ATS01N209QN - Soft starter for asynchronous motor ATS01 9 A 380..415 V 4 KW - Schneider Electric

Pending restock

ATS01N209QN - Soft starter for asynchronous motor ATS01 9 A 380..415 V 4 KW - Schneider Electric

149,24 € excl. VAT

185,06 € incl. VAT

Text About:

Soft starter for asynchronous motor ATS01 9 A 380..415 V 4 KW - Schneider Electric

In cart

185,06 €

SPECIFICATIONS

Main

Device short name ATS01

Icl starter rating 9 A

product specific application Simple machine

[uc] control circuit voltage Built into the starter

motor power kW 4 kW, 3 phases at 380...415 V

Complementary

compatibility code ATS01N2

maximum switching current Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load
Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load

Product certifications GOST
B44.1-96/ASME A17.5 for starter wired to the motor delta terminal
CCC
CSA
C-Tick
UL

starting torque 30...80 % of starting torque of motor connected directly on the line supply

Handle front plate colour 124 mm

Product or component type Soft starter

tightening torque 0.5 N.m
1.9…2.5 N.m

[us] rated supply voltage 380...415 V - 10...10 %

Assembly style With heat sink

Current consumption 45 A at nominal load

minimum switching current 10 mA at 6 V DC for relay outputs

marking CE

Discrete output current 2 A DC-13
3 A AC-15

Discrete input logic Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA

output voltage <= power supply voltage

width (w) 45 mm

Discrete input type Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm

function available Integrated bypass

network frequency 47.5...63 Hz

supply voltage limits 342…456 V

Discrete input voltage 24...40 V

Net weight 0.42 kg

Discrete output type Open collector logic LO1 end of starting signal
Relay outputs R1A, R1C NO

Discrete output voltage 24 V (voltage limits: 6...30 V) open collector logic

Operating position Vertical +/- 10 degree

Display type 1 LED (green) for starter powered up
1 LED (yellow) for nominal voltage reached

depth 131 mm

power dissipation in w 4 W at full load and at end of starting
94 W in transient state

Motor power range ac-3 4…6 kW at 380…440 V 3 phases

Pollution degree 2 conforming to EN/IEC 60947-4-2

electrical connection 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit
Screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit
Screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit
Screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit
4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit
Screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit
4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit
Screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit

deceleration time symbol Adjustable from 1 to 10 s

Network number of phases 3 phases

motor starter type Soft starter

Product destination Asynchronous motors

Shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27

Starting time 1 s / 100
5 s / 20
10 s / 10
Adjustable from 1 to 10 s

Supply frequency 50...60 Hz - 5...5 %

Type of start Start with voltage ramp

Utilisation category AC-53B conforming to EN/IEC 60947-4-2

Environment

Ambient air temp for storage/transportation -25…70 °C conforming to EN/IEC 60947-4-2

ip degree of protection IP20

operating altitude <= 1000 m without derating
> 1000 m with current derating of 2.2 % per additional 100 m

Range of product Altistart 01

ambient air temperature for operation -10…40 °C (without derating)
40…50 °C (with current derating of 2 % per °C)

electromagnetic compatibility Conducted and radiated emissions level B conforming to CISPR 11
Conducted and radiated emissions level B conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
EMC immunity conforming to EN 50082-1
EMC immunity conforming to EN 50082-2
Harmonics conforming to IEC 1000-3-2
Harmonics conforming to IEC 1000-3-4
Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11
Voltage/current impulse level 3 conforming to IEC 61000-4-5

standards EN/IEC 60947-4-2

relative humidity 5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3

vibration resistance 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6
1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6

Q&A and product info

Contact Us

Professional sales of electrical equipment in Estonia, Latvia, Lithuania, and Finland. Certified low-voltage components, circuit breakers, contactors, and industrial automation solutions. Same-day quotations and fast delivery across the Baltics and Finland.

+372 5326 4976

Mon–Fri 9:00–17:00

info@baltelec.eu

Response within 2 hours

ATS01N209QN Schneider Electric is a industrial Altistart 01 solution designed for companies. BaltElec specializes in volume-based sales and supply in Estonia, Latvia, Lithuania, and Finland.

Original Schneider Electric product, documentation available on request.
Volume-based pricing – request a quote for larger quantities (MOQ may apply).
Efficient logistics across the Baltics and Finland; cooperation with trusted couriers.
Technical support and selection assistance based on your requirements.

Pricing: Request a special offer. The price depends on quantity, delivery, and payment terms.

Altistart 01 specifications may vary by model. For an exact match, please send us your requirements or check the technical data sheet.

FAQ for ATS01N209QN - Schneider Electric

Does your company provide wholesale prices for ATS01N209QN?

Yes, volume-based pricing are available. Send us a list of required quantities (e.g. ATS01N209QN, Schneider Electric, 10 pcs) and we’ll prepare a project-specific quotation.
What is the availability and delivery time for ATS01N209QN in the Baltics and Finland?

We provide reliable logistics for deliveries to Estonia, Latvia, Lithuania, and Finland. Exact lead time depends on quantity and stock level, confirmed upon quotation.
Is ATS01N209QN by Schneider Electric an authentic product?

Yes. We only sell Schneider Electric authentic products with factory warranty. Compliance certificates are available on request.
Is ATS01N209QN suitable for my Altistart 01 project?

We help confirm compatibility quickly. Please provide conditions (voltage, current, environment, standards), and we’ll compare them to Schneider Electric technical requirements.
How does shipping and invoicing work?

We deliver via courier to Estonia, Latvia, Lithuania, and Finland. Invoicing is done according to agreement; bulk purchases are priced individually.