Buy Regulated Power Supply, 100240V AC, 12V 10 A, single phase, Optimized - ABLS1A12100, Schneider Electric ⚡️ Balt-Elec

Main

Nominal input voltage 100...240 V AC single phase
100...240 V AC 2 phases
140...340 V DC

Power supply output current 10 A

Power supply type Regulated switch mode

service life 10 year(s)

Variant option Optimized

Complementary

output coupling Parallel
Serial

Product certifications CE
CUL listed
CUL recognized
RCM
CB Scheme
EAC
KC

Handle front plate colour 123.6 mm

maximum leakage current 1 mA 240 V AC

power factor 0.55 at 115 V AC
0.45 at 230 V AC

Product or component type Power supply

Current consumption < 2.5 A 115 V AC
< 1.4 A 230 V AC
< 1.3 A 140 V DC

inrush current 30.0 A at 115 V
60.0 A at 230 V

Connections - terminals Screw connection: 0.5...4 mm², (AWG 20...AWG 12) without wire end ferrule for output
Screw connection: 0.5...2.5 mm², (AWG 20...AWG 14) with wire end ferrule for output
Screw connection: 0.75...4 mm², (AWG 18...AWG 12) without wire end ferrule for input
Screw connection: 0.75...4 mm², (AWG 18...AWG 12) with wire end ferrule for input

Efficiency 84 % at 115 V AC
86 % at 230 V AC

Enclosure material Aluminium

Electrical shock protection class Class I

nominal network frequency 50…60 Hz

output voltage 12 V DC

width (w) 40 mm

input voltage limits 85...264 V AC (without temperature derating)
120...375 V DC (without temperature derating)
85…120 V DC (with temperature derating)

line and load regulation < 0.5 % network 0 to 100 % load at 25 °C
< 1 % network full voltage range in line at 25 °C

Net weight 0.52 kg

holding time > 20 ms 115 V AC
> 40 ms 230 V AC

residual ripple < 120 mV

Mounting support Top hat type TH35-15 rail conforming to IEC 60715
Top hat type TH35-7.5 rail conforming to IEC 60715
Double-profile DIN rail

depth 117.6 mm

Meantime between failure [mtbf] 700000 h at 25 °C, full load conforming to SR 332

power dissipation in w 25 W

Network system compatibility TN
TT
IT

Pollution degree 2

output voltage adjustment 11...14 V

Rated power in w 120 W

dielectric strength 3000 V AC with input to output

output protection type Against overload and short-circuits, protection technology: automatic reset
Against over temperature, protection technology: manual reset
Against overvoltage, protection technology: manual reset

input protection type Integrated fuse (not interchangeable) 4 A
External protection (recommended) 20 A Curve C
External protection (recommended) 13 A Curve C

Shock resistance 100 m/s² for 11 ms

Startup with capacitive loads 8000 µF

Status led 1 LED (green) output voltage

Supply SELV conforming to EN/IEC 60950-1
SELV conforming to EN/IEC 60204-1
SELV conforming to IEC 60364-4-41

Turn-on time < 1 s

Environment

ip degree of protection IP20

operating altitude < 5000 m

Range of product Modicon Power Supply

ambient air temperature for operation -20…-10 °C with current derating of 2 % per °C mounting position A < 2000 m
-10…40 °C without derating mounting position A 115 V AC < 2000 m
-10…50 °C without derating mounting position A 230 V AC < 2000 m
40…70 °C with current derating of 1.67 % per °C mounting position A 115 V AC < 2000 m
50…70 °C with current derating of 2.5 % per °C mounting position A 230 V AC < 2000 m

Environmental characteristics 3M4 conforming to IEC 60721-3-3

standards EN 62368-1
EN/IEC 61010-1
EN 61010-2-201
EN/IEC 61204-3
EN 61000-6-1
EN 61000-6-2
EN 61000-6-3
EN 61000-6-4
EN 61000-3-2
EN 61000-3-3
UL 62368-1
UL 61010-1
UL 61010-2-201
CSA C22.2 No 62368-1
CSA C22.2 No 61010-1
CSA C22.2 No 61010-2-201
EN/IEC 62368-1

electromagnetic emission Conducted emissions conforming to EN 61000-6-3
Radiated emissions conforming to EN 61000-6-4

vibration resistance 3 mm (f= 2…9 Hz) conforming to IEC 60068-2-6
10 m/s² (f= 9…200 Hz) conforming to IEC 60068-2-6

electromagnetic immunity Immunity to electrostatic discharge - test level: 6 kV (contact discharge) conforming to EN/IEC 61000-4-2
Immunity to electrostatic discharge - test level: 9 kV (air discharge) conforming to EN/IEC 61000-4-2
Immunity to conducted RF disturbances - test level: 10 V/m (80 MHz...2 GHz) conforming to EN/IEC 61000-4-3
Immunity to conducted RF disturbances - test level: 5 V/m (2...2.7 GHz) conforming to EN/IEC 61000-4-3
Immunity to conducted RF disturbances - test level: 3 V/m (2.7...6 GHz) conforming to EN/IEC 61000-4-3
Immunity to fast transients - test level: 4 kV (on input-output) conforming to EN/IEC 61000-4-4
Surge immunity test - test level: 3 kV (between power supply and earth) conforming to EN/IEC 61000-4-5
Surge immunity test - test level: 1.5 kV (between phases) conforming to EN/IEC 61000-4-5
Immunity to conducted RF disturbances - test level: 10 V (0.15...80 MHz) conforming to EN/IEC 61000-4-6
Immunity to magnetic fields - test level: 30 A/m (50...60 Hz) conforming to EN/IEC 61000-4-8
Immunity to voltage dips conforming to EN/IEC 61000-4-11
Disturbing field emission conforming to EN 55016-2-3
Limits for harmonic current emissions conforming to EN 61000-3-2
Conducted disturbance emission conforming to EN 55016-1-2
Conducted disturbance emission conforming to EN 55016-2-1

ABLS1A12100 - Regulated Power Supply, 100240V AC, 12V 10 A, single phase, Optimized - Schneider Electric