ATV650D18N4 - Variable speed drive, Altivar Process ATV600, ATV650, 18.5 kW, 400...480 V, IP55 - Schneider Electric
Integrated with 150 m conforming to EN/IEC 61800-3 category C3
18.5 kW (normal duty)
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC
Bureau Veritas
TÜV
ATEX INERIS
DNV-GL
ABS
AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits
AI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
Variable torque standard
Variable torque standard
Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)
Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits
Software-configurable current DQ-, DQ+: 30 V DC
Software-configurable current DQ-, DQ+: 100 mA
2...12 kHz adjustable
4 LEDs (dual colour) for communication module status
1 LED (red) for presence of voltage
3 LEDs for local diagnostic
Not available in permanent magnet motor law
Automatic whatever the load
Automatic whatever the load
2-wire RS 485
Relay outputs R1A, R1B, R1C 30 V DC 3000 mA
Relay outputs R2A, R2C 250 V AC 5000 mA
Relay outputs R2A, R2C 30 V DC 5000 mA
Relay outputs R3A, R3C 250 V AC 5000 mA
Relay outputs R3A, R3C 30 V DC 5000 mA
Modbus serial
Modbus TCP
25 hp normal duty
RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP
20.6 A at 380 V (heavy duty)
18.1 A at 480 V (heavy duty)
33.4 A at 380 V (normal duty)
39.2 A at 4 kHz for normal duty
43.1 A during 60 s (normal duty)
1.1 x In during 60 s (normal duty)
Motor: screw terminal 10...16 mm²/AWG 8...AWG 6
Control: removable screw terminals 0.5...1.5 mm²/AWG 20...AWG 16
AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
DI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2
Synchronous motors
Permanent magnet motor
24 kVA at 480 V (normal duty)
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive
Thermal protection: motor
Slot A: communication module, DeviceNet
Slot A: communication module, Modbus TCP/EtherNet/IP
Slot A: communication module, CANopen daisy chain RJ45
Slot A: communication module, CANopen SUB-D 9
Slot A: communication module, CANopen screw terminals
Slot A/slot B: digital and analog I/O extension module
Slot A/slot B: output relay extension module
Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link
Communication module, BACnet MS/TP
Communication module, Ethernet Powerlink
Slot A: communication module, Profibus DP V1
Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
Display unit: 0.1 Hz
5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input
10 ms +/- 1 ms (AO1) - analog output
2 ms +/- 0.5 ms (DI1...DI4) - discrete input
IP55 conforming to IEC 61800-5-1
<= 1000 m without derating
-15…40 °C (without derating)
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
EN/IEC 61800-3 environment 1 category C2
EN/IEC 61800-3 environment 2 category C3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1
UL 508C
1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6
The ATV650D18N4 - Variable speed drive, Altivar Process ATV600, ATV650, 18.5 kW, 400...480 V, IP55 is designed to satisfy the obligations of sector experts, such as switchboard fabricators, electricians, facility upkeep providers, and Original Equipment manufacturers. ATV650D18N4 dispenses superb robustness and beneficence for planners in the energy management industry. This Variable speed drive, Altivar Process ATV600, ATV650, 18.5 kW, 400...480 V, IP55 and other Altivar 650 from Schneider Electric are available at the optimal price and shipment duration through BALTELEC online store, an independent wholesaler catering to engineers in their supply needs.
Consumers who have selected Schneider Electric Altivar 650 have consistently approved the creator's stability. It has been emphasized that the excellent operation of ATV650D18N4 - Variable speed drive, Altivar Process ATV600, ATV650, 18.5 kW, 400...480 V, IP55 extends to a assortment of utilizations. Its top-notch characteristics make it suitable to suit a variety of needs, ensuring your industrial, tertiary and automation projects success.
Our experts centers in providing for industrial and tertiary professionals’ needs. We know the unique requirements and anticipations of our clients in the industry. By working with our experts, your team get access to the superior costs and delivery period of top-tier products like ATV650D18N4 - Variable speed drive, Altivar Process ATV600, ATV650, 18.5 kW, 400...480 V, IP55 from Schneider Electric at an attractive price. Registered users benefit from special savings and dedicated support.
Don't wait and secure ATV650D18N4 - Variable speed drive, Altivar Process ATV600, ATV650, 18.5 kW, 400...480 V, IP55 at our verified and simple digital marketplace. Don't delay in making this wise action that certifies the finest quality and achieves the special criteria of suppliers like yourselves.
Should there be any queries or concerns about ATV650D18N4 - Variable speed drive, Altivar Process ATV600, ATV650, 18.5 kW, 400...480 V, IP55 or any other Schneider Electric products, email us or refer to our Common Questions section below. We have provided answers to typical problems to support you further in making an knowledgeable decision about industrial and tertiary electrical components.
Remember, ATV650D18N4 - Variable speed drive, Altivar Process ATV600, ATV650, 18.5 kW, 400...480 V, IP55 from Schneider Electric is credible, budget-friendly, and better to alternative suppliers in the Altivar 650 category. Don't hesitate to make it a part of your electrical system today. Acquire at Baltelec e-shop, your faithful dealer for all your Altivar 650.
In our Baltelec.eu dot-com store you will spot Variable speed drive, Altivar Process ATV600, ATV650, 18.5 kW, 400...480 V, IP55 - ATV650D18N4 worth 2,727.85 €, which will be a secure and cutting-edge solution for your requirements. This produce is produced by the Schneider Electric brand using the latest technologies and obeys the peak standards of precaution and capability. We give merchandise from the Altivar 650 category that mix sturdiness and usability, which is an premium option for various functions. In spite of whether you need tools for small construction or for specialized industrial application, Variable speed drive, Altivar Process ATV600, ATV650, 18.5 kW, 400...480 V, IP55 will be a trustworthy partner in your duty.
Baltelec attempts to make the obtaining process as straightforward and fast as possible for our purchasers. We offer detailed reports and high-quality photos of Variable speed drive, Altivar Process ATV600, ATV650, 18.5 kW, 400...480 V, IP55 so that you can make an versed choice. A team of masters is always ready to help you with any concerns in the Altivar 650 section affiliated to the deciding and use of articles. We are persuaded that Variable speed drive, Altivar Process ATV600, ATV650, 18.5 kW, 400...480 V, IP55 will meet your hopes and become an needed element of your kit for just 2,727.85 €.
Customer Queries about Schneider Electric ATV650D18N4:
-
Why should I order Schneider Electric ATV650D18N4 from baltelec.eu?
When ordering ATV650D18N4 - Variable speed drive, Altivar Process ATV600, ATV650, 18.5 kW, 400...480 V, IP55 from BaltElec, you will obtain authentic high-quality Schneider Electric Altivar 650 products at the most advantageous pricing and lead time. Furthermore, registered accountsreceive additional savings and expedited requests handling.
-
Can BaltElec advise if Schneider Electric Variable speed drive, Altivar Process ATV600, ATV650, 18.5 kW, 400...480 V, IP55 suits for my technical requirements?
To confirm that ATV650D18N4 - Variable speed drive, Altivar Process ATV600, ATV650, 18.5 kW, 400...480 V, IP55 matches your project, we provide detailed information concerning product's specs, technical characteristics, and compatibility. You can access this data on the product page of the item model. If you seek further assistance, our customer support representative is prepared to assist you in reaching an well-informed choice.
-
What warranty coverage is provided for ATV650D18N4?
Baltelec website emphasizes the quality of the products we deliver. The regular warranty coverage for Schneider Electric Altivar 650 including Schneider Electric Variable speed drive, Altivar Process ATV600, ATV650, 18.5 kW, 400...480 V, IP55 is 1 year. However, it is subject according to the particular item, product category, and may even be longer. You can find specific guarantee information on the ATV650D18N4 - Variable speed drive, Altivar Process ATV600, ATV650, 18.5 kW, 400...480 V, IP55 dedicated page or by contacting our customer service representatives.
-
Can you offer international shipping for ATV650D18N4 and other Schneider Electric items?
Yes. Apart from serving Estonia, Latvia, Lithuania and other European Union countries, we offer worldwide shipping for Schneider Electric ATV650D18N4. Please be aware that delivery options, fees, and delivery times might differ based on the shipping location. In the case of bulk acquisitions, please consult Baltelec.eu sales team.
-
Do Schneider Electric MBC offered by BaltElec meet international standards for security and quality?
Completely. All Schneider Electric items provided at BALTELEC online store conform to international norms such as IEC 60898-1 standard and carry the CE mark. These norms ensure that the products meet strict safety, technical, dependability, and performance criteria.
-
Can BaltElec provide guidance on incorporating renewable energy solutions, such as solar power systems or wind power converters, into my projects?
Yes! Baltelec online store acknowledges the relevance of renewable energy integration within community. Our group of specialists can assist you in selecting the appropriate Schneider Electric products, to incorporate them into your renewable energy projects}. We can offer guidance on combining solar power systems, wind power converters, and alternative eco-friendly options to maximize energy generation and effectiveness.
-
Are there eco-friendly options offered within the Altivar 650 category to support energy conservation efforts?
Absolutely! BaltElec offers a wide range of eco-friendly solutions within the Altivar 650 category that align with environmental sustainability objectives. Our Schneider Electric products, including the ATV650D18N4, are engineered with environmental friendliness in mind. By incorporating these products into your electrical system, you can optimize energy usage and minimize environmental impact. Additionally, we offer affordable pricing for our green Schneider Electric products,, making them an economical choice for supporting sustainability.
-
Are ATV650D18N4 sold by BaltElec e-shop original?
Absolutely, we solely sell authentic Schneider Electric products, including but not limited to Variable speed drive, Altivar Process ATV600, ATV650, 18.5 kW, 400...480 V, IP55. We obtain our products solely through legitimate distribution channels to ensure their genuineness and superior standards.
