Buy STEP-PS/ 1AC/24DC/2.5 - 2868651, Phoenix Contact ⚡️ Balt-Elec

Additional Information

csa CSA-C22.2 No. 107.1-01

shipbuilding approval DNV GL (EMC B), ABS, LR, RINA, NK, BV

output 2.2 kV (Test Level 3 - asymmetrical)

Main

catalog page Page 280 (C-4-2019)

foot latch material POM (Polyoxymethylene)

mtbf (iec 61709, sn 29500) > 1061000 h (40 °C)

Number of phases 1.00

product family STEP POWER

gtin 4046356163224

Mounting type DIN rail mounting

Product type Power supply

item number 2868651

packing unit 1 pc

degree of protection IP20

product key CMPS13

weight per piece (excluding packing) 270 g

weight per piece (including packing) 331.6 g

Complementary

ac frequency range 45 Hz ... 65 Hz

assembly instructions alignable: 0 mm horizontally, 30 mm vertically

conductor cross section awg max. 12

connection in parallel yes, for redundancy and increased capacity

depth device depth (din rail mounting) 55 mm (Device depth (DIN rail mounting))

note on status display UOUT > 21.5 V: LED lights up

status display "DC OK" LED green

conductor cross section awg min. 24

connection in series yes

connection method Screw connection

frequency range 2 GHz ... 3 GHz

frequency range dc 0 Hz

insulation voltage output / pe 500 V DC (routine test)

conductor cross section flexible max. 2.5 mm²

Country of origin VN

derating 55 °C ... 70 °C (2.5%/K)

horizontal pitch 4 Div.

input fuse 3.15 A (slow-blow, internal)

installation distance right/left 0 mm / 0 mm

operating voltage display Green LED

protective circuit Transient surge protection; Varistor

types of signaling LED

with protective coating No

conductor cross section flexible min. 0.2 mm²

Handle front plate colour 90 mm

input voltage range ac 85 V AC ... 264 V AC

installation distance top/bottom 30 mm / 30 mm

conductor cross section, rigid max. 2.5 mm²

feedback voltage resistance ≤ 35 V DC

input voltage range dc 95 V DC ... 250 V DC

inrush current < 15 A (typical)

maximum no-load power dissipation < 0.7 W

conductor cross section, rigid min. 0.2 mm²

Efficiency > 86 % (for 230 V AC and nominal values)

typical response time < 0.5 s

inrush current integral (i2t) < 0.6 A2s

nominal input voltage range 100 V AC ... 240 V AC

nominal output voltage 24 V DC ±1 %

nominal power consumption 124.3 VA

output characteristic U/I

output current imax 4.4 A

output power 60 W

tightening torque max 0.6 Nm

width (w) 72 mm

power factor (cos phi) 0.56

screw thread M3

tightening torque, min 0.5 Nm

voltage type of supply voltage AC/DC

peak switching voltages nominal load < 40 mVPP (20 MHz)

recommended breaker for input protection 6 A ... 16 A (Characteristics B, C, D, K)

stripping length 6.5 mm

protection against overvoltage at the output (ovp) ≤ 35 V DC

Minimum order quantity 1 pc

power loss nominal load max. 9.9 W

residual ripple < 80 mVPP (20 MHz)

rise time < 0.5 s (UOUT (10 % ... 90 %))

setting range of the output voltage (uset) 22.5 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)

Housing material Polycarbonate

mounting position horizontal DIN rail NS 35, EN 60715

Environment

Ambient air temp for storage/transportation -40 °C ... 85 °C

china rohs Environmentally Friendly Use Period = 25;

comments Criterion A

Customs tariff number 85044083

degree of pollution 2

eclass-11.0 27040701

protection class II (in closed control cabinet)

Specifications - Environmental Product Compliance: For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

standards/regulations EN 61000-6-3

ambient air temperature for operation -25 °C ... 70 °C (> 55° C derating : 2.5%/K)

contact discharge 6 kV (Test Level 3)

eclass-12.0 27040701

electromagnetic compatibility Conformance with EMC Directive 2014/30/EU

ETIM - 8 EC002540

overvoltage category III

rail applications EN 50121-4

reach svhc Lead 7439-92-1

standard - electrical safety IEC 62368-1 (SELV)

climatic class 3K3 (in acc. with EN 60721)

discharge in air 8 kV (Test Level 3)

eclass-13.0 27040701

noise immunity EN 61000-6-2:2005

standard - safe isolation DIN VDE 0100-410

max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)

emitted radio interference in acc. with en 55011 EN 55011 (EN 55022) class B used in industry and residential area / EMC 1

standard - safety of transformers EN 61558-2-16

unspsc 21.0 39121000

input 4 kV (Test Level 4 - asymmetrical)

shock 18 ms, 30g, in each space direction (according to IEC 60068-2-27)

standard – electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV)

low voltage directive Conformance with Low Voltage Directive 2014/35/EC

standard – limitation of mains harmonic currents EN 61000-3-2

standard – protection against shock currents, basic requirements for protective separation in electrical equipment EN 50178

radio interference voltage in acc. with en 55011 EN 55011 (EN 55022) class B used in industry and residential area / EMC 1

standard – safety extra-low voltage IEC 62368-1 (SELV) und EN 60204-1 (PELV)

test field strength 10 V/m

2868651 - STEP-PS/ 1AC/24DC/2.5 - Phoenix Contact