ATV630U15M3 - Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 - Schneider Electric
0.75 kW (heavy duty)
+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
CSA
TÜV
ATEX zone 2/22
DNV-GL
UL
AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits
AI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
Variable torque standard
Optimized torque mode
Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)
Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits
Software-configurable current DQ-, DQ+: 30 V DC
Software-configurable current DQ-, DQ+: 100 mA
4...12 kHz with derating factor
3 LEDs (dual colour) for embedded communication status
4 LEDs (dual colour) for communication module status
1 LED (red) for presence of voltage
Can be suppressed
Adjustable
Not available in permanent magnet motor law
2-wire RS 485
Relay outputs R1A, R1B, R1C 30 V DC 3000 mA
Relay outputs R2A, R2C 250 V AC 5000 mA
Relay outputs R2A, R2C 30 V DC 5000 mA
Relay outputs R3A, R3C 250 V AC 5000 mA
Relay outputs R3A, R3C 30 V DC 5000 mA
Ethernet
Modbus TCP
1 hp heavy duty
RJ45 (on the remote graphic terminal) for Modbus serial
5 A at 240 V (normal duty)
3.3 A at 200 V (heavy duty)
3 A at 240 V (heavy duty)
Forced convection: 53 W at 200 V, switching frequency 4 kHz
4.6 A at 4 kHz for heavy duty
6.9 A during 60 s (heavy duty)
1.5 x In during 60 s (heavy duty)
Motor: screw terminal 2.5...6 mm²/AWG 14...AWG 10
Line side: screw terminal 2.5...6 mm²/AWG 14...AWG 10
AO1, AO2: +/- 0.2 % for analog output
DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
Synchronous motors
Synchronous reluctance motor
1.2 kVA at 240 V (heavy duty)
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
Food and beverage processing other application
Mining mineral and metal fan
Mining mineral and metal pump
Oil and gas fan
Water and waste water other application
Building - HVAC screw compressor
Food and beverage processing pump
Food and beverage processing fan
Food and beverage processing atomization
Oil and gas electro submersible pump (ESP)
Oil and gas water injection pump
Oil and gas jet fuel pump
Oil and gas compressor for refinery
Water and waste water centrifuge pump
Water and waste water positive displacement pump
Water and waste water electro submersible pump (ESP)
Water and waste water screw pump
Water and waste water lobe compressor
Water and waste water screw compressor
Water and waste water compressor centrifugal
Water and waste water fan
Water and waste water conveyor
Water and waste water mixer
Safe torque off: motor
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive
Slot A: communication module, PROFINET
Slot A: communication module, DeviceNet
Slot A: communication module, Modbus TCP/EtherNet/IP
Slot A: communication module, CANopen daisy chain RJ45
Slot A: communication module, CANopen SUB-D 9
Slot A: communication module, CANopen screw terminals
Slot A/slot B: digital and analog I/O extension module
Slot A/slot B: output relay extension module
Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link
Communication module, BACnet MS/TP
Communication module, Ethernet Powerlink
Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
Analog input: 0.012/50 Hz
5 ms +/- 1 ms (DI5, DI6) - discrete input
5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input
10 ms +/- 1 ms (AO1) - analog output
IP21 conforming to IEC 60529
1000...4800 m with current derating 1 % per 100 m
50…60 °C (with derating factor)
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
EN/IEC 61800-3
EN/IEC 61800-3 environment 1 category C2
EN/IEC 61800-3 environment 2 category C3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1
1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
The ATV630U15M3 - Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 is conceived to cover the wants of professional buyers, such as installers, circuit experts, repair companies, and manufacturing originators. ATV630U15M3 furnishes excellent excellence and merit for designers in the electrotechnical industry. This Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 and other Altivar 630 from Schneider Electric can be bought at the most competitive price and lead time through BALTELEC website, a credible supplier helping experts in their gathering needs.
Technicians who have acquired Schneider Electric Altivar 630 have continuously acclaimed the producer's robustness. It has been emphasized that the impressive energy-efficiency of ATV630U15M3 - Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 extends to a extensive scope of operations. Its ideal traits make it optimal for wide-ranging specifications, ensuring your industrial, tertiary and automation projects success.
BALTELEC commits in serving industrial and tertiary professionals’ needs. We grasp the customized criteria and demands of our buyers in the industry. By teaming up with Baltelec team, you obtain access to the finest costs and inventory of premium products like ATV630U15M3 - Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 from Schneider Electric at a competitive price. Account holders receive added discounts and preferred assistance.
Take action and secure ATV630U15M3 - Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 at our protected and intuitive webshop. Don't delay in making this prudent selection that promises the supreme quality and meets the specific prerequisites of traders like your enterprise.
If you face any concerns or concerns about ATV630U15M3 - Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 or any other Schneider Electric products, drop us a line or refer to our Frequently Asked Questions section below. We have put together answers to recurring uncertainties to advise you further in making an well-informed decision about industrial and tertiary electrical components.
Remember, ATV630U15M3 - Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 from Schneider Electric is credible, value-priced, and high-quality to other vendors in the Altivar 630 category. Make it a part of your arrangement immediately. Order at Baltelec webstore, your preferred supplier for all your Altivar 630.
In our Baltelec.eu cyber store you will find Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 - ATV630U15M3 worth 671.19 €, which will be a safe and modern solution for your necessities. This article is constructed by the Schneider Electric brand using the latest technologies and conforms to the maximum standards of protection and workmanship. We supply commodities from the Altivar 630 category that merge resilience and efficacy, which is an superior alternative for various roles. In spite of whether you call for equipment for small manufacturing or for proficient industrial exploitation, Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 will be a secure aid in your assignment.
Baltelec efforts to make the shopping process as comfortable and fast as practicable for our patrons. We offer detailed depictions and high-quality portrayals of Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 so that you can make an conscious choice. A team of experts is always ready to help you with any uncertainties in the Altivar 630 section involved to the selection and use of items. We are positive that Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 will meet your demands and become an significant element of your apparatus for just 671.19 €.
Frequently Asked Questions about Schneider Electric Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1:
-
Why should I buy ATV630U15M3 - Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 from BALTELEC?
When you order Schneider Electric Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 from BaltElec, you obtain original quality Schneider Electric Altivar 630 products at affordable prices and delivery schedule. Additionally, registered professionalsreceive additional savings and preferred assistance.
-
Can you consult if ATV630U15M3 - Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 is the right choice for my technical requirements?
To confirm that Schneider Electric Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 matches your drawings, we provide detailed details concerning product's specifications, features, and interoperability. You can access this information on the product page of the product name. If you require more guidance, our customer support representative is available to assist you in reaching an informed choice.
-
Which warranty coverage is provided for ATV630U15M3 - Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1?
Baltelec team stands for the quality of the products we sell. The default guarantee coverage for Schneider Electric Altivar 630 including ATV630U15M3 is 12 months. Nonetheless, it depends depending on the specific product, category, and may even be longer. You can discover comprehensive warranty details on the Schneider Electric Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 dedicated page or by contacting our support team team.
-
Can you offer worldwide shipping for ATV630U15M3 - Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 including other Schneider Electric products?
Certainly. Apart from catering to Estonia, Latvia, Lithuania and other European Union countries, we offer international shipping for ATV630U15M3. Please note that shipping options, costs, and delivery schedule may differ based on the shipping location. In the case of complicated purchases, kindly contact BALTELEC sales representatives.
-
Do Schneider Electric MBC offered by BALTELEC adhere to global standards for safety and quality?
Of course. All Schneider Electric items available at Baltelec web store meet international norms such as IEC 60898-1 standard and carry the CE certification. Such norms ensure that the products fulfill strict security, technological, reliability, and functional requirements.
-
Can BALTELEC provide assistance on incorporating renewable energy solutions, such as solar energy systems or wind energy converters, into my projects?
Definitely! Baltelec online store acknowledges the importance of renewable energy integration within community. Our team of professionals can support you in selecting the right Schneider Electric products, to integrate them into your renewable energy solutions}. We can provide advice on combining solar energy systems, wind power converters, and alternative sustainable options to optimize power generation and efficiency.
-
Do you have green options offered within the Altivar 630 category to encourage green energy initiatives?
Definitely!Yes! Baltelec.eu online store offers a wide range of energy-efficient solutions within the Altivar 630 category that are aligned with energy-saving goals. Our Schneider Electric products, like the ATV630U15M3, are engineered with energy efficiency in mind. By integrating these products into your electrical system, you can enhance energy usage and lower environmental impact. Additionally, we provide affordable pricing for our energy-efficient Schneider Electric products,, making them an budget-friendly choice for advocating sustainability.
-
Are Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1 available by Baltelec online store legitimate?
Absolutely, we solely sell original Schneider Electric products, including but not limited to Variable speed drive, Altivar Process ATV600, ATV630, 1.5kW/2 hp, 200...240 V, IP21/UL type 1. We procure our products only through authorized distribution channels to ensure their legitimacy and high standards.
