ATV320U75N4WS - Variable speed drive, Altivar Machine ATV320, 7.5 kW, 380...500 V, 3 phases, enclosed, IP65 - Schneider Electric

Expected in 2-4 weeks

1 642,80 € excl. VAT

2 004,21 € incl. VAT

Text About:

Variable speed drive, Altivar Machine ATV320, 7.5 kW, 380...500 V, 3 phases, enclosed, IP65 - Schneider Electric

In cart

2 004,21 €

SPECIFICATIONS

Main

Format of the drive Enclosed

product specific application Complex machines

emc filter Class C2 EMC filter integrated

motor power kW 7.5 kW for heavy duty

variant With disconnect switch

Complementary

4 quadrant operation possible True

with safety function safe brake management (sbc/sbt) False

maximum switching current Relay output R1A, R1B, R1C on resistive load, cos phi = 1: 3 A at 250 V AC
Relay output R1A, R1B, R1C on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Relay output R2A, R2C on resistive load, cos phi = 1: 5 A at 250 V AC
Relay output R2A, R2C on resistive load, cos phi = 1: 5 A at 30 V DC

Product certifications CE
ATEX
NOM
GOST
EAC
RCM
KC

with safety function safe operating stop (sos) False

Handle front plate colour 521 mm

Product or component type Variable speed drive

[us] rated supply voltage 380...500 V - 15...10 %

with safety function safe programmable logic False

minimum switching current Relay output R1A, R1B, R1C, R2A, R2C: 5 mA at 24 V DC

marking CE
ATEX
UL
CSA
EAC
RCM

with safety function safe stop 1 (ss1) True

Analogue input number 3

Analogue input type AI1 voltage: 0...10 V DC, impedance: 30 kOhm, resolution 10 bits
AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30 kOhm, resolution 10 bits
AI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits

Analogue output number 1

Asynchronous motor control profile Voltage/frequency ratio, 5 points
Flux vector control without sensor, standard
Voltage/frequency ratio - Energy Saving, quadratic U/f
Flux vector control without sensor - Energy Saving
Voltage/frequency ratio, 2 points

Discrete input logic Positive logic (source)
Negative logic (sink)

width (w) 320 mm

Analogue output type Software-configurable current AQ1: 0...20 mA impedance 800 Ohm, resolution 10 bits
Software-configurable voltage AQ1: 0...10 V DC impedance 470 Ohm, resolution 10 bits

Discrete input type STO safe torque off, 24 V DC, impedance: 1.5 kOhm
DI1...DI6 logic inputs, 24 V DC (30 V)
DI5 programmable as pulse input: 0…30 kHz, 24 V DC (30 V)

network frequency 50...60 Hz

switching frequency 2...16 kHz adjustable
4...16 kHz with derating factor

with safety function safely limited speed (sls) True

Brake chopper integrated True

motor slip compensation Automatic whatever the load
Adjustable 0...300 %
Not available in voltage/frequency ratio (2 or 5 points)

Mounting mode Wall mount

Braking to standstill By DC injection

Discrete input number 7

Net weight 22.7 kg

Discrete output type Open collector DQ+ 0…1 kHz 30 V DC 100 mA
Open collector DQ- 0…1 kHz 30 V DC 100 mA

base load current at high overload 17.0 A

Operating position Vertical +/- 10 degree

communication port protocol Modbus serial
CANopen

Discrete output number 3

depth 335 mm

line current 26.5 A at 380 V (heavy duty)
18.7 A at 500 V (heavy duty)

power dissipation in w Self-cooled: 229.0 W at 380 V, switching frequency 4 kHz

Pollution degree 3

nominal switching frequency 4 kHz

maximum output frequency 0.599 kHz

Maximum input current 26.5 A

Maximum output voltage 500 V

Method of access Slave CANopen

synchronous motor control profile Vector control without sensor

apparent power 16.2 kVA at 500 V (heavy duty)

acceleration and deceleration ramps Linear
U
S
CUS
Ramp switching
Acceleration/deceleration ramp adaptation
Acceleration/deceleration automatic stop with DC injection

transient overtorque 170…200 % of nominal motor torque

Nominal output current 17.0 A

Protection type Input phase breaks: drive
Overcurrent between output phases and earth: drive
Overheating protection: drive
Short-circuit between motor phases: drive
Thermal protection: drive

Option card Communication module, CANopen
Communication module, EtherCAT
Communication module, Profibus DP V1
Communication module, PROFINET
Communication module, Ethernet Powerlink
Communication module, EtherNet/IP
Communication module, DeviceNet

relay output type Configurable relay logic R1A 1 NO electrical durability 100000 cycles
Configurable relay logic R1B 1 NC electrical durability 100000 cycles
Configurable relay logic R1C
Configurable relay logic R2A 1 NO electrical durability 100000 cycles
Configurable relay logic R2C

Prospective line isc 22 kA

Relative symmetric network frequency tolerance 5 %

With safety function safe direction (sdi) False

With safety function safe position (sp) False

With safety function safe speed monitor (ssm) False

With safety function safe torque off (sto) True

With safety function safely limited position (slp) False

With sft fct safe stop 2 (ss2) False

Environment

Ambient air temp for storage/transportation -25…70 °C

Environmental class (during operation) Class 3C3 according to IEC 60721-3-3
Class 3S2 according to IEC 60721-3-3

ip degree of protection IP65

Range of product Altivar Machine ATV320

ambient air temperature for operation -10…40 °C without derating
40…60 °C with derating factor

electromagnetic compatibility Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11

Maximum acceleration under shock impact (during operation) 150 m/s² at 11 ms

overvoltage category III

standards EN/IEC 61800-5-1

Maximum acceleration under vibrational stress (during operation) 10 m/s² at 13...200 Hz

Permitted relative humidity (during operation) Class 3K5 according to EN 60721-3

Maximum deflection under vibratory load (during operation) 1.5 mm at 2...13 Hz

Regulation loop Adjustable PID regulator

speed accuracy +/- 10 % of nominal slip 0.2 Tn to Tn