ATS48C14Y - Soft starter for asynchronous motor, ATS48, 124 A, 208..690 V, 30..110 KW - Schneider Electric

Expected in 2-4 weeks

2 432,25 €

Text About:

Soft starter for asynchronous motor, ATS48, 124 A, 208..690 V, 30..110 KW - Schneider Electric

In cart

2 432,25 €

SPECIFICATIONS

Main

Device short name ATS48

product specific application Heavy duty industry and pumps

Ue power supply voltage 208...690 V - 15...10 %

motor power kW 110 kW at 660 V for standard applications
110 kW at 690 V for standard applications
30 kW at 230 V for severe applications
37 kW at 230 V for standard applications
55 kW at 400 V for severe applications
55 kW at 440 V for severe applications
75 kW at 400 V for standard applications
75 kW at 440 V for standard applications
75 kW at 500 V for severe applications
75 kW at 525 V for severe applications
90 kW at 500 V for standard applications
90 kW at 525 V for standard applications
90 kW at 660 V for severe applications
90 kW at 690 V for severe applications

Complementary

Product certifications UL
C-Tick
CSA
TCF
CCC
NOM 117
DNV
GOST
SEPRO

Handle front plate colour 340 mm

Product or component type Soft starter

Communication data link Serial

minimum switching current 10 mA at 6 V DC for relay outputs

marking CE

Discrete input logic Positive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA

width (w) 200 mm

Analogue output type Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm

Discrete input type PTC, 750 Ohm at 25 °C
(Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm

function available External bypass (optional)

Discrete input number 5

Net weight 12.4 kg

physical interface RS485 multidrop

Discrete output type (LO1) logic output 0 V common configurable
(LO2) logic output 0 V common configurable
(R1) relay outputs fault relay NO
(R2) relay outputs end of starting relay NO
(R3) relay outputs motor powered NO

Operating position Vertical +/- 10 degree

communication port protocol Modbus

Discrete output number 2

Motor power hp 100 hp at 460 V for standard applications
100 hp at 575 V for severe applications
125 hp at 575 V for standard applications
30 hp at 208 V for severe applications
40 hp at 208 V for standard applications
40 hp at 230 V for severe applications
50 hp at 230 V for standard applications
75 hp at 460 V for severe applications

connector type 1 RJ45

depth 265 mm

device connection In the motor supply line

Product destination Asynchronous motors

Utilisation category AC-53A

Protection type Phase failure: line
Thermal protection: motor
Thermal protection: starter

Transmission rate 4800, 9600 or 19200 bps

Power supply frequency 50...60 Hz - 5...5 %

Environment

Ambient air temp for storage/transportation -25…70 °C

operating altitude <= 1000 m without derating
> 1000...2000 m with current derating of 2.2 % per additional 100 m

Range of product Altistart 48

ambient air temperature for operation 40…60 °C (with current derating of 2 % per °C)
-10…40 °C (without derating)

electromagnetic compatibility Conducted and radiated emissions level A conforming to IEC 60947-4-2
Conducted and radiated emissions level B conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Voltage/current impulse level 3 conforming to IEC 61000-4-5

standards EN/IEC 60947-4-2

relative humidity 0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3