ATV630U40Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 4kW/5 hp, 500V/690 V, IP00 - Schneider Electric
2.2 kW at 500 V (heavy duty)
4 kW at 690 V (normal duty)
3 kW at 690 V (heavy duty)
+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
UL
TÜV
AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits
AI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
Constant torque standard
Optimized torque mode
Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)
Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits
Software-configurable current DQ-, DQ+: 30 V DC
Software-configurable current DQ-, DQ+: 100 mA
4...8 kHz with derating factor
3 LEDs (dual colour) for embedded communication status
4 LEDs (dual colour) for communication module status
1 LED (red) for presence of voltage
Can be suppressed
Adjustable
Not available in permanent magnet motor law
2-wire RS 485
Relay outputs R1A, R1B, R1C 30 V DC 3000 mA
Relay outputs R2A, R2C 250 V AC 5000 mA
Relay outputs R2A, R2C 30 V DC 5000 mA
Relay outputs R3A, R3C 250 V AC 5000 mA
Relay outputs R3A, R3C 30 V DC 5000 mA
Modbus serial
Ethernet
5 hp at 690 V normal duty
RJ45 (on the remote graphic terminal) for Modbus serial
6.1 A at 690 V (normal duty)
4.7 A at 500 V (heavy duty)
4.8 A at 690 V (heavy duty)
Forced convection: 75 W at 500 V, switching frequency 4 kHz
5.4 A at 4 kHz for normal duty
5.9 A during 60 s (normal duty)
1.5 x In during 60 s (heavy duty)
Motor: screw terminal 4...10 mm²/AWG 12...AWG 8
Line side: screw terminal 4...10 mm²/AWG 12...AWG 8
AO1, AO2: +/- 0.2 % for analog output
DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
Synchronous motors
Synchronous reluctance motor
5.7 kVA at 690 V (heavy duty)
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
S, U or customized
Safe torque off: motor
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive
Slot A: communication module, PROFINET
Slot A: communication module, DeviceNet
Slot A: communication module, Modbus TCP/EtherNet/IP
Slot A: communication module, CANopen daisy chain RJ45
Slot A: communication module, CANopen SUB-D 9
Slot A: communication module, CANopen screw terminals
Slot A/slot B: digital and analog I/O extension module
Slot A/slot B: output relay extension module
Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link
Communication module, BACnet MS/TP
Communication module, Ethernet Powerlink
Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
Analog input: 0.012/50 Hz
5 ms +/- 1 ms (DI5, DI6) - discrete input
5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input
10 ms +/- 1 ms (AO1) - analog output
IP00 conforming to IEC 60529
IP20 (with kit VW3A9705) conforming to IEC 61800-5-1
IP20 (with kit VW3A9705) conforming to IEC 60529
1000...4800 m with current derating 1 % per 100 m
50…60 °C (with derating factor)
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
EN/IEC 61800-3
EN/IEC 61800-3 environment 2 category C3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1
1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
The ATV630U40Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 4kW/5 hp, 500V/690 V, IP00 is devised to match the necessities of technical experts, such as electrical contractors, circuit experts, repair companies, and primary equipment suppliers. ATV630U40Y6 affords exceptional integrity and value for consultants in the power systems industry. This Variable speed drive, Altivar Process ATV600, ATV630, 4kW/5 hp, 500V/690 V, IP00 and other Altivar 630 from Schneider Electric are available the best price and procurement time through BaltElec, a reliable supplier attending to practitioners in their purchasing needs.
Clients who have used Schneider Electric Altivar 630 have consistently approved the producer's resilience. It has been outlined that the superior effectiveness of ATV630U40Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 4kW/5 hp, 500V/690 V, IP00 extends to a collection of deployments. Its first-rate traits make it perfect choice for various requirements, guaranteeing the success of your industrial, tertiary, and automation contracts.
Our team devotes in addressing industrial and tertiary professionals’ needs. We recognize the distinct standards and expectations of our partners in the realm. By aligning with our company, your business get access to the best charges and stock of top-tier products like ATV630U40Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 4kW/5 hp, 500V/690 V, IP00 from Schneider Electric at an affordable price. Professional buyers with Baltelec account appreciate additional savings and top-tier service.
Seize the moment and order ATV630U40Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 4kW/5 hp, 500V/690 V, IP00 at our dependable and efficient online store. Don't delay in making this prudent option that guarantees the finest quality and addresses the distinct prerequisites of contractors like your team.
When you have any inquiries or concerns about ATV630U40Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 4kW/5 hp, 500V/690 V, IP00 or any other Schneider Electric products, communicate with us or refer to our Support section section below. We have collected answers to habitual questions to help you further in making an smart decision about industrial and tertiary electrical components.
Remember, ATV630U40Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 4kW/5 hp, 500V/690 V, IP00 from Schneider Electric is secure, economical, and exceptional to alternative suppliers in the Altivar 630 category. Make it a part of your infrastructure now. Purchase at BALTELEC, your consistent provider for all your professional electrical equipment and automation needs.
In our Baltelec.eu web store you will find Variable speed drive, Altivar Process ATV600, ATV630, 4kW/5 hp, 500V/690 V, IP00 - ATV630U40Y6 worth 1,869.36 €, which will be a sure and up-to-date solution for your requirements. This goods is designed by the Schneider Electric brand using the up-to-the-minute technologies and aligns with the maximum standards of safety and efficiency. We offer goods from the Altivar 630 category that amalgamate robustness and functionality, which is an fine possibility for various functions. Independent of whether you demand machinery for small fabrication or for professional industrial implementation, Variable speed drive, Altivar Process ATV600, ATV630, 4kW/5 hp, 500V/690 V, IP00 will be a sure aid in your assignment.
Baltelec efforts to make the shopping process as simple and fast as feasible for our clients. We offer detailed portrayals and high-quality depictions of Variable speed drive, Altivar Process ATV600, ATV630, 4kW/5 hp, 500V/690 V, IP00 so that you can make an conscious choice. A team of specialists is always ready to help you with any matter in the Altivar 630 section related to the selection and use of materials. We are sure that Variable speed drive, Altivar Process ATV600, ATV630, 4kW/5 hp, 500V/690 V, IP00 will meet your demands and become an indispensable element of your tools for just 1,869.36 €.
Popular Questions about Schneider Electric ATV630U40Y6:
-
Why should I buy Schneider Electric ATV630U40Y6 from baltelec.eu?
When you order ATV630U40Y6 from Baltelec website, you receive original quality Schneider Electric Altivar 630 products at the most favorable cost and turnaround time. Furthermore, registered professionalsget additional savings and first-class attention.
-
How do I know if ATV630U40Y6 is the right choice for my technical requirements?
To verify that Schneider Electric ATV630U40Y6 is appropriate for your application, we offer comprehensive details concerning product's technical specifications, features, and applicable standards. You can find this information on the specific page of the item model. If you seek more guidance, our support team representative is available to assist you in reaching an well-informed choice.
-
What warranty coverage is offered for Schneider Electric Variable speed drive, Altivar Process ATV600, ATV630, 4kW/5 hp, 500V/690 V, IP00?
BALTELEC emphasizes the reliability of the items we sell. The regular guarantee coverage for Schneider Electric Altivar 630 including Schneider Electric Variable speed drive, Altivar Process ATV600, ATV630, 4kW/5 hp, 500V/690 V, IP00 is 12 months. Nevertheless, it varies depending on the particular item, category, and might be extended. You can locate comprehensive guarantee information on the Schneider Electric Variable speed drive, Altivar Process ATV600, ATV630, 4kW/5 hp, 500V/690 V, IP00 dedicated page or by contacting our customer service representatives.
-
Can you offer international shipping for ATV630U40Y6 including other Schneider Electric products?
Yes. In addition to catering to Estonia, Latvia, Lithuania and other European Union countries, we provide worldwide shipping for ATV630U40Y6. Please be aware that shipping options, fees, and shipping times may differ based on the destination. For bulk inquiries, please consult BALTELEC sales representatives.
-
Do Schneider Electric MBC provided by Baltelec.eu adhere to global standards for safety and reliability?
Yes. All Schneider Electric products provided at Baltelec.eu web store meet international standards such as IEC 60898-1 standard and carry the CE mark. These norms guarantee that the products meet strict security, technical, dependability, and performance criteria.
-
Can BaltElec offer assistance on incorporating renewable energy solutions, such as solar energy systems or wind energy converters, into my projects?
Definitely! Baltelec online store understands the significance of renewable energy integration within community. Our group of experts can support you in selecting the appropriate Schneider Electric items, to incorporate them into your renewable energy solutions}. We can provide advice on combining solar power systems, wind energy converters, and alternative eco-friendly options to optimize power generation and efficiency.
-
Do you have energy-efficient options available within the Altivar 630 category to promote energy conservation efforts?
Certainly! Baltelec.eu online store provides a wide range of eco-friendly solutions within the Altivar 630 category that are in line with green energy initiatives. Our brand's Schneider Electric products, like the ATV630U40Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 4kW/5 hp, 500V/690 V, IP00, are crafted with energy efficiency in mind. By integrating these products into your electrical system, you can optimize energy usage and minimize environmental impact. Additionally, we present attractive pricing for our energy-efficient Schneider Electric products,, making them an cost-effective choice for advocating sustainability.
-
Is Variable speed drive, Altivar Process ATV600, ATV630, 4kW/5 hp, 500V/690 V, IP00 sold by BALTELEC original?
Indeed, we exclusively offer authentic Schneider Electric products, including ATV630U40Y6. We source our products only through authorized distribution channels to guarantee their genuineness and excellent performance.
