ABLP1A12085 - Regulated Power Supply, 100...240V AC, 12V 8.5A, single phase, Panel Mount - Schneider Electric

Expected in 2-4 weeks

89,27 €

Text About:

Regulated Power Supply, 100...240V AC, 12V 8.5A, single phase, Panel Mount - Schneider Electric

In cart

89,27 €

SPECIFICATIONS

Main

Nominal input voltage 100...240 V AC single phase

Power supply output current 8.5 A

Power supply type Regulated switch mode

Variant option Panel mount

Complementary

output coupling Parallel
Serial

Product certifications CE
CULus
EAC
RCM
CB Scheme
KC

Handle front plate colour 30 mm

maximum leakage current 1 mA 240 V AC

power factor 0.55 at 115 V AC
0.45 at 230 V AC

Product or component type Power supply

Current consumption < 2.3 A 115 V AC
< 1.5 A 230 V AC

inrush current 45 A at 115 V
85 A at 230 V

Connections - terminals Screw connection: 0.75...2.5 mm², (AWG 18...AWG 14) without wire end ferrule
Screw connection: 0.75...1.5 mm², (AWG 18...AWG 16) with wire end ferrule

Efficiency 88 % at 230 V AC

Enclosure material Aluminium

Electrical shock protection class Class I

nominal network frequency 50…60 Hz

output voltage 12 V DC

width (w) 97 mm

input voltage limits 90...264 V AC

line and load regulation < 0.5 % network 0 to 100 % load at 25 °C
< 1 % network full voltage range in line at 25 °C

Net weight 0.3 kg

holding time > 20 ms 115 V AC
> 40 ms 230 V AC

residual ripple < 120 mV

Mounting support Top hat type TH35-15 rail conforming to IEC 60715
Top hat type TH35-7.5 rail conforming to IEC 60715
Double-profile DIN rail
panel mounting

depth 129 mm

Meantime between failure [mtbf] 700000 h at 25 °C, full load conforming to SR 332

power dissipation in w 21 W

Network system compatibility TN
TT
IT

Pollution degree 2

output voltage adjustment 10.8...13.2 V

Rated power in w 100 W

dielectric strength 3750 V AC with input to output

output protection type Against overload and short-circuits, protection technology: automatic reset
Against over temperature, protection technology: manual reset
Against overvoltage, protection technology: manual reset

input protection type Integrated fuse (not interchangeable) 4 A

Shock resistance 100 m/s² for 11 ms

Startup with capacitive loads 4000 µF

Status led 1 LED (green) output voltage

Supply SELV conforming to EN/IEC 60950-1
SELV conforming to EN/IEC 60204-1
SELV conforming to IEC 60364-4-41

Turn-on time < 500 ms

Environment

ip degree of protection IP10

operating altitude 5000 m

Range of product Modicon Power Supply

ambient air temperature for operation -30…50 °C without derating mounting position A, B, F, G < 2000 m
50…70 °C with current derating of 2 % per °C mounting position A, B, F, G < 2000 m

Environmental characteristics 3M4 conforming to IEC 60721-3-3

standards EN 62368-1
EN 61010-1
EN 61010-2-201
EN 61204-3
EN 61000-6-1
EN 61000-6-2
EN 61000-6-3
EN 61000-6-4
EN 61000-3-2
EN 61000-3-3
UL 62368-1
UL 61010-1
UL 61010-2-201
CSA C22.2 No 62368-1
CSA C22.2 No 61010-1
CSA C22.2 No 61010-2-201
EN/IEC 62368-1

electromagnetic emission Conducted emissions conforming to EN 61000-6-3
Radiated emissions conforming to EN 61000-6-4

vibration resistance 3 mm (f= 2…9 Hz) conforming to IEC 60068-2-6
10 m/s² (f= 9…200 Hz) conforming to IEC 60068-2-6

electromagnetic immunity Immunity to electrostatic discharge - test level: 6 kV (contact discharge) conforming to EN/IEC 61000-4-2
Immunity to electrostatic discharge - test level: 9 kV (air discharge) conforming to EN/IEC 61000-4-2
Immunity to conducted RF disturbances - test level: 10 V/m (80 MHz...2 GHz) conforming to EN/IEC 61000-4-3
Immunity to conducted RF disturbances - test level: 5 V/m (2...2.7 GHz) conforming to EN/IEC 61000-4-3
Immunity to conducted RF disturbances - test level: 3 V/m (2.7...6 GHz) conforming to EN/IEC 61000-4-3
Immunity to fast transients - test level: 4 kV (on input-output) conforming to EN/IEC 61000-4-4
Surge immunity test - test level: 3 kV (between power supply and earth) conforming to EN/IEC 61000-4-5
Surge immunity test - test level: 1.5 kV (between phases) conforming to EN/IEC 61000-4-5
Immunity to conducted RF disturbances - test level: 10 V (0.15...80 MHz) conforming to EN/IEC 61000-4-6
Immunity to magnetic fields - test level: 30 A/m (50...60 Hz) conforming to EN/IEC 61000-4-8
Immunity to voltage dips conforming to EN/IEC 61000-4-11
Disturbing field emission conforming to EN 55016-2-3
Limits for harmonic current emissions conforming to EN 61000-3-2
Conducted disturbance emission conforming to EN 55016-1-2
Conducted disturbance emission conforming to EN 55016-2-1