ATV630D75Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00 - Schneider Electric
45 kW at 500 V (heavy duty)
75 kW at 690 V (normal duty)
55 kW at 690 V (heavy duty)
+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
UL
CSA
AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits
AI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
Constant torque standard
Variable torque standard
Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)
Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits
Software-configurable current DQ-, DQ+: 30 V DC
Software-configurable current DQ-, DQ+: 100 mA
2.5...4.9 kHz with derating factor
3 LEDs (dual colour) for embedded communication status
4 LEDs (dual colour) for communication module status
1 LED (red) for presence of voltage
Adjustable
Not available in permanent magnet motor law
Automatic whatever the load
2-wire RS 485
Relay outputs R1A, R1B, R1C 30 V DC 3000 mA
Relay outputs R2A, R2C 250 V AC 5000 mA
Relay outputs R2A, R2C 30 V DC 5000 mA
Relay outputs R3A, R3C 250 V AC 5000 mA
Relay outputs R3A, R3C 30 V DC 5000 mA
Modbus serial
Modbus TCP
60 hp at 500 V heavy duty
100 hp at 690 V normal duty
75 hp at 690 V heavy duty
RJ45 (on the remote graphic terminal) for Modbus serial
87.7 A at 690 V (normal duty)
71 A at 500 V (heavy duty)
68.5 A at 690 V (heavy duty)
Forced convection: 1075 W at 500 V, switching frequency 2.5 kHz
66 A at 2.5 kHz for heavy duty
99 A during 60 s (heavy duty)
1.5 x In during 60 s (heavy duty)
Line side: screw terminal 35...50 mm²/AWG 2...AWG 1
Motor: screw terminal 35...50 mm²/AWG 2...AWG 1
AO1, AO2: +/- 0.2 % for analog output
DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
Synchronous motors
Synchronous reluctance motor
81.9 kVA at 690 V (heavy duty)
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
Linear adjustable separately from 0.01...9999 s
Safe torque off: motor
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive
Slot A: communication module, PROFINET
Slot A: communication module, DeviceNet
Slot A: communication module, Modbus TCP/EtherNet/IP
Slot A: communication module, CANopen daisy chain RJ45
Slot A: communication module, CANopen SUB-D 9
Slot A: communication module, CANopen screw terminals
Slot A/slot B: digital and analog I/O extension module
Slot A/slot B: output relay extension module
Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link
Communication module, BACnet MS/TP
Communication module, Ethernet Powerlink
Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
Analog input: 0.012/50 Hz
5 ms +/- 1 ms (DI5, DI6) - discrete input
5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input
10 ms +/- 1 ms (AO1) - analog output
IP00 conforming to IEC 60529
IP20 (with kit VW3A9706) conforming to IEC 61800-5-1
IP20 (with kit VW3A9706) conforming to IEC 60529
1000...4800 m with current derating 1 % per 100 m
50…60 °C (with derating factor)
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
EN/IEC 61800-3
EN/IEC 61800-3 environment 2 category C3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1
1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
The ATV630D75Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00 is engineered to accommodate the prerequisites of professional buyers, such as switchgear manufacturers, electrical technicians, support service firms, and OEMs. ATV630D75Y6 provides impressive performance and utility for technicians in the electrical and automation industry. This Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00 and other Altivar 630 from Schneider Electric can be acquired the best price and fulfillment period through baltelec.eu, a trustworthy retailer serving industry experts in their supply needs.
Patrons who have bought Schneider Electric Altivar 630 have continuously appreciated the maker's sturdiness. It has been specified that the extraordinary energy-efficiency of ATV630D75Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00 extends to a broad spectrum of functions. Its top-notch properties make it proper pick for wide-ranging specifications, assuring the success of your industrial, tertiary, and automation ventures.
Our experts concentrates in meeting industrial and tertiary professionals’ needs. We comprehend the individual expectations and anticipations of our customers in the industry. By cooperating with BaltElec, your company get access to the optimal charges and lead time of premium products like ATV630D75Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00 from Schneider Electric at a reasonable price. Registered users take pleasure in extra discounts and priority service.
Move quickly and grab ATV630D75Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00 at our risk-free and easy-to-use website. Don't delay in making this clever plan that confirms the best quality and caters to the special standards of clients like your firm.
If there are any matters or concerns about ATV630D75Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00 or any other Schneider Electric products, get in touch with us or refer to our FAQ section section below. We have provided answers to habitual issues to assist you further in making an well-considered decision about industrial and tertiary electrical components.
Remember, ATV630D75Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00 from Schneider Electric is sure, inexpensive, and premier to opposing companies in the Altivar 630 category. Make it a part of your configuration without delay. Acquire at baltele.eu, your steady distributor for all your Altivar 630.
In our Baltelec.eu digital store you will detect Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00 - ATV630D75Y6 worth 8,235.37 €, which will be a faithful and current solution for your wants. This item is formulated by the Schneider Electric brand using the most recent technologies and obeys the maximum standards of safety and effectiveness. We present things from the Altivar 630 category that amalgamate strength and functionality, which is an premium possibility for various functions. Not minding of whether you desire appliances for small construction or for experienced industrial application, Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00 will be a sure adjunct in your task.
Baltelec strives to make the acquiring process as simple and fast as realizable for our buyers. We offer detailed summaries and high-quality depictions of Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00 so that you can make an aware choice. A team of virtuosos is always ready to help you with any issues in the Altivar 630 section connected to the preferment and use of commodities. We are certain that Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00 will meet your anticipations and become an needed element of your inventory for just 8,235.37 €.
FAQ about Schneider Electric Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00:
-
What are the benefits of purchasing Schneider Electric Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00 from baltelec.eu?
When ordering ATV630D75Y6 from BaltElec, you will receive genuine high-quality Schneider Electric Altivar 630 products at the most competitive prices and lead time. Moreover, our buyerstake pleasure in further discounts and preferred assistance.
-
Who can consult if Schneider Electric Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00 suits for my technical requirements?
To make sure that Schneider Electric ATV630D75Y6 matches your drawings, we offer comprehensive information concerning product's technical specifications, technical characteristics, and in some cases 3D models as well. You can access this information on the specific page of the product model. If you need additional help, our customer service representative stands ready to aid you in reaching an educated decision.
-
Which warranty coverage is offered for ATV630D75Y6 - Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00?
BaltElec online store emphasizes the quality of the products we distribute. The regular guarantee coverage for Schneider Electric Altivar 630 including Schneider Electric ATV630D75Y6 is 12 months. Nonetheless, it depends based on the individual item, product category, and might be longer. You can locate comprehensive warranty information on the ATV630D75Y6 dedicated page or by getting in touch with our customer support team.
-
Do you arrange international shipping for Schneider Electric Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00 including other Schneider Electric products?
Absolutely. Apart from catering to Estonia, Latvia, Lithuania and other European Union countries, we offer global shipping for Schneider Electric ATV630D75Y6. Please be aware that delivery options, costs, and delivery schedule might differ based on the shipping location. For complicated orders, please consult BaltElec sales staff.
-
Do Schneider Electric MBC offered by Baltelec.eu comply with international standards for security and reliability?
Completely. All Schneider Electric items offered at BALTELEC online store conform to international norms such as IEC 60898-1 standard and carry the CE mark. Such norms assure that the items fulfill strict safety, technical, reliability, and performance criteria.
-
Can BaltElec offer assistance on incorporating renewable energy solutions, such as solar power systems or wind power converters, into my projects?
Yes, sure! Baltelec.eu acknowledges the significance of sustainable energy incorporation within community. Our group of specialists can support you in choosing the suitable Schneider Electric products, to integrate them into your renewable energy projects}. We can offer recommendations on combining solar energy systems, wind energy converters, and other sustainable options to maximize energy generation and effectiveness.
-
Are there energy-efficient options offered within the Altivar 630 category to promote green energy initiatives?
Absolutely! Baltelec website provides numerous eco-friendly solutions in the category of Altivar 630 that are aligned with environmental sustainability objectives. Our brand's Schneider Electric products, such as the Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00, are crafted with environmental friendliness in mind. By using these products into your electrical system, you can maximize energy usage and minimize environmental impact. Additionally, we offer attractive pricing for our green Schneider Electric products,, making them an cost-effective choice for promoting sustainability.
-
Is ATV630D75Y6 offered by Baltelec.eu genuine?
Absolutely, we solely sell authentic Schneider Electric products, including but not limited to Variable speed drive, Altivar Process ATV600, ATV630, 75kW/100 hp, 500V/690 V, IP00. We source our products only through official distribution channels to guarantee their legitimacy and superior quality.
