ATV630C11N4F - Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21 - Schneider Electric
90 kW (heavy duty)
+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
CSA
ATEX zone 2/22
ATEX INERIS
RoHS
AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits
AI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
Variable torque standard
Constant torque standard
Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)
Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits
Software-configurable current DQ-, DQ+: 30 V DC
Software-configurable current DQ-, DQ+: 100 mA
2...8 kHz adjustable
3 LEDs (dual colour) for embedded communication status
4 LEDs (dual colour) for communication module status
1 LED (red) for presence of voltage
Adjustable
Not available in permanent magnet motor law
Can be suppressed
2-wire RS 485
Relay outputs R1A, R1B, R1C 30 V DC 3000 mA
Relay outputs R2A, R2C 250 V AC 5000 mA
Relay outputs R2A, R2C 30 V DC 5000 mA
Relay outputs R3A, R3C 250 V AC 5000 mA
Relay outputs R3A, R3C 30 V DC 5000 mA
Ethernet
Modbus serial
RJ45 (on the remote graphic terminal) for Modbus serial
151 A at 400 V (heavy duty)
207 A at 380 V (normal duty)
174 A at 380 V (heavy duty)
2010 W, switching frequency 2.5 kHz (heavy duty)
173 A at 2.5 kHz for heavy duty
260 A during 60 s (heavy duty)
1.5 x In during 60 s (heavy duty)
Line side: M12 bar - 1 cables 3 x 150 mm² minimum per phase (normal duty)
Line side: M12 bar - 2 cables 3 x 70 mm² minimum per phase (normal duty)
Line side: M12 bar - 1 cables 3 x 185 mm² maximum per phase (normal duty)
Line side: M12 bar - 2 cables 3 x 120 mm² maximum per phase (normal duty)
Motor: M12 bar - 1 cables 3 x 120 mm² minimum per phase (normal duty)
Motor: M12 bar - 2 cables 3 x 50 mm² minimum per phase (normal duty)
Motor: M12 bar - 2 cables 3 x 185 mm² maximum per phase (normal duty)
Line side: M12 bar - 1 cables 3 x 150 mm² minimum per phase (heavy duty)
Line side: M12 bar - 2 cables 3 x 70 mm² minimum per phase (heavy duty)
Line side: M12 bar - 1 cables 3 x 185 mm² maximum per phase (heavy duty)
Line side: M12 bar - 2 cables 3 x 120 mm² maximum per phase (heavy duty)
Motor: M12 bar - 1 cables 3 x 95 mm² minimum per phase (heavy duty)
Motor: M12 bar - 2 cables 3 x 185 mm² maximum per phase (heavy duty)
AO1, AO2: +/- 0.2 % for analog output
DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
Synchronous motors
Synchronous reluctance motor
115 kVA at 440 V (heavy duty)
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
Food and beverage processing other application
Mining mineral and metal fan
Mining mineral and metal pump
Oil and gas fan
Water and waste water other application
Building - HVAC screw compressor
Food and beverage processing pump
Food and beverage processing fan
Food and beverage processing atomization
Oil and gas electro submersible pump (ESP)
Oil and gas water injection pump
Oil and gas jet fuel pump
Oil and gas compressor for refinery
Water and waste water centrifuge pump
Water and waste water positive displacement pump
Water and waste water electro submersible pump (ESP)
Water and waste water screw pump
Water and waste water lobe compressor
Water and waste water screw compressor
Water and waste water compressor centrifugal
Water and waste water fan
Water and waste water conveyor
Water and waste water mixer
Safe torque off: motor
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive
Slot A: communication module, PROFINET
Slot A: communication module, DeviceNet
Slot A: communication module, Modbus TCP/EtherNet/IP
Slot A: communication module, CANopen daisy chain RJ45
Slot A: communication module, CANopen SUB-D 9
Slot A: communication module, CANopen screw terminals
Slot A/slot B: digital and analog I/O extension module
Slot A/slot B: output relay extension module
Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link
Communication module, BACnet MS/TP
Communication module, Ethernet Powerlink
Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
Analog input: 0.012/50 Hz
5 ms +/- 1 ms (DI5, DI6) - discrete input
5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input
10 ms +/- 1 ms (AO1) - analog output
IP21 conforming to IEC 60529
1000...4800 m with current derating 1 % per 100 m
40…50 °C (with derating factor)
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
EN/IEC 61800-3
EN/IEC 61800-3 environment 2 category C3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1
1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
The ATV630C11N4F - Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21 is conceived to meet the needs of trade buyers, such as electrical installers, electrical fitters, facility upkeep providers, and original manufacturers. ATV630C11N4F dispenses impressive reliability and value for developers in the electrotechnical industry. This Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21 and other Altivar 630 from Schneider Electric can be obtained at the optimal price and delivery schedule through BALTELEC online store, a well-known reseller catering to experts in their gathering needs.
Patrons who have secured Schneider Electric Altivar 630 have regularly praised the brand's reliability. It has been highlighted that the excellent capability of ATV630C11N4F - Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21 extends to a multitude of operations. Its supreme characteristics make it suitable for assorted uses, promoting success in your industrial, tertiary, and automation efforts.
Our company dedicates in fulfilling industrial and tertiary professionals’ needs. We understand the special expectations and expectations of our clients in the industry. By teaming up with our company, our partners get access to the top costs and supply timeline of superior products like ATV630C11N4F - Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21 from Schneider Electric at an economical price. Baltelec account members benefit from special savings and priority service.
Start immediately and procure ATV630C11N4F - Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21 at our dependable and efficient digital marketplace. Don't delay in making this shrewd pick that secures the best quality and addresses the specific needs of contractors like your company.
If there are any problems or concerns about ATV630C11N4F - Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21 or any other Schneider Electric products, communicate with us or refer to our Assistance center section below. We have put together answers to popular issues to aid you further in making an thoughtful decision about industrial and tertiary electrical components.
Remember, ATV630C11N4F - Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21 from Schneider Electric is reliable, thrifty, and top-notch to industry peers in the Altivar 630 category. Don't hesitate to make it a part of your configuration now. Order at BALTELEC, your esteemed seller for all your Schneider Electric.
In our Baltelec.eu online store you will uncover Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21 - ATV630C11N4F worth 11,519.81 €, which will be a secure and contemporary solution for your necessities. This item is developed by the Schneider Electric brand using the modern technologies and adheres to the pinnacle standards of precaution and capacity. We extend produce from the Altivar 630 category that combine lastingness and practicality, which is an fine choice for various intents. Without consideration of whether you call for machinery for small production or for experienced industrial implementation, Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21 will be a reliable associate in your project.
Baltelec aims to make the purchasing process as convenient and fast as possible for our patrons. We offer detailed summaries and high-quality shots of Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21 so that you can make an aware choice. A team of virtuosos is always ready to help you with any enquiries in the Altivar 630 section involved to the choice and use of equipment. We are certain that Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21 will meet your hopes and become an indispensable element of your equipment for just 11,519.81 €.
FAQ about Schneider Electric ATV630C11N4F:
-
What are the benefits of ordering Schneider Electric ATV630C11N4F from BaltElec?
When your purchase ATV630C11N4F - Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21 from baltelec.eu, you obtain authentic quality Schneider Electric Altivar 630 products at affordable prices and turnaround time. Moreover, our buyersget additional savings and preferred assistance.
-
Can Baltelec consult if ATV630C11N4F is appropriate for my needs?
To verify that Schneider Electric ATV630C11N4F meets the requirements of your drawings, we provide thorough information concerning product's specifications, features, and in some cases 3D models as well. You can find this data on the specific page of the item name. If you need additional help, our customer support representative is prepared to aid you in reaching an well-informed choice.
-
Which warranty coverage is provided for Schneider Electric Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21?
BaltElec online store emphasizes the reliability of the products we sell. The standard warranty coverage for Schneider Electric Altivar 630 including Schneider Electric Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21 is 1 year. Nonetheless, it depends depending on the particular item, product category, and could be extended. You can discover specific guarantee details on the Schneider Electric Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21 dedicated page or by getting in touch with our customer service team.
-
Do you arrange global shipping for ATV630C11N4F - Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21 as well as other Schneider Electric items?
Absolutely. In addition to catering to Estonia, Latvia, Lithuania and other European Union countries, we provide worldwide shipping for Schneider Electric Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21. Please be aware that shipping options, costs, and delivery schedule can vary depending on the destination. In the case of volume orders, feel free to reach out to BaltElec sales representatives.
-
Do Schneider Electric MBC provided by Baltelec.eu comply with international norms for security and quality?
Completely. All Schneider Electric items provided at Baltelec online store adhere to global standards such as IEC 60898-1 and carry the CE mark. These standards assure that the products meet rigorous safety, technological, dependability, and performance criteria.
-
Can BALTELEC offer guidance on integrating renewable energy solutions, such as solar power systems or wind power converters, into my projects?
Absolutely! BaltElec understands the significance of sustainable energy incorporation within community. Our team of specialists can assist you in choosing the right Schneider Electric products, to integrate them into your renewable energy solutions}. We can provide recommendations on combining solar energy systems, wind power converters, and alternative eco-friendly options to maximize power generation and efficiency.
-
Do you have green options offered within the Altivar 630 category to encourage green energy initiatives?
Certainly! Baltelec.eu online store offers numerous green solutions in the category of Altivar 630 that are aligned with environmental sustainability objectives. Our top-quality Schneider Electric products, such as the Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21, are designed with environmental friendliness in mind. By using these products into your electrical system, you can enhance energy usage and reduce environmental impact. Additionally, we present affordable pricing for our energy-efficient Schneider Electric products,, making them an economical choice for supporting sustainability.
-
Is Variable speed drive, Altivar Process ATV600, ATV630, 110 kW, 380...440 V, IP21 sold by BaltElec e-shop authentic?
Yes, we solely provide original Schneider Electric products, including but not limited to ATV630C11N4F. We source our products only through legitimate distribution channels to ensure their authenticity and high performance.
