ATV630U30Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00 - Schneider Electric
1.5 kW at 500 V (heavy duty)
3 kW at 690 V (normal duty)
2.2 kW at 690 V (heavy duty)
+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
UL
TÜV
AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits
AI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
Constant torque standard
Optimized torque mode
Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)
Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits
Software-configurable current DQ-, DQ+: 30 V DC
Software-configurable current DQ-, DQ+: 100 mA
4...8 kHz with derating factor
3 LEDs (dual colour) for embedded communication status
4 LEDs (dual colour) for communication module status
1 LED (red) for presence of voltage
Adjustable
Automatic whatever the load
Not available in permanent magnet motor law
2-wire RS 485
Relay outputs R1A, R1B, R1C 30 V DC 3000 mA
Relay outputs R2A, R2C 250 V AC 5000 mA
Relay outputs R2A, R2C 30 V DC 5000 mA
Relay outputs R3A, R3C 250 V AC 5000 mA
Relay outputs R3A, R3C 30 V DC 5000 mA
Ethernet
Modbus serial
2 hp at 500 V heavy duty
3 hp at 690 V heavy duty
RJ45 (on the remote graphic terminal) for Modbus serial
4.8 A at 690 V (normal duty)
3.4 A at 500 V (heavy duty)
3.6 A at 690 V (heavy duty)
Forced convection: 58 W at 500 V, switching frequency 4 kHz
3.1 A at 4 kHz for heavy duty
4.7 A during 60 s (heavy duty)
1.5 x In during 60 s (heavy duty)
Motor: screw terminal 4...10 mm²/AWG 12...AWG 8
Line side: screw terminal 4...10 mm²/AWG 12...AWG 8
AO1, AO2: +/- 0.2 % for analog output
DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
Synchronous motors
Synchronous reluctance motor
4.3 kVA at 690 V (heavy duty)
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
S, U or customized
Safe torque off: motor
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive
Slot A: communication module, PROFINET
Slot A: communication module, DeviceNet
Slot A: communication module, Modbus TCP/EtherNet/IP
Slot A: communication module, CANopen daisy chain RJ45
Slot A: communication module, CANopen SUB-D 9
Slot A: communication module, CANopen screw terminals
Slot A/slot B: digital and analog I/O extension module
Slot A/slot B: output relay extension module
Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link
Communication module, BACnet MS/TP
Communication module, Ethernet Powerlink
Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
Analog input: 0.012/50 Hz
5 ms +/- 1 ms (DI5, DI6) - discrete input
5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input
10 ms +/- 1 ms (AO1) - analog output
IP00 conforming to IEC 60529
IP20 (with kit VW3A9705) conforming to IEC 61800-5-1
IP20 (with kit VW3A9705) conforming to IEC 60529
1000...4800 m with current derating 1 % per 100 m
50…60 °C (with derating factor)
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
EN/IEC 61800-3
EN/IEC 61800-3 environment 2 category C3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1
1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
The ATV630U30Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00 is conceived to match the wants of sector experts, such as electrical contractors, circuit experts, service organizations, and industry fabricators. ATV630U30Y6 provides outstanding performance and asset for professionals in the electrotechnical industry. This Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00 and other Altivar 630 from Schneider Electric can be acquired at the lowest cost and shipping time through BaltElec website, a credible vendor attending to industry experts in their procurement needs.
Contractors who have chosen Schneider Electric Altivar 630 have repeatedly approved the maker's solidity. It has been outlined that the impressive functionality of ATV630U30Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00 extends to a diverse range of applications. Its first-rate properties make it right choice for different applications, assuring the success of your industrial, tertiary, and automation ventures.
Our specialists focuses in addressing industrial and tertiary professionals’ needs. We recognize the special expectations and preferences of our partners in the realm. By collaborating with our professionals, your business access access to the top rates and stock of superior products like ATV630U30Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00 from Schneider Electric at a reasonable price. Registered users appreciate special savings and dedicated support.
Do not hesitate and purchase ATV630U30Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00 at our safe and convenient webshop. Don't delay in making this wise action that validates the utmost quality and achieves the specific requirements of buyers like your team.
If there are any doubts or concerns about ATV630U30Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00 or any other Schneider Electric products, contact us or refer to our Help section section below. We have put together answers to habitual issues to serve you further in making an enlightened decision about industrial and tertiary electrical components.
Remember, ATV630U30Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00 from Schneider Electric is credible, economical, and first-rate to other producers in the Altivar 630 category. Don't hesitate to make it a part of your apparatus at once. Buy at baltele.eu, your faithful dealer for all your Schneider Electric.
In our Baltelec.eu dot-com store you will locate Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00 - ATV630U30Y6 worth 1,708.82 €, which will be a trustworthy and current solution for your wishes. This produce is invented by the Schneider Electric brand using the state-of-the-art technologies and satisfies the pinnacle standards of precaution and productivity. We give products from the Altivar 630 category that combine toughness and practicality, which is an fine preference for various functions. In defiance of whether you desire appliances for small fabrication or for specialized industrial operation, Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00 will be a safe associate in your undertaking.
Baltelec strives to make the buying process as easy and fast as workable for our customers. We offer detailed narratives and high-quality photographs of Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00 so that you can make an conscious choice. A team of virtuosos is always ready to help you with any matter in the Altivar 630 section affiliated to the nomination and use of supplies. We are trusting that Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00 will meet your criteria and become an imperative element of your kit for just 1,708.82 €.
What People Ask about Schneider Electric ATV630U30Y6:
-
Why should I order ATV630U30Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00 from Baltelec website?
When you buy Schneider Electric Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00 from BALTELEC, you receive genuine high-quality Schneider Electric Altivar 630 products at competitive prices and lead time. Moreover, loyal buyersreceive further discounts and expedited requests handling.
-
How I make sure whether Schneider Electric ATV630U30Y6 suits for my technical requirements?
To make sure that ATV630U30Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00 is appropriate for your drawings, we provide thorough details concerning product's specs, features, and compatibility. You can find this data on the dedicated page of the device model. If you seek more guidance, our customer support team is prepared to aid you in making an informed decision.
-
What guarantee coverage is offered for ATV630U30Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00?
BaltElec emphasizes the quality of the products we deliver. The standard warranty coverage for Schneider Electric Altivar 630 including ATV630U30Y6 is 1 year. Nonetheless, it varies according to the specific product, product category, and might be extended. You can locate detailed guarantee details on the ATV630U30Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00 product page or by getting in touch with our support team team.
-
Do you offer international shipping for Schneider Electric ATV630U30Y6 including other Schneider Electric products?
Yes. Besides serving Estonia, Latvia, Lithuania and other European Union countries, we offer global shipping for Schneider Electric Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00. Please keep in mind that shipping options, costs, and delivery times may vary based on the shipping location. In the case of complicated acquisitions, kindly contact BALTELEC sales representatives.
-
Do Schneider Electric MBC provided by BaltElec meet global norms for security and quality?
Certainly. All Schneider Electric products provided at Baltelec web store adhere to international norms such as IEC 60898-1 and carry the CE certification. Such standards assure that the products fulfill rigorous safety, technical, dependability, and functional criteria.
-
Can Baltelec.eu provide guidance on incorporating renewable energy solutions, such as solar energy systems or wind energy converters, into my projects?
Yes, sure! Baltelec.eu website understands the significance of sustainable energy integration within community. Our team of professionals can support you in selecting the suitable Schneider Electric products, to incorporate them into your renewable energy projects}. We can offer guidance on combining solar energy systems, wind energy converters, and alternative eco-friendly options to optimize energy generation and effectiveness.
-
Are there green options offered within the Altivar 630 category to encourage energy conservation efforts?
Certainly! Baltelec.eu online store offers numerous green solutions within the Altivar 630 category that align with environmental sustainability objectives. Our brand's Schneider Electric products, including the Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00, are engineered with energy conservation in mind. By integrating these products into your electrical system, you can enhance energy usage and minimize environmental impact. Additionally, we present affordable pricing for our green Schneider Electric products,, making them an budget-friendly choice for supporting sustainability.
-
Is ATV630U30Y6 offered by Baltelec online store genuine?
Absolutely, we exclusively offer genuine Schneider Electric products, such as Variable speed drive, Altivar Process ATV600, ATV630, 3 kW, 500V/690 V, IP00. We procure our products exclusively through official distribution channels to ensure their legitimacy and superior standards.
