ATS22D75Q - Soft starterATS22control 220Vpower 230V(18.5kW)/400...440V(37kW) - Schneider Electric

Expected in 2-4 weeks

ATS22D75Q - Soft starterATS22control 220Vpower 230V(18.5kW)/400...440V(37kW) - Schneider Electric

971,32 € excl. VAT

1 185,01 € incl. VAT

Text About:

Soft starterATS22control 220Vpower 230V(18.5kW)/400...440V(37kW) - Schneider Electric

In cart

1 185,01 €

SPECIFICATIONS

Main

Icl starter rating 75 A for connection in the motor supply line for standard applications

product specific application Pumps and fans

[uc] control circuit voltage 230 V - 15...10 % 50/60 Hz

factory setting current 69 A

component name ATS22

motor power kW 37 kW 400 V
37 kW 440 V
18.5 kW 230 V

Complementary

control circuit consumption 20 W

maximum switching current 5 A 250 V AC resistive 1 relay outputs
5 A 30 V DC resistive 1 relay outputs
2 A 250 V AC inductive 0.4 20 ms relay outputs
2 A 30 V DC inductive 7 ms relay outputs

Product certifications CSA
UL
GOST
CCC
C-Tick

Handle front plate colour 295 mm

Product or component type Soft starter

[us] rated supply voltage 230...440 V - 15...10 %

Assembly style With heat sink

Communication data link Serial

minimum switching current 100 mA at 12 V DC (relay outputs)

noise level 45 dB

output current 0.4...1 Icl adjustable

marking CE

ptc probe input 750 Ohm

Discrete input logic Positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA

width (w) 145 mm

Discrete input type (LI1, LI2, LI3) logic, 5 mA 4.3 kOhm

function available Internal bypass

network frequency 45...66 Hz

supply voltage limits 195…484 V

Discrete input voltage 24 V <= 30 V

Discrete input number 3

Net weight 12 kg

physical interface RS485 multidrop

Discrete output type Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O

Operating position Vertical +/- 10 degree

communication port protocol Modbus

Discrete output number 2

connector type 1 RJ45

depth 207 mm

power dissipation in w 63 W for standard applications

Motor power range ac-3 15…25 kW at 200…240 V 3 phases
30…50 kW at 380…440 V 3 phases

Pollution degree Level 2 conforming to IEC 60664-1

Installed device 31

Network number of phases 3 phases

device connection In the motor supply line
To the motor delta terminals

motor starter type Soft starter

Product destination Asynchronous motors

Shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27

Supply frequency 50...60 Hz - 10...10 %

Type of start Start with torque control (current limited to 3.5 In)

Utilisation category AC-53A

Protection type Phase failure: line
Thermal protection: motor
Thermal protection: starter

Transmission rate 4800, 9600 or 19200 bps

Type of cooling Forced convection

Environment

Ambient air temp for storage/transportation -25…70 °C

ip degree of protection IP20

operating altitude <= 1000 m without derating
> 1000...< 2000 m with current derating of 2.2 % per additional 100 m

Range of product Altistart 22

ambient air temperature for operation -10…40 °C (without derating)
40…60 °C (with current derating 2.2 % per °C)

electromagnetic compatibility Conducted and radiated emissions level A conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Voltage/current impulse level 3 conforming to IEC 61000-4-5

standards EN/IEC 60947-4-2

relative humidity 0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3

vibration resistance 1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6