ATV650C20N4F - Variable speed drive, Altivar Process ATV600, ATV650, 200 kW, 380...440 V, IP54, disconnect switch - Schneider Electric

Expected in 2-4 weeks

17 873,14 € excl. VAT

21 805,23 € incl. VAT

Text About:

Variable speed drive, Altivar Process ATV600, ATV650, 200 kW, 380...440 V, IP54, disconnect switch - Schneider Electric

In cart

21 805,23 €

SPECIFICATIONS

Main

Device short name ATV650

product specific application Process and utilities

Safety function STO (safe torque off) SIL 3

emc filter Integrated with 150 m conforming to EN/IEC 61800-3 category C3

motor power kW 200 kW (normal duty)
160 kW (heavy duty)

variant With disconnect switch

Complementary

Accuracy +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input

maximum switching current Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC

Product certifications TÜV
CSA
ATEX zone 2/22
ATEX INERIS
RoHS

data formats 8 bits, configurable odd, even or no parity

Handle front plate colour 2350 mm

Product or component type Variable speed drive

[us] rated supply voltage 380...440 V - 15...10 %

minimum switching current Relay output R1, R2, R3: 5 mA at 24 V DC

noise level 70 dB

marking CE

Quantity per set 1

Analogue input number 3

Analogue input type AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits
AI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits

refresh time Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)

Analogue output number 2

Asynchronous motor control profile Constant torque standard
Optimized torque mode
Variable torque standard

Discrete input logic Positive logic (source) (DI1...DI8), < 5 V (state 0), > 11 V (state 1)
Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)

output voltage <= power supply voltage

width (w) 600 mm

Analogue output type Software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits
Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits
Software-configurable current DQ-, DQ+: 30 V DC
Software-configurable current DQ-, DQ+: 100 mA

Discrete input type DI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)

isolation Between power and control terminals

switching frequency 2...8 kHz adjustable
2.5...8 kHz with derating factor

Local signalling 3 LEDs (dual colour) for embedded communication status
4 LEDs (dual colour) for communication module status
1 LED (red) for presence of voltage
3 LEDs for local diagnostic

motor slip compensation Not available in permanent magnet motor law
Can be suppressed
Automatic whatever the load
Can be suppressed

Mounting mode Floor-standing

Braking to standstill By DC injection

Discrete input number 8

Net weight 420 kg

physical interface Ethernet
2-wire RS 485

Discrete output type Relay outputs R1A, R1B, R1C 250 V AC 3000 mA
Relay outputs R1A, R1B, R1C 30 V DC 3000 mA
Relay outputs R2A, R2C 250 V AC 5000 mA
Relay outputs R2A, R2C 30 V DC 5000 mA
Relay outputs R3A, R3C 250 V AC 5000 mA
Relay outputs R3A, R3C 30 V DC 5000 mA

Operating position Vertical +/- 10 degree

communication port protocol Ethernet
Modbus TCP
Modbus serial

connector type RJ45 (on the remote graphic terminal) for Modbus serial
RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP

depth 669 mm

line current 319 A at 400 V (heavy duty)
262 A at 380 V (normal duty)
369 A at 380 V (heavy duty)
302 A at 400 V (normal duty)

power dissipation in w 4030 W, switching frequency 2.5 kHz (heavy duty)
4380 W, switching frequency 2.5 kHz (normal duty)

continuous output current 370 A at 2.5 kHz for normal duty
302 A at 2.5 kHz for heavy duty

Motor power range ac-3 110…220 kW at 480…500 V 3 phases
110…220 kW at 380…440 V 3 phases

maximum transient current 407 A during 60 s (normal duty)
453 A during 60 s (heavy duty)

Permissible temporary current boost 1.5 x In during 60 s (heavy duty)
1.1 x In during 60 s (normal duty)

Pollution degree 3

electrical connection Line side: M12 bar - 1 cables 3 x 185 mm² maximum per phase (normal duty)
Line side: M12 bar - 2 cables 3 x 120 mm² maximum per phase (normal duty)
Motor: M12 bar - 2 cables 3 x 185 mm² maximum per phase (normal duty)
Line side: M12 bar - 2 cables 3 x 70 mm² minimum per phase (heavy duty)
Line side: M12 bar - 1 cables 3 x 185 mm² maximum per phase (heavy duty)
Line side: M12 bar - 2 cables 3 x 120 mm² maximum per phase (heavy duty)
Motor: M12 bar - 2 cables 3 x 185 mm² maximum per phase (heavy duty)
Line side: M12 bar - 1 cables 3 x 185 mm² minimum per phase (normal duty)
Line side: M12 bar - 1 cables 3 x 185 mm² minimum per phase (heavy duty)
Line side: M12 bar - 2 cables 3 x 95 mm² minimum per phase (normal duty)
Motor: M12 bar - 1 cables 3 x 185 mm² minimum per phase (normal duty)
Motor: M12 bar - 2 cables 3 x 95 mm² minimum per phase (normal duty)
Motor: M12 bar - 1 cables 3 x 150 mm² minimum per phase (heavy duty)
Motor: M12 bar - 2 cables 3 x 70 mm² minimum per phase (heavy duty)
Control: removable screw terminals 0.5...1.5 mm²

linearity error AO1, AO2: +/- 0.2 % for analog output
AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input

Network number of phases 3 phases

nominal switching frequency 2.5 kHz

Enclosure mounting Floor-standing

maximum output frequency 500 kHz

Exchange mode Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP

Input compatibility DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
DI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2

Product destination Asynchronous motors
Synchronous motors

Maximum input current 369.0 A

Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27

Method of access Slave Modbus TCP

synchronous motor control profile Synchronous reluctance motor
Permanent magnet motor

Supply frequency 50...60 Hz - 5...5 %

apparent power 243 kVA at 440 V (normal duty)
200 kVA at 440 V (heavy duty)

number of addresses 1…247 for Modbus serial

Supply Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection

variable speed drive application selection Food and beverage processing other application
Mining mineral and metal fan
Mining mineral and metal pump
Oil and gas fan
Water and waste water other application
Building - HVAC screw compressor
Food and beverage processing pump
Food and beverage processing fan
Food and beverage processing atomization
Oil and gas electro submersible pump (ESP)
Oil and gas water injection pump
Oil and gas jet fuel pump
Oil and gas compressor for refinery
Water and waste water centrifuge pump
Water and waste water positive displacement pump
Water and waste water electro submersible pump (ESP)
Water and waste water screw pump
Water and waste water lobe compressor
Water and waste water screw compressor
Water and waste water compressor centrifugal
Water and waste water fan
Water and waste water conveyor
Water and waste water mixer
Building - HVAC compressor centrifugal

acceleration and deceleration ramps Linear adjustable separately from 0.01...9999 s

Protection type Safe torque off: motor
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive
Thermal protection: motor

Option card Slot A: communication module, PROFINET
Slot A: communication module, DeviceNet
Slot A: communication module, Modbus TCP/EtherNet/IP
Slot A: communication module, CANopen daisy chain RJ45
Slot A: communication module, CANopen SUB-D 9
Slot A: communication module, CANopen screw terminals
Slot A/slot B: digital and analog I/O extension module
Slot A/slot B: output relay extension module
Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link
Communication module, BACnet MS/TP
Communication module, Ethernet Powerlink
Slot A: communication module, Profibus DP V1

relay output type Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles

Transmission rate 10, 100 Mbits
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps

Type of cooling Forced convection

frequency resolution Analog input: 0.012/50 Hz
Display unit: 0.1 Hz

Prospective line isc 50 kA

transmission frame RTU

Relay output number 3

Sampling duration 5 ms +/- 1 ms (DI5, DI6) - discrete input
5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input
10 ms +/- 1 ms (AO1) - analog output
2 ms +/- 0.5 ms (DI1...DI4) - discrete input

Speed drive output frequency 0.1…500 Hz

Type of polarization No impedance

Volume of cooling air 1300 m3/h

Environment

Ambient air temp for storage/transportation -40…70 °C

ip degree of protection IP54 conforming to IEC 60529
IP54 conforming to IEC 61800-5-1

operating altitude 1000...4800 m with current derating 1 % per 100 m
<= 1000 m without derating

Range of product Altivar Process ATV600

ambient air temperature for operation 40…50 °C (with derating factor)
-15…40 °C (without derating)

electromagnetic compatibility Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2

overvoltage category III

standards EN/IEC 61800-3
EN/IEC 61800-3 environment 2 category C3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1
UL 508C

relative humidity 5…95 % without condensation conforming to IEC 60068-2-3

Maximum thdi <48 % full load conforming to IEC 61000-3-12

Regulation loop Adjustable PID regulator

vibration resistance 1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6

insulation resistance > 1 MOhm 500 V DC for 1 minute to earth