ATSU01N209LT - Soft starter for asynchronous motor ATSU01 9 A 200..480V 1.5..4 KW - Schneider Electric

Pending restock

151,72 € excl. VAT

188,14 € incl. VAT

Text About:

Soft starter for asynchronous motor ATSU01 9 A 200..480V 1.5..4 KW - Schneider Electric

In cart

188,14 €

SPECIFICATIONS

Main

Device short name ATSU01

Icl starter rating 9 A

product specific application Simple machine

[uc] control circuit voltage 24 V DC +/- 10 %

motor power kW 4 kW, 3 phases at 400 V
1.5 kW, 3 phases at 230 V

Complementary

maximum switching current Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load
Relay outputs: 2 A at 250 V AC AC-15 cos phi = 0.5 and L/R = 20 ms inductive load

Product certifications UL
C-Tick
CSA
CCC

starting torque 30...80 % of starting torque of motor connected directly on the line supply

Handle front plate colour 234 mm

Product or component type Soft starter

tightening torque 0.5 N.m
1.9…2.5 N.m

[us] rated supply voltage 200...480 V - 10...10 %

Assembly style With heat sink

Current consumption 65 mA

minimum switching current 10 mA at 6 V DC for relay outputs

marking CE

Discrete output current 2 A DC-13
3 A AC-15

Discrete input logic Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA

output voltage <= power supply voltage

width (w) 45 mm

Discrete input type Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm

function available Integrated bypass

network frequency 47.5...63 Hz

supply voltage limits 180…528 V

Discrete input voltage 24...40 V

Net weight 0.34 kg

Discrete output type Open collector logic LO1 end of starting signal
Relay outputs R1A, R1C NO

Discrete output voltage 24 V (voltage limits: 6...30 V) open collector logic

Operating position Vertical +/- 10 degree

Display type 1 LED (green) for starter powered up
1 LED (yellow) for nominal voltage reached

Motor power hp 2 hp, 3 phases at 230 V
5 hp, 3 phases at 460 V

depth 150 mm

power dissipation in w 1.5 W at full load and at end of starting
91.5 W in transient state

Motor power range ac-3 1.1…2 kW at 200…240 V 3 phases
2.2…3 kW at 380…440 V 3 phases
4…6 kW

Input output isolation Galvanic between power and control

Pollution degree 2 conforming to EN/IEC 60947-4-2

electrical connection 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit
Screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit
Screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit
Screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit
4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit
Screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit
4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit
Screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit

deceleration time symbol Adjustable from 1 to 10 s

Network number of phases 3 phases

Maximum switching voltage 440 V relay outputs

motor starter type Soft starter

Product destination Asynchronous motors

Shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27

Starting time 1 s / 100
5 s / 20
10 s / 10
Adjustable from 1 to 10 s

Supply frequency 50...60 Hz - 5...5 %

Type of start Start with voltage ramp

Utilisation category AC-53B conforming to EN/IEC 60947-4-2

Environment

Ambient air temp for storage/transportation -25…70 °C conforming to EN/IEC 60947-4-2

ip degree of protection IP20

operating altitude <= 1000 m without derating
> 1000 m with current derating of 2.2 % per additional 100 m

Range of product Altistart U01 and TeSys U

ambient air temperature for operation -10…40 °C (without derating)
40…50 °C (with current derating of 2 % per °C)

electromagnetic compatibility Conducted and radiated emissions level B conforming to CISPR 11
Conducted and radiated emissions level B conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
EMC immunity conforming to EN 50082-1
EMC immunity conforming to EN 50082-2
Harmonics conforming to IEC 1000-3-2
Harmonics conforming to IEC 1000-3-4
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Voltage/current impulse level 3 conforming to IEC 61000-4-5
Conducted and radiated emissions level 3 conforming to IEC 61000-4-6
Immunity to conducted interference caused by radio-electrical fields conforming to IEC 61000-4-11

standards EN/IEC 60947-4-2

relative humidity 5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3

vibration resistance 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6
1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6

Q&A and product info

Contact Us

Professional sales of electrical equipment in Estonia, Latvia, Lithuania, and Finland. Certified low-voltage components, circuit breakers, contactors, and industrial automation solutions. Same-day quotations and fast delivery across the Baltics and Finland.

+372 5326 4976

Mon–Fri 9:00–17:00

info@baltelec.eu

Response within 2 hours

Schneider Electric ATSU01N209LT is a industrial Altistart 01 solution designed for enterprises. BaltElec specializes in wholesale and supply in Estonia, Latvia, Lithuania, and Finland.

Original Schneider Electric product, certificates and compliance documents available.
Volume-based pricing – request a quote for larger quantities (MOQ may apply).
Fast delivery across the Baltics and Finland; cooperation with logistics partners.
Technical support and application suitability advice based on your requirements.

Price: Request a project quote. The price depends on quantity, delivery, and payment terms.

Altistart 01 specifications may vary by configuration. For an exact match, please send us your requirements or check the technical data sheet.

FAQ for ATSU01N209LT - Schneider Electric

Does BaltElec offer wholesale prices for ATSU01N209LT?

Yes, project discounts are available. Send us a list of required quantities (e.g. ATSU01N209LT, Schneider Electric, 10 pcs) and we’ll prepare a personalized quotation.
What is the availability and delivery time for ATSU01N209LT in the Baltics and Finland?

We provide fast turnaround for deliveries to Estonia, Latvia, Lithuania, and Finland. Exact lead time depends on configuration and batch availability, confirmed upon quotation.
Is ATSU01N209LT by Schneider Electric an authentic product?

Yes. We only sell Schneider Electric original products with manufacturer’s warranty. Compliance certificates are available on request.
Is ATSU01N209LT suitable for my Altistart 01 application?

We help confirm compatibility quickly. Please provide parameters (voltage, current, environment, standards), and we’ll compare them to Schneider Electric technical requirements.
How does delivery and invoicing work?

We deliver via courier to Estonia, Latvia, Lithuania, and Finland. Invoicing is done according to agreement; bulk purchases are priced individually.