we provide thorough details regarding product's specs, technical characteristics, and in some cases 3D models as well. You can access this data on the dedicated page of the item model. If you require further assistance, our customer service representative stands ready to assist you in making an informed choice.
-
What guarantee coverage is offered for ATV650D30N4 - Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55?
Baltelec website stands for the excellence of the items we sell. The default guarantee coverage for Schneider Electric Altivar 650 including Schneider Electric ATV650D30N4 is 12 months. However, it depends based on the individual item, category, and could be extended. You can locate detailed guarantee details on the Schneider Electric ATV650D30N4 dedicated page or by getting in touch with our customer service representatives.
-
Do you offer global shipping for ATV650D30N4 - Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55 as well as other Schneider Electric products?
Absolutely. Apart from serving Estonia, Latvia, Lithuania and other European Union countries, we provide worldwide shipping for Schneider Electric Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55. However that shipping options, fees, and shipping times can differ depending on the shipping location. For complicated inquiries, feel free to reach out to BaltElec sales representatives.
-
Do Schneider Electric MBC offered by BaltElec adhere to global standards for safety and quality?
Yes. All Schneider Electric products available at Baltelec web store conform to international norms such as IEC 60898-1 and carry the CE certification. Such norms ensure that the products fulfill strict security, technical, reliability, and performance criteria.
-
Can Baltelec.eu provide guidance on integrating renewable energy solutions, such as solar energy systems or wind power converters, into my projects?
Certainly! Baltelec website recognizes the importance of sustainable energy integration within projects. Our group of specialists can help you in selecting the right Schneider Electric items, to incorporate them into your renewable energy solutions}. We can provide advice on integrating solar energy systems, wind power converters, and other eco-friendly options to optimize energy generation and effectiveness.
-
Are there eco-friendly options offered within the Altivar 650 category to support energy conservation efforts?
Absolutely! Baltelec.eu online store offers a wide range of energy-efficient solutions within the Altivar 650 category that are aligned with green energy initiatives. Our brand's Schneider Electric products, such as the ATV650D30N4 - Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55, are designed with energy efficiency in mind. By using these products into your electrical system, you can optimize energy usage and reduce environmental impact. Additionally, we present competitive pricing for our green Schneider Electric products,, making them an cost-effective choice for promoting sustainability.
-
Is Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55 available by BaltElec e-shop authentic?
Indeed, we only provide original Schneider Electric products, including but not limited to Variable speed drive, Altivar Process ATV600, ATV650, 30 kW, 400...480 V, IP55. We obtain our products only through authorized distribution channels to assure their legitimacy and superior performance.
