ATV212WU75N4 - Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55 - Schneider Electric
+/- 0.6 % (VIB) for a temperature variation 60 °C
+/- 1 % (FM) for a temperature variation 60 °C
5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)
2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)
2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)
C-Tick
NOM 117
UL
FLA, FLC 7 ms, tolerance +/- 0.5 ms for discrete output(s)
FLB, FLC 7 ms, tolerance +/- 0.5 ms for discrete output(s)
RY, RC 7 ms, tolerance +/- 0.5 ms for discrete output(s)
2.5 N.m, 22 lb.in (L1/R, L2/S, L3/T)
VIB configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bits
VIB configurable PTC probe: 0...6 probes, impedance: 1500 Ohm
VIA switch-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 10 bits
Flux vector control without sensor, standard
Voltage/frequency ratio, 5 points
Voltage/frequency ratio, 2 points
Voltage/frequency ratio - Energy Saving, quadratic U/f
Negative logic (sink) (F, R, RES), >= 16 V (state 0), <= 10 V (state 1)
FM switch-configurable current 0...20 mA, impedance: 970 Ohm, resolution 10 bits
R programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
RES programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
12...16 kHz with derating factor
Adjustable
Not available in voltage/frequency ratio motor control
Configurable relay logic: (FLB, FLC) NC - 100000 cycles
Configurable relay logic: (RY, RC) NO - 100000 cycles
Read device identification (43)
Write single register (06)
Time out setting from 0.1 to 100 s
Read holding registers (03) 2 words maximum
Monitoring inhibitable
Modbus
LonWorks
METASYS N2
APOGEE FLN
1 RJ45
14.7 A at 380 V
16 A at 460 V
L1/R, L2/S, L3/T: terminal 16 mm² / AWG 6
VIB: +/- 0.15 % of maximum value for input
FM: +/- 0.2 % for output
5092 V DC between control and power terminals
Internal supply: 24 V DC (21…27 V), <200 A, protection type: overload and short-circuit protection
Automatic based on the load
Thermal power stage: drive
Short-circuit between motor phases: drive
Input phase breaks: drive
Overcurrent between output phases and earth: drive
Overvoltages on the DC bus: drive
Break on the control circuit: drive
Against exceeding limit speed: drive
Line supply overvoltage and undervoltage: drive
Line supply undervoltage: drive
Against input phase loss: drive
Thermal protection: motor
Motor phase break: motor
With PTC probes: motor
Analog input: 0.024/50 Hz
2 ms +/- 0.5 ms R discrete
2 ms +/- 0.5 ms RES discrete
3.5 ms +/- 0.5 ms VIA analog
22 ms +/- 0.5 ms VIB analog
Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC
With UL Type 1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC
IP55 conforming to EN/IEC 60529
<= 1000 m without derating
40…50 °C (with derating factor)
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Classes 3S2 conforming to IEC 60721-3-3
IEC 61800-5-1
IEC 61800-3 environments 1 category C2
EN 61800-3 category C3
EN 61800-3 environments 1 category C3
EN 61800-3 category C2
IEC 61800-3 environments 2 category C2
IEC 61800-3 category C3
IEC 61800-3 environments 2 category C1
IEC 61800-3 category C2
EN 61800-5-1
EN 61800-3 environments 2 category C2
EN 61800-3 environments 1 category C1
IEC 61800-3 environments 1 category C1
EN 61800-3 environments 2 category C3
EN 61800-3
EN 55011 class A group 1
EN 61800-3 environments 1 category C2
IEC 61800-3 environments 2 category C3
IEC 61800-3
IEC 61800-3 environments 1 category C3
5…95 % without dripping water conforming to IEC 60068-2-3
1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-8
The ATV212WU75N4 - Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55 is designed to meet the conditions of industry experts, such as electrical contractors, cable technicians, facility upkeep providers, and primary equipment makers. ATV212WU75N4 affords outstanding efficiency and gain for specialists in the power systems industry. This Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55 and other Altivar 212 from Schneider Electric are in stock at the optimal price and shipment duration through baltelec.eu, a reliable distributor catering to practitioners in their purchasing needs.
Buyers who have purchased Schneider Electric Altivar 212 have steadily admired the brand's trustworthiness. It has been mentioned that the excellent productivity of ATV212WU75N4 - Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55 extends to a broad spectrum of use. Its excellent elements make it ideal solution to cater to varied requirements, guaranteeing the success of your industrial, tertiary, and automation contracts.
BaltElec commits in providing for industrial and tertiary professionals’ needs. We recognize the specific specifications and preferences of our customers in the field. By teaming up with us, your organization acquire access to the leading costs and delivery period of the top-of-the-line products like ATV212WU75N4 - Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55 from Schneider Electric at the lowest price. Baltelec account members take pleasure in exclusive discounts and priority service.
Move quickly and procure ATV212WU75N4 - Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55 at our verified and convenient digital marketplace. Don't delay in making this prudent choice that secures the paramount quality and meets the particular demands of contractors like your group.
If you encounter any worries or concerns about ATV212WU75N4 - Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55 or any other Schneider Electric products, call us or refer to our Support section section below. We have brought together answers to recurring requests for information to help you further in making an smart decision about industrial and tertiary electrical components.
Remember, ATV212WU75N4 - Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55 from Schneider Electric is unfailing, thrifty, and outstanding to opposing companies in the Altivar 212 category. Feel free to make it a part of your solution now. Snap up at baltele.eu, your reliable retailer for all your professional electrical equipment and automation needs.
In our Baltelec.eu virtual store you will spot Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55 - ATV212WU75N4 worth 1,388.85 €, which will be a secure and up-to-date solution for your demands. This goods is developed by the Schneider Electric brand using the modern technologies and complies with the peak standards of security and capacity. We extend produce from the Altivar 212 category that fuse endurance and workability, which is an fine election for various roles. Without consideration of whether you seek equipment for small production or for competent industrial exertion, Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55 will be a steadfast associate in your task.
Baltelec efforts to make the obtaining process as comfortable and fast as realizable for our purchasers. We offer detailed reports and high-quality pictures of Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55 so that you can make an conscious choice. A team of adepts is always ready to help you with any inquiries in the Altivar 212 section related to the selection and use of items. We are positive that Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55 will meet your needs and become an key element of your inventory for just 1,388.85 €.
What People Ask about ATV212WU75N4:
-
What are the benefits of ordering ATV212WU75N4 from BaltElec?
When your purchase ATV212WU75N4 - Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55 from baltelec.eu, you will receive genuine high-quality Schneider Electric Altivar 212 products at the best prices and delivery period. Moreover, loyal buyersenjoy additional savings and first-class attention.
-
Can Baltelec consult if Schneider Electric Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55 is the right choice for my needs?
To ensure that Schneider Electric ATV212WU75N4 is suitable for your drawings, we offer comprehensive details pertaining to product's technical specifications, features, and compatibility. You can find this information on the specific page of the item name. If you need more guidance, our customer service team stands ready to help you in reaching an informed decision.
-
Which warranty coverage is offered for ATV212WU75N4?
BALTELEC is committed to the reliability of the items we offer. The standard guarantee coverage for Schneider Electric Altivar 212 including Schneider Electric Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55 is 12 months. Nonetheless, it is subject depending on the specific item, product category, and may even be longer. You can discover comprehensive guarantee information on the Schneider Electric ATV212WU75N4 dedicated page or by reaching out to our customer service team.
-
Can you offer global shipping for Schneider Electric Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55 including other Schneider Electric products?
Yes. In addition to serving Estonia, Latvia, Lithuania and other European Union countries, we offer worldwide shipping for ATV212WU75N4 - Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55. Please keep in mind that delivery options, costs, and delivery schedule might differ depending on the shipping location. In the case of complex orders, kindly contact BALTELEC sales team.
-
Do Schneider Electric MBC offered by Baltelec.eu comply with international norms for security and reliability?
Yes. All Schneider Electric products offered at Baltelec online store adhere to international norms such as IEC 60898-1 and carry the CE certification. These standards guarantee that the products fulfill strict safety, technical, reliability, and performance requirements.
-
Can Baltelec.eu offer assistance on integrating renewable energy solutions, such as solar power systems or wind energy converters, into my projects?
Yes, sure! Baltelec website understands the importance of renewable energy integration within community. Our team of professionals can support you in picking the right Schneider Electric items, to integrate them into your renewable energy projects}. We can provide advice on integrating solar power systems, wind power converters, and additional sustainable options to maximize energy generation and efficiency.
-
Are there green options available within the Altivar 212 category to encourage green energy initiatives?
Certainly! Baltelec website provides a wide range of eco-friendly solutions in the category of Altivar 212 that align with environmental sustainability objectives. Our top-quality Schneider Electric products, such as the ATV212WU75N4 - Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55, are designed with environmental friendliness in mind. By incorporating these products into your electrical system, you can enhance energy usage and reduce environmental impact. Additionally, we provide attractive pricing for our green Schneider Electric products,, making them an economical choice for promoting sustainability.
-
Is Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55 sold by BALTELEC original?
Yes, we exclusively provide authentic Schneider Electric products, including but not limited to Variable speed drive ATV212 7.5kW 10hp 480V 3ph EMC class C2 IP55. We source our products solely through authorized distribution channels to assure their authenticity and superior quality.
