1711725 - MKDS 3/ 2-5,08 - Phoenix Contact
Expected in 2-4 weeks
SPECIFICATIONS
Additional Information
note on application
For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing).
Main
catalog page
Page 105 (C-1-2013)
number of positions
2
color (housing)
green (6021)
flammability rating according to ul 94
V0
insulating material
PA
set comprises
2940032 EMG 45-LG/SET
product family
MKDS 3
cti according to iec 60112
600
gtin
4017918023713
Mounting type
Wave soldering
number of potentials
2
number of rows
1
Product type
Printed circuit board terminal
item number
1711725
glow wire flammability index gwfi according to en 60695-2-12
850
nominal cross section
2.5 mm²
pin layout
Linear pinning
type of packaging
packed in cardboard
glow wire ignition temperature gwit according to en 60695-2-13
775
packing unit
100 pc
product key
AAMFIB
insulating material group
I
product line
COMBICON Terminals M
weight per piece (excluding packing)
3.964 g
metal surface soldering area (top layer)
Tin (4 - 8 µm Sn)
weight per piece (including packing)
3.992 g
metal surface terminal point (top layer)
Tin (4 - 8 µm Sn)
solder pins per potential
1
surface characteristics
Tin-plated
temperature for the ball pressure test according to en 60695-10-2
125 °C
Complementary
2 conductors with same cross section, flexible
0.2 mm² ... 1.5 mm²
drive form screw head
Slotted (L)
nominal current in
24 A
2 conductors with same cross section, flexible, with ferrule without plastic sleeve
0.25 mm² ... 0.75 mm²
connection method
Screw connection with tension sleeve
installed height
18 mm
nominal voltage un
400 V
number of connections
2
2 conductors with same cross section, solid
0.2 mm² ... 1.5 mm²
conductor cross section, flexible [awg]
0.2 mm² ... 2.5 mm²
Country of origin
DE
length [l]
11.2 mm
process
Wave soldering
rated surge voltage (ii/2)
4 kV
2 conductors with the same cross section, flexible, with twin ferrule with plastic sleeve
0.5 mm² ... 1.5 mm²
conductor cross section, rigid [awg]
0.2 mm² ... 4 mm²
Handle front plate colour
23 mm
pin spacing
15.24 mm
rated surge voltage (iii/2)
4 kV
tightening torque
0.5 Nm ... 0.6 Nm
conductor cross section awg
24 ... 12
Pitch
5.08 mm
rated surge voltage (iii/3)
4 kV
solder pin length [p]
5 mm
rated voltage (ii/2)
630 V
conductor cross section flexible, with ferrule without plastic sleeve
0.25 mm² ... 2.5 mm²
rated voltage (iii/2)
400 V
rated voltage (iii/3)
250 V
conductor cross section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 2.5 mm²
note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
contact material
Cu alloy
width (w)
10.16 mm
Colour
()
stripping length
8 mm
Minimum order quantity
1 pc
Network type
PC terminal block can be aligned
Environment
Ambient air temp for storage/transportation
-40 °C ... 70 °C
Ambient air temperature for installation
-5 °C ... 100 °C
china rohs
Environmentally friendly use period: unlimited = EFUP-e
comparative tracking index (iec 60112)
CTI 600
Customs tariff number
85369010
degree of pollution
3
eclass-11.0
27460101
Specifications - Environmental Product Compliance:
No hazardous substances above threshold values
ambient air temperature for operation
-40 °C ... 105 °C (Depending on the current carrying capacity/derating curve)
eclass-12.0
27460101
ETIM - 8
EC002643
minimum clearance value - non-homogenous field (ii/2)
3 mm
eclass-13.0
27460101
minimum clearance value - non-homogenous field (iii/2)
3 mm
minimum clearance value - non-homogenous field (iii/3)
3 mm
relative humidity (storage/transport)
30 % ... 70 %
minimum creepage distance (ii/2)
3.2 mm
unspsc 21.0
39121400
minimum creepage distance (iii/2)
3 mm
minimum creepage distance (iii/3)
3.2 mm
note on connection cross section
With connected conductor 4 mm² (solid).
rated insulation voltage (ii/2)
630 V
rated insulation voltage (iii/2)
400 V
rated insulation voltage (iii/3)
250 V
specification
IEC 60947-1:2007-06 + A1:2010-12 + A2:2014-09
Recently viewed
