ATS22C41S6U - Soft starterATS22ctrl110Vpower208V(125hp)/230V(150hp)/460V(300hp)/575V(350hp) - Schneider Electric

Expected in 2-4 weeks

ATS22C41S6U - Soft starterATS22ctrl110Vpower208V(125hp)/230V(150hp)/460V(300hp)/575V(350hp) - Schneider Electric

3 973,15 € excl. VAT

4 847,24 € incl. VAT

Text About:

Soft starterATS22ctrl110Vpower208V(125hp)/230V(150hp)/460V(300hp)/575V(350hp) - Schneider Electric

In cart

4 847,24 €

SPECIFICATIONS

Main

Icl starter rating 410 A for connection in the motor supply line for standard applications

product specific application Pumps and fans

[uc] control circuit voltage 110 V - 15...10 % 50/60 Hz

factory setting current 361 A

component name ATS22

Complementary

control circuit consumption 20 W

maximum switching current 5 A 250 V AC resistive 1 relay outputs
5 A 30 V DC resistive 1 relay outputs
2 A 250 V AC inductive 0.4 20 ms relay outputs
2 A 30 V DC inductive 7 ms relay outputs

Product certifications UL
CSA
CCC
GOST
C-Tick

Handle front plate colour 425 mm

Product or component type Soft starter

[us] rated supply voltage 208...600 V - 15...10 %

Assembly style With heat sink

Communication data link Serial

minimum switching current 100 mA at 12 V DC (relay outputs)

noise level 56 dB

output current 0.4...1 Icl adjustable

marking CE

ptc probe input 750 Ohm

Discrete input logic Positive logic LI1, LI2, LI3 at State 0: < 20 V and <= 15 mA at State 1: > 79 V, <= 2 mA

width (w) 206 mm

Discrete input type (LI1, LI2, LI3) logic, 5 mA 20 kOhm

function available Internal bypass

network frequency 45...66 Hz

supply voltage limits 177…660 V

Discrete input voltage 110 V <= 121 V

Discrete input number 3

Net weight 33 kg

physical interface RS485 multidrop

Discrete output type Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O

Operating position Vertical +/- 10 degree

communication port protocol Modbus

Discrete output number 2

Motor power hp 125 hp 208 V
150 hp 230 V
300 hp 460 V
350 hp 575 V

connector type 1 RJ45

depth 299 mm

power dissipation in w 177 W for standard applications

Pollution degree Level 2 conforming to IEC 60664-1

Installed device 31

Network number of phases 3 phases

device connection In the motor supply line

Product destination Asynchronous motors

Shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27

Supply frequency 50...60 Hz - 10...10 %

Type of start Start with torque control (current limited to 3.5 In)

Utilisation category AC-53A

Protection type Phase failure: line
Thermal protection: motor
Thermal protection: starter

Transmission rate 4800, 9600 or 19200 bps

Type of cooling Forced convection

Environment

Ambient air temp for storage/transportation -25…70 °C

ip degree of protection IP00

operating altitude <= 1000 m without derating
> 1000...< 2000 m with current derating of 2.2 % per additional 100 m

Range of product Altistart 22

ambient air temperature for operation -10…40 °C (without derating)
40…60 °C (with current derating 2.2 % per °C)

electromagnetic compatibility Conducted and radiated emissions level A conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Voltage/current impulse level 3 conforming to IEC 61000-4-5

standards EN/IEC 60947-4-2

relative humidity 0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3

vibration resistance 1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6